Ecu Diagnosis Information. Driver Lumbar Support Control Module
In this manual: Ecu Diagnosis Information. Driver Lumbar Support Control Module
~1min read
Reference Value
TERMINAL LAYOUT

PHYSICAL VALUES
Terminal No. (Wire color) | Description | Condition | Value (Approx.) | |||
|---|---|---|---|---|---|---|
| + | - | Signal name | Input/output | |||
1 (R) |
Ground | Battery power supply | Input | Always | Battery voltage | |
10 (B) |
Ground | Ground | — | Always | 0 V | |
80 (W) |
Ground | Lumbar support switch | Input | Lumbar support switch | Operate (forward) | 0.57 V |
| Operate (backward) | 0.24 V | |||||
| Operate (upward) | 3.42 V | |||||
| Operate (downward) | 1.32 V | |||||
| Release | 12.5 V | |||||
81 (L) |
Ground | Lumbar support switch ground | — | Always | 0 V | |
82 (Y) |
Ground | Lumbar support pump | Output | Lumbar support | Operate (forward/upward/downward) | 12 V |
| Other than the above | 0 – 1 V | |||||
83 (P) |
Ground | Lumbar support pump ground | — | Always | 0 – 1 V | |
84 (G) |
Ground | LIN | Input/Output | When the power consumption control of driver seat control unit is in wake-up state. | ![]() |
|
| When the power consumption control of driver seat control unit is in sleep state. | 12.5 V | |||||
Was this page helpful?
