Removal and Installation
- Hood
- Radiator Core Support
- Charge Port Lid
- Front Fender
- Front Door
- Rear Door
- Back Door
- Hood Lock
- Front Door Lock
- Rear Door Lock
- Back Door Lock
- Outside Key Antenna
- Intelligent Key Warning Buzzer
- Door Lock and Unlock Switch. Driver Side
- Intelligent Key Unit
- Intelligent Key Battery
- Back Door Opener Switch Assembly
- Automatic Back Door Control Unit
- Automatic Back Door Switch
- Automatic Back Door Close Switch Assembly
- Automatic Back Door Warning Buzzer
Intelligent Key Warning Buzzer Nissan Ariya: FE0
Removal and Installation
REMOVAL
Disconnect Intelligent Key warning buzzer harness connector.
Disengage clip from body frame, and then remove Intelligent Key warning buzzer
.

| : Clip |
INSTALLATION
Install in the reverse order of removal.
Door Lock and Unlock Switch. Driver Side Nissan Ariya 2023
Removal and Installation
REMOVAL
Remove power window switch finisher. Refer to Removal & Installation.
Disengage pawl and remove door lock and unlock switch (driver side)
from the power window switch finisher shown by the arrow in the figure.

: Pawl
INSTALLATION
Installation is in the reverse order of removal.
Intelligent Key Unit Nissan Ariya first Gen
Removal and Installation
REMOVAL
Remove the instrument pad B. Refer to Removal & Installation.
Remove the Intelligent Key unit fixing screws
and then remove Intelligent Key unit
.

INSTALLATION
Note the following item, and then install in the reverse order of removal.
Intelligent Key Battery Nissan Ariya 2023
Removal and Installation
Release the lock knob at the back of the Intelligent Key and remove the mechanical key.
Insert remover tool (A) wrapped with a cloth into the slit 1 of the corner and twist 2 it to separate the upper part from the lower part.

Replace the battery with new one.
Battery replacement :Coin-type lithium battery (CR2032) Align the tips of the upper and lower parts 1, and then push them together until it is securely closed 2.

Back Door Opener Switch Assembly Nissan Ariya SUV
Removal and Installation
REMOVAL
Remove rear combination lamp (back door side). Refer to Removal & Installation.
Disconnect back door opener switch assembly connector.
Remove back door opener switch assembly grommet
.
Pinch back door opener switch assembly
from both side (in the direction shown by arrow 1) and disengage tab. Press toward outside (in the direction shown by arrow 2) to remove from back door finisher.

: Pawl
INSTALLATION
Install in the reverse order of removal.
Automatic Back Door Control Unit Nissan Ariya
Removal and Installation
REMOVAL
Remove luggage side lower finisher RH. Refer to Removal & Installation.
Disconnect automatic back door control unit harness connector.
Remove the automatic back door control unit mounting bolts
, and then remove the automatic back door control unit
.

INSTALLATION
Note the following item, and then install in the reverse order of removal.
Automatic Back Door Switch Nissan Ariya first Gen
Removal and Installation
REMOVAL
Remove the instrument lower panel (driver side). Refer to Removal & Installation.
Remove screws
and then remove the switch bracket
from the instrument lower panel (driver side).

Disengage pawl and remove automatic back door switch
from switch bracket shown by the arrow in the figure.

| : Pawl |
INSTALLATION
Install in the reverse order of removal.
Automatic Back Door Close Switch Assembly Nissan Ariya
Removal and Installation
REMOVAL
Remove automatic back door switch finisher. Refer to Removal & Installation.
Remove automatic back door close switch assembly
and switch finisher B from switch finisher A.

Disengage pawl and remove automatic back door close switch assembly
from switch finisher B shown by the arrow in the figure.

| : Pawl |
INSTALLATION
Install in the reverse order of removal.
Automatic Back Door Warning Buzzer Nissan Ariya: FE0
Removal and Installation
REMOVAL
Remove rear bumper fascia. Refer to Removal & Installation.
Remove the automatic back door warning buzzer mounting nuts
, and then remove automatic back door warning buzzer
.

INSTALLATION
Install in the reverse order of removal.