4wd
In this manual: 4wd
~3min read
- Preparation. Preparation
- Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting
- Periodic Maintenance
- Removal and Installation
- Service Data and Specifications (sds). Service Data and Specifications (sds)
Preparation. Preparation Nissan Ariya 1st generation
Special Service Tool
Tool number Tool name | Description | |
|---|---|---|
KV40104000 Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) |
![]() |
Removing and Installing wheel hub lock nut. |
KV40107310 Boot band crimping tool |
![]() |
Installing boot band |
KV40107300 Boot band crimping tool |
![]() |
Installing boot band |
KV40107500 Drive shaft attachment |
![]() |
Removing drive shaft |
KV38107900 Protector a: 32 mm (1.26 in) dia. |
![]() |
Installing drive shaft |
Commercial Service Tool
| Tool name | Description | |
| Drive shaft puller | ![]() |
Removing drive shaft joint sub assembly |
| Sliding hammer | ![]() |
Removing drive shaft |
| Ball joint remover | ![]() |
Removing hub bolt |
Lubricant or/and Sealant
| Name | Description |
|---|---|
| NISSAN Genuine grease or equivalent |
|
Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting Nissan Ariya 2023
NVH Troubleshooting Chart
Use chart below to find the cause of the symptom. If necessary, repair or replace these parts.
| Possible cause and suspected parts | Symptom | Reference | |||||||
|---|---|---|---|---|---|---|---|---|---|
| DRIVE SHAFT | REAR AXLE | ||||||||
| Noise | Shake | Noise | Shake | Vibration | Shimmy | Judder | Poor quality ride or handling | ||
| Excessive joint angle | × | × | — | — | — | — | — | — | — |
| Joint sliding resistance | × | — | — | — | — | — | — | — | Inspection |
| Imbalance | — | × | — | — | — | — | — | — | — |
| Improper installation, looseness | — | — | × | × | × | × | × | × | Exploded View |
| Parts interference | — | — | × | × | × | × | — | × | — |
| Propeller shaft | × | × | × | × | × | — | — | — | — |
| Differential | × | — | × | — | — | — | — | — | NVH in RAX and RSU sections |
| REAR AXLE | × | × | × | × | × | × | × | × | Refer to Rear axle in this chart |
| REAR SUSPENSION | × | × | × | × | × | × | × | × | NVH Troubleshooting Chart |
| REAR AXLE | × | × | — | — | — | — | — | — | — |
| TIRE | × | × | × | × | × | × | × | × | NVH in WT section |
| ROAD WHEEL | × | × | × | × | — | × | × | × | NVH in WT section |
| DRIVE SHAFT | — | — | × | × | × | — | — | — | — |
| BRAKE | × | × | × | × | — | × | × | — | NVH in BR section |
| STEERING | × | × | × | × | × | × | × | — | NVH in ST section |
×: Applicable, —: Not applicable
Service Data and Specifications (sds). Service Data and Specifications (sds) Nissan Ariya 2026
Wheel Bearing
| Item | Standard |
|---|---|
| Axial end play | 0.05 mm (0.002 in) or less |
Drive Shaft
| Item | Standard | ||
|---|---|---|---|
| Grease quantity | Wheel side | 80– 100g (2.82 – 3.52 oz) | |
| Final drive side | 205– 225g (7.23 – 7.93 oz) | ||
| Boots installed length* | Wheel side | 131.6 mm (5.18 in) | |
| Final drive side | 175.9 mm (6.93 in) | ||
*: For measuring position, Refer to Disassembly & Assembly.
Was this page helpful?







