System

In this manual: System
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
~18min read
  • Vehicle Charging System
  • Normal Charge Control
  • Quick Charge Control
  • Automatic 12v Battery Charge Control
  • Charge Port Control
  • Li-Ion Battery Charge Control
  • Power Voltage Variable Control System
  • Remove Charge Connector Warning

Vehicle Charging System Nissan Ariya 1st generation

System Description

System diagram

ComponentFunction
On-board charger Refer to Component Description.
VCM

Control related to Nissan Ariya vehicle charging system is integrated.

For detail Refer to Component Description.
CPLC Refer to Component Description.
Combination meter Charge connector lock system setting can be changed
EVSE (Charge cable) Refer to Component Description (120V/240V EVSE) or Component Description (120V EVSE).
Charging status indicator Refer to Component Description.
Immediate charging switch Refer to Component Description.
Charge port Refer to Component Description.
Charge port light Refer to Component Description.
Charge connector lock actuator Refer to Component Description.
Charge port lid opener actuator

Charge port lid is unlocked according to operation signal from VCM

For detail Refer to Charge Port Lid Actuator.

DESCRIPTION

Vehicle charging system is mainly controlled by VCM.

ItemDescriptionReference page
Li-ion battery charge control Automatically selects a charge mode that is suitable for the external power source and controls Li-ion battery charging. Refer to System Description.
Charge port control VCM performs comprehensive control to improve efficiency of charge work. Refer to System Description.
Variable voltage control system DC/DC converter output is changed according to command from VCM Refer to System Description.
Automatic 12V battery charge control DC/DC converter controlled by VCM command and 12 V battery is charged. Refer to System Description.

Setting information of vehicle charging system can be checked on "Vehicle information" screen of information display in combination meter.

Circuit Diagram

Fail-safe

ON-BOARD CHARGER

CONSULT displayFail safe operation
P0D22-00 Normal charge is stopped
P0D2A-00
P0D3A-00
P0D3B-00
P0D3F-00
P0D40-00
P0D4E-00
P0D4F-00
P0D53-00
P0D54-00
P0D67-00
P0D85-00
P0E5E-00
P1C50-43
P1C50-4B Normal charge is paused
P1C60-19 Normal charge is stopped
P1C61-82
P1C62-82
P1C63-97
P1C64-17
P1C64-38
U1D40-87
U2143-83
U2143-87
U2144-83
U2A0F-88

CPLC

CONSULT displayFail safe operation
B2B01-87 Quick charge is stopped
B2B02-87
B2B0C-68
B2B0D-68
B2B0E-68
B2B0F-68
B2B10-68
B2B11-68
B2B12-68
B2B13-68
B2B15-68
B2B17-68
B2B18-68
B2B19-68
B2B1A-68
B2B1C-68
B2B1D-87
B2B1E-68
B2B1F-04
U0079-00
U2143-87
U214F-87

DC/DC converter

CONSULT displayFail safe operation
P1AA8-A2 DC/DC converter output is stopped
P1AA8-A3
P1AA9-64 DC/DC converter output current is stopped
P1AAA-64
P1AAB-18
P1AAB-19
P1AAB-64
P1AAC-18
P1AAC-19
P1AAC-64
P1AAD-48 DC/DC converter output is stopped
P1AAE-31 DC/DC converter output current is stopped
P1AAE-39
P1AAE-3A
P1AAE-4B
P1AAF-31
P1AAF-39
P1AAF-3A
P1AAF-4B
P1AB0-64
P1AB2-16 DC/DC converter output is stopped
P1AB2-17
P1AB2-48
P1AB2-64
P1AB5-64
P1AB9-4B DC/DC converter output is stopped
P1ABA-16
P1ABA-17
P1ABB-17
P1ABB-48
P1ABC-16
P1ABC-17
P1ABD-19 DC/DC converter output current is stopped
P1ABE-19
P1ABF-05 DC/DC converter output is stopped
P1AC1-F0 DC/DC converter output current is stopped
P1AC1-F1
P1AC1-F2
P1AC1-F3
P1AC1-F4 DC/DC converter output is stopped
P1AC2-48
P1AC3-F2

DC/DC converter output current is limited.

P1AC3-F3
U1D50-88 DC/DC converter output voltage is fixed.
U2143-F1
  • High voltage is less than 30 V: DC/DC converter is sleep status.

  • High voltage is 30 V or more: Status of DC/DC converter is fixed to the status before DTC occurred.

U2143-F5 DC/DC converter output voltage is fixed.
U2143-F7
  • High voltage is less than 30 V: DC/DC converter is sleep status.

  • High voltage is 30 V or more: Status of DC/DC converter is fixed to the status before DTC occurred.

U2143-FB DC/DC converter output voltage is fixed.
U2143-FC
U2143-FD
  • High voltage is less than 30 V: DC/DC converter is sleep status.

  • High voltage is 30 V or more: Status of Dc/DC converter is fixed to the status before DTC occurred.

U2A0F-88 DC/DC converter output voltage is fixed.

Warning/Indicator/Chime list

ItemLocation/Function
Plug in indicator lamp For location, Refer to Design.
For function, Refer to Plug In Indicator Lamp.
ItemLocation/Function
Remove charge connector warning Refer to System Description.

Handling Precaution

HANDLING OF CHARGE CABLE, CHARGE PORT, AND CHARGE CONNECTOR

  • Never touch metal terminals of the charge port or the charge connector.

  • Never modify or disassemble control box, socket, charge cable, charge connector, or charge port.

  • Never apply excessive force to the charge cable.

    • Never pull.

    • Never twist.

    • Never drag.

    • Never place a heavy item on charge cable.

    • Never place near a heating device (heater, etc.).

  • Never drop or subject to strong impact.

  • When storing, be sure to attach the cap to the connector before storing.

  • When storing, store in a location away from direct sunlight, not exposed to rain or wind, and where dust and dirt do not enter.

  • Use only with a designated socket especially wired for EV/PHEV with NISSAN recommended work or equivalent means. (This is because there is an extremely high risk of electric shock if the ground line is connected incorrectly.)

  • Never allow the control box to be submerged in water.

  • If you have a pacemaker or implantable cardioverter-defibrillator (ICD) implant, keep a distance of at least 15 cm between you and the EVSE control box.

PRECAUTIONS FOR CHARGING

  • Use genuine NISSAN charge cables only.

  • Never use an extension cord or conversion adapter except genuine NISSAN adapter and exchangeable plug.

  • Be sure to use an independent specification current or higher charging station or socket.

    Charge cable Specification current
    120V EVSE (L1) 12A
    120V/240V EVSE with 120V outlet (L1/L2) 12A
    120V/240V EVSE with 240V outlet (L1/L2) 30A
    Charging device According to the charging device operation manual.

  • Never touch the plug, genuine NISSAN adapter or exchangeable plug with wet hands.

  • If the male terminal of EVSE plug, genuine NISSAN adapter or exchangeable plug is dirty or wet, wipe it with a clean, dry cloth.

  • If the female terminal of genuine NISSAN adapter or exchangeable plug is dirty or wet, clean it with an air blow gun.

  • Check that there is no foreign material such as water or dust in the charge port, charge connector, genuine NISSAN adapter or exchangeable plug.

  • Never use the charge cable if it is worn, or if there are any deep scratches or other damage where the core wires are visible.

  • Never use the EVSE charge connector, control box, plug, genuine NISSAN adapter or exchangeable plug if it is broken, scratched, cracked, or otherwise damaged.

  • Check that there is no rust, corrosion, or damage on the charge port, charge connector, genuine NISSAN adapter or exchangeable plug. Check that there is no loosening at the time of connection.

  • Never perform charging when the connection is heavily exposed to water.

  • Never perform charging with the body cover attached.

  • Never perform charging when there may be a risk of lightning.

  • Stop charging immediately when an unusual odor or smoke is found during charging.

  • Never place hand near the cooling fan during charging.

  • After charging, securely close the cover and lid of the charge port to prevent entry of water or dust.

  • To turn on READY after charging, operate after disconnecting the charge connector from the charge port.

  • To prevent electric shock or fire arising from electric leakage, use a waterproof plug with grounding connected to the ground fault interrupter.

  • Never connect to a socket providing other than the rated voltage.

  • For charging, never use a generator or any other power source other than specified.

  • When quick charging is performed, be sure to use a quick charger compatible with the Nissan Ariya vehicle.

EVSE

Charging device

Normal Charge Control Nissan Ariya 1st generation

System Description

System Diagram

Component partsFunction
VCM Controls normal charge according to each signal
On-board charger

Starts normal charge according to VCM command and supplies charge power to Li-ion battery.

Refer to Component Description.for detail of function.
LBC Transmits Li-ion battery status to VCM via CAN communication.
IPDM E/R Supplies power ON power to VCM
TCU Transmits timer set information to AV C/U
AV C/U
  • Transmits timer set information to BCM

  • Judges Nissan Ariya vehicle position information and switches timer charge ON/OFF.

Immediate charging switch Refer to Component Description.
EVSE Refer to Component Description (120V/240V EVSE) or Component Description (120V EVSE).
Combination meter When key switch is OFF, displays timer charge set information according to timer set information from BCM.
BCM Transmits charge permit request or prohibit request to VCM via CAN communication according to timer charge set information

BASIC CONTROL

When EVSE is connected at power switch OFF status, EVSE connection signal is transmitted to VCM. VCM that receives the signal determines as charging mode. VCM also determines the maximum charge power based on the Li-ion battery chargeable power signal received from LBC, the chargeable power signal received from on-board charger, and the maximum current request signal received from EVSE, and transmits the charge current command value to on-board charger determines the charge power based on charge current command value. VCM starts charge by turning ON the system main relays 1 and 2.

NORMAL CHARGE MODE

This mode performs charging by connecting EVSE (charge cable). Normal charge includes immediate charge mode, timer charge mode, and remote charge mode.

IMMEDIATE CHARGE MODE

This mode performs immediate charge as soon as EVSE is connected. If timer charge is not set, enter charge mode as soon as EVSE is connected. If timer charge is set, immediate charge mode is selected by pressing immediate charge switch.

  • When EVSE connection signal is transmitted to VCM, VCM judges that EVSE is connected and turns on-board charger ON to start charge immediately.

  • If timer is set, even when EVSE connection signal is transmitted to VCM, charge is not started immediately. If VCM detects immediate charge switch ON signal in this state, VCM judges as immediate charge mode and starts charge.

  • When the charge reaches specified amount and VCM receives Li-ion battery charge completion signal from LBC, VCM stops charge.

  • When pressing immediate charge switch, immediate charge is performed for 15 minutes. this mode does not reset even if charge connector is unplugged. To return to timer charge after pressing immediate charge switch, press immediate charge switch again during connecting charged connector.

TIMER MODE

BCM starts up automatically and starts charging at the set time.

ItemDescription
Timer charge 1, Timer charge 2, Timer charge 3
  • This mode starts and stops charging according to the timer that is set on VCM.

  • When VCM receives a Li-ion battery charge completion signal from LBC or at set finish time of timer charge, VCM stops charge.

Timer charge at home
  • Timer charge is only possible for normal charge at home.

  • Immediate charge is automatically selected for normal charge at except home.

REMOTE CHARGE MODE

This mode starts the charge by remote control with mobile tool.

  • When BCM transmits EV system activation request signal to VCM via CAN communication, VCM judges that remote charge mode is selected and starts charge.

  • When VCM receives Li-ion battery charge completion signal from LBC, VCM stops charge.

CANCEL CONDITIONS

VCM stops normal charge control when VCM detects that EVSE is disconnected.

In addition, when the following conditions are satisfied, VCM pauses normal charge and enters standby status.

  • When communication from EVSE and AC voltage are interrupted.

  • When EVSE connector release switch is ON.

  • When Li-ion battery temperature reaches the specified temperature or higher.

Quick Charge Control Nissan Ariya 2023

System Description

System Diagram

ComponentFunction
VCM Controls quick charge according to each signal. Connects with quick charger via quick charge port and receives each signal.
LBC Transmits Li-ion battery status to VCM via CAN communication.
Li-ion battery Built-in relay is operated according to signal fro VCM and LBC
Electric shift Transmits shift position signal to VCM via CAN communication.
IPDM E/R Supplies power ON power to VCM.
BCM Transmits Nissan Ariya vehicle status signal to VCM via CAN communication.
CPLC

Converts signal of quick charge communication between quick charger and Nissan Ariya vehicle.

For detail Refer to Component Description.

BASIC CONTROL

When quick charge connector is connected to quick charge port and start switch of quick charger is pressed, VCM detects start switch ON by quick charger start/stop signal 1. And then VCM activates F/S CHG relay, system main relay 1, system main relay 2 and quick charge relay to be ready for the quick charge.

—Next, VCM determines charge current request value based on Li-ion battery chargeable power signal received from LBC and quick charger output possible current signal received from quick charger.

Quick charger controls output power according to charge current request signal received from VCM.

When the charge amount reaches the specified amount and VCM receives Li-ion battery charge completion signal from LBC, VCM stops charge.

QUICK CHARGE MODE

This mode performs charging with quick charger. Even if charge is not completed, when the charge time set on the quick charger or the time-out (maximum 255 minutes) set on Nissan Ariya vehicle passes, charge is stopped.

Automatic 12v Battery Charge Control Nissan Ariya 2023

System Description

DESCRIPTION

When 12V battery remains uncharged condition, 12V battery automatic charge control automatically charges 12V battery and minimizes the 12V battery consumption by decreasing SOC.

For details of control, Refer to System Description.

Charge Port Control Nissan Ariya 1st generation

System Description

DESCRIPTION

Charge port control is performed by the VCM. This includes charge connector lock/unlock control which automatically locks charge connector during normal charge and at other times, and charge port light control which automatically turns ON LED illumination inside port to improve charge port visibility when charge connector is inserted or removed. Refer to System Description.

Li-Ion Battery Charge Control Nissan Ariya first Gen

System Description

OUTLINE

There are two types of Li-ion battery charge. Normal charge converts commercial power supply to DC power, and quick charge uses special charger.

  • For information of specification of charge mode, Refer to Specifications.

  • "Expected charge time" can be confirmed on Nissan Ariya vehicle information display in the combination meter.

  • "Expected charge time" can be set on Nissan Ariya vehicle information display in combination meter. For the information display, Refer to System Description.

DESCRIPTION

  • Li-ion battery charging is mainly controlled by VCM.

  • VCM activates EV system by connecting charge connector, performing remote control, or using built-in timer to start charge to Li-ion battery. The following charge modes are available.

Methods of charging DescriptionDescription
Normal charge Immediate charge Refer to System Description.
Timer charge
Remote charge
Quick charge Refer to System Description.
Regeneration charge Refer to System Description.

CHARGING STATUS INDICATOR AND CHARGING SOUND SYSTEM

The charge connector connection status and charge receiving status can be checked with the charging status indicator lamp and the electronic sound from Nissan Ariya Vehicle Sound for Pedestrians (VSP).

  • For charging status indicator, Refer to Component Description.

  • For charging sound system, Refer to System Description.

Power Voltage Variable Control System Nissan Ariya 1st generation

System Description

DESCRIPTION

Power voltage variable control system reduce power consumption of high power battery by changing output of DC/DC converter to 13-15 V to according to status of use of electrical equipment and 12 V battery.

For details of control, Refer to System Description.

Remove Charge Connector Warning Nissan Ariya first Gen

System Description

USAGE

When READY operation is performed while charge connector is connected, this warns driver that charge connector is connected.

SymbolMessage

Can't start

Charging plug Connected

SYNCHRONIZATION WITH MASTER WARNING LAMP

Not existed

System diagram

SIGNAL PATH

  • When performing READY operation, READY signal is input from BCM to VCM.

  • When VCM detects connection status of normal or quick charge connector according to EVSE input signal from normal charge port and quick charger connection signal from quick charger and the normal or quick charge connector is connected, VCM transmits the remove charge connector warning signal to the combination meter.

  • When combination meter receives the remove charge connector warning signal, it displays the remove charge connector warning on Nissan Ariya vehicle information display.

When all of the following conditions are satisfied

  • Normal or quick charge connector is connected.

  • Power switch: OFF → ON

When any of the following conditions is satisfied

  • Normal or quick charge connector is disconnected (removed).

  • Power switch turns OFF.

TIMING CHART