Dtc/circuit Diagnosis
- B2f98-04 Sunshade Motor
- B2f98-95 Sunshade Motor
- Power Supply and Ground Circuit
- Sunroof Switch Assembly
- Communication Signal Circuit
- Lin Communication Circuit
B2f98-04 Sunshade Motor Nissan Ariya 2023
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms | DTC detection condition | |
|---|---|---|---|
| B2F98-04 | Sunshade motor | Diagnosis condition | When power switch ON or timer operates. |
| Signal (terminal) | — | ||
| Threshold | CPU in sunshade motor assembly detect internal malfunction | ||
| Diagnosis delay time | 1 second or less | ||
POSSIBLE CAUSE
Sunshade motor assembly
FAIL SAFE
Sunshade auto operation is forbidden
DTC CONFIRMATION PROCEDURE
PERFORM DTC CONFIRMATION PROCEDURE
Power switch ON.
Operate sunshade switch to any position.
Select “Self Diagnostic Result” mode of “BCM” using CONSULT.
Check DTC.
Is DTC detected?
YES>>Refer to Diagnosis Procedure.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
Diagnosis Procedure
REPLACE SUNSHADE MOTOR ASSEMBLY
Replace sunshade motor assembly. Refer to Removal & Installation.
>>INSPECTION END
B2f98-95 Sunshade Motor Nissan Ariya
DTC Description
DTC DETECTION LOGIC
| DTC No. | CONSULT screen terms | DTC detection condition | |
|---|---|---|---|
| B2F98-95 | Sunshade motor | Diagnosis condition | When power switch ON or timer operates. |
| Signal (terminal) | LIN communication signal | ||
| Threshold | BCM cannot LIN communication with sunshade motor assembly. | ||
| Diagnosis delay time | 2 second or less | ||
POSSIBLE CAUSE
LIN communication line
Sunshade motor assembly
BCM
FAIL SAFE
—
DTC CONFIRMATION PROCEDURE
CHECK DTC PRIORITY
When DTC "B2F98-95" is displayed together with DTC "B2F98-04", perform the diagnosis of DTC "B2F98-04" first.
Is applicable DTC detected?
YES>>Refer to DTC Description.
NO>>GO TO 2.
CHECK SELF-DIAG RESULT
With CONSULT
Power switch ON.
Perform “Self Diagnostic Result” mode of “BCM” using CONSULT.
Is DTC detected?
YES-1>>CRNT: Refer to Diagnosis Procedure.
YES-2>>PAST: GO TO 3.
NO-1>>To check malfunction symptom before repair: Refer to Intermittent Incident.
NO-2>>Confirmation after repair: INSPECTION END
CHECK OPERATION
Check that sunshade operate properly.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Refer to Diagnosis Procedure.
Diagnosis Procedure
CHECK DTC PRIORITY
When DTC "B2F98-95" is displayed together with DTC "B2F98-04", perform the diagnosis of DTC "B2F98-04" first.
Is applicable DTC detected?
YES>>Refer to DTC Description.
NO>>GO TO 2.
CHECK SUNSHADE MOTOR ASSEMBLY POWER SUPPLY AND GROUND CIRCUIT
Check sunshade motor assembly power supply and ground circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK LIN COMMUNICATION CIRCUIT
Check LIN communication circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>Replace sunshade motor assembly. Refer to Removal & Installation.
NO>>Repair or replace the malfunctioning parts.
Communication Signal Circuit Nissan Ariya 2023
Component Function Check
CHECK SUNSHADE FUNCTION
Operating sunshade switch and check sunshade OPEN/CLOSE operations.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Refer to Diagnosis Procedure.
Diagnosis Procedure
CHECK COMMUNICATION SIGNAL
Power switch ON.
Check signal between sunshade motor assembly harness connector and ground with oscilloscope.
(+) (–) Signal Sunshade motor assembly Connector Terminal R14 7 Ground 
Is the inspection result normal?
YES>>Replace sunshade motor assembly. Refer to Removal & Installation.
NO>>GO TO 2.
CHECK COMMUNICATION SIGNAL CIRCUIT
Power switch OFF.
Disconnect sunroof motor assembly connector and sunshade motor assembly connector.
Check continuity between sunroof motor assembly harness connector and sunshade motor assembly harness connector.
Sunroof motor assembly Sunshade motor assembly Continuity Connector Terminal Connector Terminal R12 7 R14 7 Existed Check continuity between sunshade motor assembly harness connector and ground.
Sunshade motor assembly — Continuity Connector Terminal R14 7 Ground Not existed
Is the inspection result normal?
YES>>Replace sunroof motor assembly. Refer to Removal & Installation.
NO>>Repair or replace harness.
Lin Communication Circuit Nissan Ariya 1st generation
Diagnosis Procedure
CHECK BCM OUTPUT SIGNAL
Power switch ON.
Check signal between BCM harness connector and ground using an oscilloscope.
(+) (−) Signal BCM Connector Terminal M8 24 Ground 
Is the inspection result normal?
YES>>GO TO 3.
NO>>GO TO 2.
CHECK LIN COMMUNICATION CIRCUIT
Power switch OFF, and then wait for 1 minutes with driver door open.
Disconnect following connectors.
BCM
Power window main switch
Front power window motor (driver side)
Front power window motor (passenger side)
Rear power window motor RH
Rear power window motor LH
Sunroof motor assembly
Sunshade motor assembly
Passenger door mirror control module
Connecting parts other than power window.
Check continuity between BCM harness connector and ground.
BCM — Continuity Connector Terminal M8 24 Ground Not existed
Is the inspection result normal?
YES>>Replace BCM. Refer to Removal and Installation.
NO>>Repair or replace harness.
CHECK LIN COMMUNICATION SIGNAL
Power switch OFF, and then wait for 1 minutes with driver door open.
Disconnect following connectors.
Power window main switch
Front power window motor (driver side)
Front power window motor (passenger side)
Rear power window motor RH
Rear power window motor LH
Sunroof motor assembly
Sunshade motor assembly
Passenger door mirror control module
Power switch ON.
Check signal between power window main switch harness connector, all power window motor harness connector and ground using an oscilloscope.
(+) (−) Signal Connector Terminal Sunroof motor assembly R12 9 Ground 
Sunshade motor assembly R14
Is the inspection result normal?
YES>>INSPECTION END
NO-1>>Sunroof motor assembly: GO TO 4.
NO-2>>Sunshade motor assembly: GO TO 5.
CHECK LIN COMMUNICATION CIRCUIT (SUNROOF MOTOR ASSEMBLY)
Power switch OFF.
Disconnect BCM connector.
Check continuity between BCM harness connector and sunroof motor assembly harness connector.
BCM Sunroof motor assembly Continuity Connector Terminal Connector Terminal M8 24 R12 9 Existed
Is the inspection result normal?
YES>>INSPECTION END
NO>>Repair or replace harness.
CHECK LIN COMMUNICATION CIRCUIT (SUNSHADE MOTOR ASSEMBLY)
Power switch OFF.
Disconnect BCM connector.
Check continuity between BCM harness connector and sunshade motor assembly harness connector.
BCM Sunshade motor assembly Continuity Connector Terminal Connector Terminal M8 24 R14 9 Existed
Is the inspection result normal?
YES>>INSPECTION END
NO>>Repair or replace harness.