Brake Control System :: Automatic Brake Hold
- System Description
- Ecu Diagnosis Information. Chassis Control Module
- Basic Inspection. Diagnosis and Repair Work Flow
- Component Parts /circuit Diagnosis
- Symptom Diagnosis. Does Not Operate
- Removal and Installation
Ecu Diagnosis Information. Chassis Control Module Nissan Ariya
List of ECU Reference
| ECU | Reference |
|---|---|
| Chassis control module | DTC Index |
| Physical Values | |
| Values On The Diagnosis Tool | |
| Fail-safe | |
| DTC Inspection Priority Chart |
Basic Inspection. Diagnosis and Repair Work Flow Nissan Ariya first Gen
Work Flow
DETAILED FLOW
INTERVIEW FROM THE CUSTOMER
Clarify customer complaints before inspection. First of all, perform an interview utilizing diagnostic work sheet and reproduce the symptom as well as fully understand it. Ask customer about his/her complaints carefully. Check symptoms by driving Nissan Ariya vehicle with customer, if necessary. Refer to Diagnostic Work Sheet.
>>GO TO 2.
CHECK SYMPTOM
Reproduce the symptom that is indicated by the customer, based on the information from the customer obtained by the interview. Also check that the symptom is not caused by fail-safe mode. Refer to Fail-safe.
>>GO TO 3.
PERFORM SELF-DIAGNOSIS
With CONSULT
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC detected?
YES>>Record or print self-diagnosis results and freeze frame data (FFD). GO TO 4.
NO>>INSPECTION END
PERFORM DTC DIAGNOSIS PROCEDURE
With CONSULT
Perform confirmation procedure for the error-detected system.
Is DTC detected?
YES>>GO TO 5.
NO>>Check harness and connectors based on the information obtained by the interview.
REPAIR OR REPLACE ERROR-DETECTED PARTS
Repair or replace error-detected parts.
Reconnect part or connector after repairing or replacing.
When DTC is detected, erase self-diagnosis results for “CHASSIS CONTROL”.
GO TO 6.
FINAL CHECK
With CONSULT
Check the reference value for “CHASSIS CONTROL”.
Recheck the symptom and check that the symptom is not reproduced on the same conditions.
Is the symptom reproduced?
YES>>GO TO 3.
NO>>INSPECTION END
Diagnostic Work Sheet
Description
In general, customers have their own criteria for a symptom. Therefore, it is important to understand the symptom and status well enough by interviewing the customer about the symptom carefully. To systemize all the information for the diagnosis, prepare the interview sheet referring to the interview points.
In some cases, multiple conditions that appear simultaneously may cause a DTC to be detected.
INTERVIEW SHEET SAMPLE
| Interview sheet | |||||
|---|---|---|---|---|---|
| Customer name | MR/MS | Registration number | Initial year registration | ||
| Nissan Ariya Vehicle type | VIN | ||||
| Storage date | Engine/ Traction motor | Mileage | km ( Mile) | ||
| Symptom | □ Does not operate ( ) function | ||||
| □ Warning lamp for ( ) turns ON. | |||||
| □ Noise □ Vibration | |||||
□ Other ( ) |
|||||
| First occurrence | □ Recently □ Other ( ) | ||||
| Frequency of occurrence | □ Always □ Under a certain conditions of □ Sometimes ( time(s)/day) | ||||
| Climate conditions | □ Irrelevant | ||||
| Weather | □ Fine □ Cloud □ Rain □Snow □ Others ( ) | ||||
| Temperature | □ Hot □Warm □ Cool □ Cold □ Temperature [Approx. °C ( °F)] | ||||
| Relative humidity | □ High □ Moderate □ Low | ||||
| Road conditions | □ Urban area □ Suburb area □ Highway □ Mountainous road (uphill or downhill) □ Rough road |
||||
| Operating condition, etc. | □Irrelevant □When traction motor starts □ During idling □ During driving □ During acceleration □ At constant speed driving □ During deceleration □ During cornering (right curve or left curve) □ When steering wheel is steered (to right or to left) |
||||
| Other conditions | |||||
Nissan Ariya Vehicle equipment |
|||||
Memo |
|||||
Symptom Diagnosis. Does Not Operate Nissan Ariya 2026
Diagnosis Procedure
Automatic brake hold function does not operate when the operating conditions are satisfied.
PERFORM SELF-DIAGNOSIS (CHASSIS CONTROL MODULE)
With CONSULT
Perform self-diagnosis for “CHASSIS CONTROL”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>GO TO 2.
CHECK AUTOMATIC BRAKE HOLD SWITCH
Check the automatic brake hold switch. Refer to Component Function Check.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Replace the automatic brake hold switch. Refer to AUTOMATIC BRAKE HOLD SWITCH : Removal & Installation.
PERFORM SELF-DIAGNOSIS [ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT)]
With CONSULT
Perform self-diagnosis for “ABS”.
Is DTC detected?
YES>>Check the DTC. Refer to DTC Index.
NO>>Replace the chassis control module. Refer to CHASSIS CONTROL MODULE : Removal & Installation.