Description

Component Parts

In this manual: Description
How to Use This Manual — 1Precautions — 1Preparation — 1Vehicle Information — 1Basic Inspection — 1Preparation. Commercial Service Tools Or/and Repair Part — 1Description — 1Component Parts — 1System — 1Diagnosis System (vcm) — 1Ecu Diagnosis Information. Vcm — 1Ev Control System — 1Ev/hev (vcm) — 1Component Parts /circuit Diagnosis — 1Ev Control System — 1Periodic Maintenance. Ev System Warning Lamp — 1Removal and Installation. Vcm — 1Traction Motor System :: Front Traction Motor — 1Preparation — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Traction Motor System :: Rear Traction Motor — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Ev Battery System :: 66kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 2Service Data — 1Ev Battery System :: 91kwh Li-Ion Battery — 1Description — 4Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Disassembly and Assembly — 1Service Data — 2Preparation. Vehicle Charging System — 1Vehicle Charging System :: Description — 1Component Parts — 2System — 1Diagnosis System (on-Board Charger) — 1Diagnosis System (dc/dc Converter) — 1Ecu Diagnosis Information — 1Vehicle Charging System — 1Charger/pd Module (on-Board Charger) — 1Cplc (cplc) — 1Dcdc (dc/dc Converter) — 1Component Parts/circuit Diagnosis — 1Symptom Diagnosis — 1Evse Inspection — 1Periodic Maintenance — 1Removal and Installation — 1Disassembly and Assembly — 1Preparation. High Voltage Cooling System — 1Description — 1Symptom Diagnosis. Overheating Cause Analysis — 1Periodic Maintenance — 1Coolant — 1Removal and Installation — 1Radiator — 1Service Data — 1Removal and Installation. Accelerator Control System — 1Reduction Gear: Re1f62a — 1Removal and Installation — 1Transaxle & Transmission :: Electric Shift — 1Description — 3Basic Inspection — 2Dtc Diagnosis — 2Component Parts /circuit Diagnosis — 1Removal and Installation — 1Rear Final Drive: Rn1r62a — 1Removal and Installation — 1Preparation. Front Axle System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data. Front Drive Shaft — 12wd — 14wd — 1Periodic Maintenance — 1Removal and Installation — 1Preparation. Front Suspension System — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Symptom Diagnosis. Noise, Vibration and Harshness (nvh) Troubleshooting — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Road Wheels & Tires System — 1Description — 1System — 1Ecu Diagnosis Information. Bcm (body Control Module) — 1Tpms — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Road Wheels & Tires — 1Removal and Installation — 1Service Data — 1Preparation. Brake System — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Electrically-Driven Intelligent Brake Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1Service Data — 1Preparation. Parking Brake System — 1System Description — 1Component Parts — 1System — 1Ecu Diagnosis Information. Abs Actuator and Electric Unit (control Unit) — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Brake Control System :: With Vdc — 1System Description — 3Basic Inspection — 2Dtc/circuit Diagnosis — 1Symptom Diagnosis — 2Removal and Installation — 1Brake Control System :: Automatic Brake Hold — 1System Description — 3Component Parts /circuit Diagnosis — 1Removal and Installation — 1Brake Control System :: E-Step — 1System Description — 3Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Symptom Diagnosis — 1Rear Automatic Braking — 1System Description — 1Basic Inspection — 1Preparation. Steering System — 1System Description — 1Component Parts — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance. Steering Wheel — 1Removal and Installation — 1Service Data — 1System Description — 1Component Parts — 1Steering Control System — 1Ecu Diagnosis Information. Power Steering Control Module — 1Dtc/circuit Diagnosis — 1Component Parts /circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation. Power Steering Control Module — 1System Description — 1Removal and Installation — 1System Description — 1System — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Component Parts — 1Basic Inspection — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information. Air Bag Diagnosis Sensor Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1System Description. Description. Ventilation System — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1Basic Inspection — 1Symptom Diagnosis — 1Removal and Installation — 1Electric Compressor — 1Cooler Pipe and Hose — 1A/c Unit Assembly Cover — 1A/c Unit Assembly — 1Heater & Air Conditioning Control System :: Automatic Air Conditioning — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 2Dtc Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 2Preparation. Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Preparation. Instrument Panel — 1Component Parts — 1System — 1Ecu Diagnosis Information. Flexible Center Storage Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information. Driver Lumbar Support Control Module — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1System — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Manual Function Does Not Operate — 1Memory Function Does Not Operate — 1Removal and Installation — 1Preparation. Preparation — 1System Description — 1System (intelligent Key System) — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1U2141-87 Can Comm Circuit — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Automatic Back Door Operation Does Not Operate — 1Back Door Does Not Open — 1Door Does Not Lock/unlock with Door Lock and Unlock Switch — 1Removal and Installation — 1Hood — 1Radiator Core Support — 1Charge Port Lid — 1Front Fender — 1Front Door — 1Rear Door — 1Back Door — 1Hood Lock — 1Front Door Lock — 1Rear Door Lock — 1Back Door Lock — 1Outside Key Antenna — 1System Description — 1System — 1Ecu Diagnosis Information. Inverter (front), Inverter (rear), Bcm, Intelligent Key Unit — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Preparation — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Front Passenger Side Power Window Does Not Operate — 1Rear Lh Side Power Window Does Not Operate — 1Rear Rh Side Power Window Does Not Operate — 1Removal and Installation. Power Window Main Switch — 1Preparation. Preparation — 1System Description — 1Ecu Diagnosis Information — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Sunroof Switch Assembly — 1Symptom Diagnosis — 1Auto Operation Does Not Operate — 1Removal and Installation — 1Preparation — 1Description — 1Symptom Diagnosis. Squeak and Rattle Trouble Diagnoses — 1Removal and Installation — 1Service Information — 6Repair Information — 1Precaution — 1Preparation — 1Removal and Installation — 1Service Data — 1Preparation. Preparation — 1Component Parts — 1System — 1Ecu Diagnosis Information — 1Wiring Diagram. Door Mirror — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Power Supply and Ground Circuit — 1Symptom Diagnosis — 1Removal and Installation — 1Exterior Lighting System :: Led Headlamp — 1System Description — 3Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Periodic Maintenance — 1Removal and Installation — 1System Description — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm, Intelligent Key Unit — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis. Interior Lighting System Symptom — 1Removal and Installation — 1Service Data. Bulb Specifications — 1System Description — 1System — 1Ecu Diagnosis Information. Bcm, Ipdm E/r — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1System Description — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection. Diagnosis and Repair Work Flow — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Preparation. Preparation — 1Removal and Installation. Horn — 1Preparation. Commercial Service Tools Or/and Repair Part — 1System Description — 1Component Parts — 1Ecu Diagnosis Information. Approaching Vehicle Sound for Pedestrians (vsp) Control Unit — 1Approaching Vehicle Sound for Pedestrians (vsp) — 1Vsp [approaching Vehicle Sound for Pedestrians (vsp) Control Unit] — 1Approaching Vehicle Sound for Pedestrians (vsp) System — 1Removal and Installation — 1Removal and Installation — 1Wireless Charger — 1System Description — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Removal and Installation — 1Component Parts — 1System — 1Diagnosis System (bcm) — 1Ecu Diagnosis Information. Bcm — 1Basic Inspection — 1Dtc/circuit Diagnosis — 1Symptom Diagnosis — 1Removal and Installation — 1Can Fundamental — 1Description — 1Trouble Diagnosis — 1Can (controller Area Network) — 1Description — 1
9steps
~54min
3/5difficulty
Done 0 of 9
  • 2wd
  • Li-Ion Battery
  • Module
  • Li-Ion Battery Controller & Cell Controller
  • Battery Junction Box
  • Battery Current Sensor
  • Battery Pack Pressure Sensor
  • Battery Pack Water Temperature Sensor
  • Electric Water Pump 2 (li-Ion Battery)
  • Battery Coolant Heater
  • Battery Coolant Chiller
  • Expansion Valve (battery Chiller)
  • Refrigerant Temperature Sensor (battery Chiller)
  • Battery Ventilation Valve
  • Service Plug
  • High Voltage Warning Label

2wd Nissan Ariya 2023

Component Parts Location

Vehicle

Heat pump control unit A/C auto amp. Charge port
Inverter (front) VCM Li-ion battery
Service plug

Battery pack

Li-ion battery controller (LBC) Service plug Cell controller No.1
Cell controller No.2 Cell controller No.3 Cell controller No.4
Cell controller No.5 Cell controller No.6 Cell controller No.7
Cell controller No.8 Battery pack pressure sensor 1 Junction box
Battery pack pressure sensor 2 Battery pack water temperature sensor
Front side of battery pack

Module

Module No.1 Module No.2 Module No.3
Module No.4 Module No.5 Module No.6
Module No.7 Module No.8 Module No.9
Module No.10 Module No.11 Module No.12

Battery pack temperature control

Reservoir tank (Battery cooling) Expansion valve (Battery chiller) Refrigerant temperature sensor (Battery chiller inlet)
Refrigerant temperature sensor (Battery chiller outlet) Battery coolant chiller Electric water pump 2 (Li-ion battery)
Li-ion battery

Battery coolant heater

(Battery PTC heater)
To refrigerant cycle

Li-Ion Battery Nissan Ariya 2026

Component Description

FUNCTIONS WITHIN THE SYSTEM

  • Li-ion battery is supplied as high-voltage direct current to the high-voltage systems.

  • Li-ion battery is controlled by Li-ion battery controller (LBC) and transmits a state of Li-ion battery to VCM. VCM performs Nissan Ariya vehicle control depending on Li-ion battery state.

  • Li-ion battery accumulates electricity from the on-Nissan Ariya vehicle charger and the regenerative electricity by the traction motor. And supplies electricity to traction motor for the driving.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

  • The battery pack is equipped with Liion battery controller, cell controller, battery junction box and service plug.

  • In battery pack, 12 modules are connected in series and produces high voltage.

  • For each part of the Li-ion battery pack, refer to the following.

    Parts nameReference
    Module Refer to Component Description.
    Li-ion battery controller (LBC) & cell controller Refer to Component Description.
    Battery junction box Refer to Component Description.
    Battery current sensor Refer to Component Description.
    Battery pack pressure sensor Refer to Component Description.
    Battery pack water temperature sensor Refer to Component Description.
    Battery ventilation valve Refer to Component Description.

PARTS LOCATION

Li-ion battery with flat construction is placed under floor.

Refer to Component Parts Location.

Module Nissan Ariya 2026

Component Description

FUNCTIONS WITHIN THE SYSTEM

The Li-ion battery has 12 modules placed in series and the module supplies high voltage to a vehicle.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

MODULE

The module that a lot of box-shaped cells are constituted is applied.

Each module has built-in temperature sensor. And the module inputs a module temperature signal to each cell controller.

StructureNumber of cellsModule No.Capacity (Ah)Minimum voltage (V)Maximum voltage (V)Shape

2P9S

(2 Parallel 9 Series)
18 cells

MD1, MD2, MD3, MD4 MD9, MD10, MD11, MD12

(Front side)
187.2 25.2 37.66

2P6S

(2 Parallel 6 Series)
12 cells

MD5, MD6, MD7, MD8

(Rear side)
187.2 16.8 25.1

A module consists of parallel-connected cells placed in series.

Image

CELL

  • A box-shaped cell was adopted.

  • The box-shaped cell allows a compact design.

PARTS LOCATION

Modules are installed in battery pack.

Refer to Component Parts Location.

Li-Ion Battery Controller & Cell Controller Nissan Ariya: FE0

Component Description

FUNCTIONS WITHIN THE SYSTEM

Li-ion Battery Controller (LBC)

  • Li-ion battery controller (LBC) is the core of battery control.

  • LBC detects the battery current, the battery coolant temperature, and the voltage of each cell to judge state of charge (SOC). it also calculates possible input/output values, meter indication values, and chargeable values.

  • LBC transmits the battery status signals to VCM (Nissan Ariya Vehicle control module) via CAN communication. VCM controls the vehicle according to the battery status.

Cell Controller

8 cell controllers are installed in a battery pack. And each module temperature and each cell voltage are detected, and it transmits a message to LBC in a communication line.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

Li-ion Battery Controller (LBC)

Main Role

  1. Li-ion battery state check

    • State of charge (SOC)

    • Possible output value

    • Possible input value

    • Battery coolant temperature

  2. Deviation state grasp of each cell SOC

  3. Prevention of overvoltage

  4. Prevention of overheat

  5. Detection of decrease in insulation resistance of high-voltage circuit

  6. Detection of connection of each high voltage harness connector and service plug

Twin CPU Control

Two CPU's (Main CPU and Sub CPU) were integrated in LBC to adapt ISO26262 that is intended to be applied to safety-related systems.

  • The information about safety such as the cell voltage, module temperature, current value and etc is diagnosed by each CPU in parallel.

  • The insulation resistance of the Nissan Ariya vehicle high voltage circuit and the interlock condition of the high voltage connector such as the service plug are detected.

  • Each CPU communicates with CONSULT directly and can be diagnosed.

    CPU in LBC System name on CONSULT
    Main CPU HIGH VOLTAGE BATTERY
    Sub CPU HIGH VOLTAGE BATTERY 2

For details of the CONSULT function, Refer to Diagnosis Description.

Cell Controller

Main Role

  1. State grasp of each cell voltage

  2. State grasp of each module temperature

  3. Adequacy of the SOC deviation

INDIVIDUAL OPERATION

Cell controller measures each cell voltage by integrated ASIC and then performs cell capacity adjustment.

Module No.Cell controller No.Cell No.Data monitor / FFD display*
12 8 96 95
95 94
94 93
93 92
92 91
91 90
90 89
89 88
88 87
11 87 86
86 85
85 84
7/8 common 84 83
7 83 82
82 81
81 80
80 79
79 78
10 78 77
77 76
76 75
75 74
74 73
73 72
6/7 common 72 71
6 71 70
70 69
9 69 68
68 67
67 66
66 65
65 64
64 63
63 62
62 61
61 60
8 5/6 common 60 59
5 59 58
58 57
57 56
56 55
55 54
7 54 53
53 52
52 51
51 50
50 49
49 48
6 4/ 5 common 48 47
4 47 46
46 45
45 44
44 43
43 42
42 41
5 41 40
40 39
39 38
38 37
37 36
3/4 common 36 35
4 3 35 34
34 33
33 32
32 31
31 30
30 29
29 28
28 27
27 26
3 26 25
25 24
2/3 common 24 23
2 23 22
22 21
21 20
20 19
19 18
18 17
2 17 16
16 15
15 14
14 13
13 12
1/2 common 12 11
1 11 10
10 9
9 8
1 8 7
7 6
6 5
5 4
4 3
3 2
2 1
1 0
GND -

*:In data monitor /FFD, the cell number is displayed with 0-95 in the item indicating.

PARTS LOCATION

  • Li-ion battery controller (LBC) and each cell controller are included in the battery pack and installed.

    Cell controller No.1 Cell controller No.2 Cell controller No.3
    Cell controller No.4 Cell controller No.5 Cell controller No.6
    Cell controller No.7 Cell controller No.8 Li-ion battery controller (LBC)
  • In the battery pack location, Refer to Component Parts Location.

Battery Junction Box Nissan Ariya 2023

Component Description

FUNCTIONS WITHIN THE SYSTEM

The battery junction box has each relay built-in and controls the direct current with Li-ion battery and each high voltage parts and the quick charger.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

No.Parts nameParts role
Pre-charge relay To protect the high voltage circuit from a high current immediately after power switch ON, it is connected in series with a register (resistance).
System main relay 1 Supplies / cuts off the high voltage (+) side circuit between Li-ion battery and high voltage circuit.
Pre-charge register Drops high voltage with pre-charge relay immediately after power switch ON.
High voltage fuse (Quick charge)

High voltage fuse for quick charge circuit

Capacity: 500A
Quick charge relay 1 Supplies / cuts off the high voltage (+) side circuit between Li-ion battery and quick charge circuit.
High voltage fuse (Main)

High voltage fuse for main circuit

Capacity: 400A
Quick charge relay controller Controls the quick charge relay depending on F/S CHG relay signal and high voltage power supply from a quick charger.
Noise filter Reduces a magnetic field noise at the time of the high voltage electricity by a ferrite core.
PTC fuse

High voltage fuse for battery heater (PTC) circuit

Capacity: 40A
Quick charge relay 2 Supplies / cuts off the high voltage (-) side circuit between Li-ion battery and quick charge circuit.
Battery current sensor

Measures a charge/discharge electric current of the Li-ion battery and transmits a current signal to LBC via CAN communication.

For the details, Refer to Component Description.
System main relay 2 Supplies / cuts off the high voltage (-) side circuit between Li-ion battery and high voltage circuit.

INDIVIDUAL OPERATION

  • The system main relay is installed on the positive side (system main relay 1) and the negative side (system main relay 2) and is controlled by VCM. System main relay supplies the direct current electricity from module to high-voltage system of the Nissan Ariya vehicle. And then it supplies the direct current electricity to module during the motor regeneration or the Nissan Ariya vehicle charge.

  • Pre-charge relay is connected in series with a register (resistance) to protect the high voltage circuit from a high current immediately after power switch ON.

  • The quick charge relay is installed on the positive side (quick charge relay 1) and the negative side (quick charge relay 2) and is controlled by the VCM and the quick charge relay controller. quick charge relay supplies the direct current electricity from quick charger (quick charge port) to Li-ion battery.

Pre-charge relay System main relay 1 Pre-charge register
High voltage fuse (Quick charge) Quick charge relay 1 High voltage fuse (Main)
Quick charge relay controller Noise filter PTC fuse
Quick charge relay 2 Battery current sensor System main relay 2
P1 High voltage (+) P2 Li-ion battery (+) P3 High voltage (-)
P4 Li-ion battery (-) P5 Quick charge (+) P6 Quick charge (-)
P7 High voltage (+) P8 High voltage (-) P11 Battery heater (PTC) (+)
P12 Battery heater (PTC) (-)
S1 System main relay 1 (+) S2 System main relay 1 (-) S3 System main relay 2 (+)
S4 System main relay 2 (-) S6 Quick charge relay 1 (-) S8 Quick charge relay 2 (-)
S9 Pre-charge relay (+) S10 Pre-charge relay (-) S11 Battery current sensor power supply
S12 Battery current sensor ground S13 Battery current sensor CAN-L S14 Battery current sensor CAN-H
S15 Pre-charge relay power supply S17 F/S CHG relay signal S18 Quick charge relay controller power supply
S20 Quick charge relay controller ground S21 Quick charge relay status signal S22 Gound

PARTS LOCATION

The battery junction box is installed on the battery pack.

Refer to Component Parts Location.

Battery Current Sensor Nissan Ariya first Gen

Component Description

FUNCTIONS WITHIN THE SYSTEM

  • The battery current sensor is included in the battery junction box.

  • This sensor measures charge/discharge current sent to Li-ion battery and transmits a current signal to Li-ion battery controller (LBC).

  • LBC measures remaining battery level according to charge/discharge current and sends the data to VCM.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

The sensor measures charge/discharge current in Li-ion battery.

INDIVIDUAL OPERATION

The battery current sensor transmits a detected current value to LBC via the data communication of the CAN communication method.

PARTS LOCATION

The battery current sensor is installed on the battery junction box.

Refer to Component Description.

Battery Pack Pressure Sensor Nissan Ariya 2026

Component Description

FUNCTIONS WITHIN THE SYSTEM

The battery pack pressure sensor is installed two sensor in a battery pack and it detects the pressure in the battery pack.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

The pressure signal detected by the battery pack pressure sensor is transmitted to VCM, and VCM judges the pressure in the battery pack.

PARTS LOCATION

The battery pack pressure sensor is installed on both sides of junction box of the front part in the battery pack.

Refer to Component Parts Location.

Battery Pack Water Temperature Sensor Nissan Ariya 1st generation

Component Description

FUNCTIONS WITHIN THE SYSTEM

The battery pack water temperature sensor is installed to the water line of the battery pack floor and detects battery coolant temperature.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

The detected water temperature signal by the battery pack water temperature sensor is transmitted to LBC, and LBC detects the water temperature in the battery pack.

LBC transmits a state of the water temperature to VCM via CAN communication.

PARTS LOCATION

The battery pack water temperature sensor is installed on left side of junction box of the front part in the battery pack.

Refer to Component Parts Location.

Electric Water Pump 2 (li-Ion Battery) Nissan Ariya SUV

Component Description

FUNCTIONS WITHIN THE SYSTEM

Electric water pump 2 (Li-ion battery) circulates battery coolant to flow through the battery pack.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

  • Electric water pump 2 (Li-ion battery) is controlled by VCM and VCM controls a water flow of the coolant.

  • Electric water pump 2 (Li-ion battery) has an interface circuit and it transmits a malfunction signal to VCM if abnormal condition is detected.

PARTS LOCATION

Electric water pump 2 (Li-ion battery) is installed in the motor room right side.

Refer to Component Parts Location.

Battery Coolant Heater Nissan Ariya 2023

Component Description

FUNCTIONS WITHIN THE SYSTEM

Battery coolant heater (Battery PTC heater) is installed on the rear end of battery pack and it warms the battery coolant.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

The battery coolant heater has PTC heater. And it warms battery coolant by high voltage supplied from a battery pack.

INDIVIDUAL OPERATION

The battery coolant heater receives the control signal via LIN communication from A/C auto amp. and controls PTC heater. In addition, the working conditions signal of the PTC heater is transmitted to A/C auto amp.

PARTS LOCATION

Battery coolant heater is installed on the rear end of battery pack.

Refer to Component Parts Location.

Battery Coolant Chiller Nissan Ariya: FE0

Component Description

FUNCTIONS WITHIN THE SYSTEM

Battery coolant chiller is installed on the motor room left side and it cools off battery coolant.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

Battery coolant chiller functions as an evaporator. And battery courant is cooled off.

INDIVIDUAL OPERATION

The refrigerant is atomized from expansion valve to battery coolant chiller and is vaporized. Thereby, battery coolant chiller cools the battery coolant.

PARTS LOCATION

Battery coolant chiller is installed on the motor room left side rear.

Refer to Component Parts Location.

Expansion Valve (battery Chiller) Nissan Ariya 2026

Component Description

FUNCTIONS WITHIN THE SYSTEM

The expansion valve (battery chiller) is installed on the motor room left side and sprays the refrigerant to battery coolant chiller.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

The high pressure refrigerant compressed with a compressor is jetted by expansion valve. Battery coolant chiller is cooled by expanded refrigerant.

INDIVIDUAL OPERATION

The expansion valve (battery chiller) is controlled by HPCU (heat pump ECU) and sprays a refrigerant to the battery coolant chiller.

PARTS LOCATION

The expansion valve (Battery chiller) is installed on the motor room left side rear.

Refer to Component Parts Location.

Refrigerant Temperature Sensor (battery Chiller) Nissan Ariya SUV

Component Description

FUNCTIONS WITHIN THE SYSTEM

Refrigerant temperature sensors are installed on the refrigerant pipe. And it detects the temperature of a refrigerant inlet/outlet of the battery coolant chiller.

: Refrigerant temperature sensor (Battery chiller inlet)
: Refrigerant temperature sensor (Battery chiller outlet)

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

Refrigerant temperature sensor detects the refrigerant temperature of inlet side /outlet side of the battery coolant chiller and transmits each side refrigerant temperature signal to HPCU (heat pump ECU).

PARTS LOCATION

Refrigerant temperature sensors are installed at the refrigerant pipe on the motor room left side rear.

Refer to Component Parts Location.

Battery Ventilation Valve Nissan Ariya SUV

Component Description

FUNCTIONS WITHIN THE SYSTEM

Two battery ventilation valves are installed on the battery pack. When the pressure is the specified pressure, it releases the pressure in the battery pack.

INDIVIDUAL OPERATION

When the pressure is the specified pressure, battery ventilation valve releases the pressure mechanically.

PARTS LOCATION

The battery ventilation valves are installed to both sides of the battery pack rear.

Refer to Component Parts Location.

Service Plug Nissan Ariya 1st generation

Component Description

FUNCTIONS WITHIN THE SYSTEM

The service plug is included in the Li-ion battery to securely disconnect the high voltage circuit during high voltage part inspection and maintenance.

INDIVIDUAL FUNCTIONS WITHIN THE SYSTEM

Service plug is attached between module No. 8 and module No.9 and it is able to cut off the high voltage circuit physically.

PARTS LOCATION

The plug can be removed when the service plug cover on the rear seat step is removed.

Refer to Component Parts Location.

High Voltage Warning Label Nissan Ariya 2023

Component Description

  • High voltage warning label is affixed to each of the following component parts.

    • Li-ion battery and high voltage harness (rear side)

      The Li-ion battery warning label is affixed on the upper of Li-ion battery and the high voltage harness (rear side) warning label is affixed on the end of Li-ion battery.

      : Nissan Ariya Vehicle front
      : Direction of the label
    • High voltage harness (front side)

      The high voltage harness (front side) warning label is affixed to the body panel near the high voltage harness connector.

      : Nissan Ariya Vehicle front
      : Direction of the label
    • Service plug

      Service plug warning label is affixed to the inspection hole cover.

      : Nissan Ariya Vehicle front
      : Direction of the label

      In addition, service plug removing caution label is affixed to the inspection hole cover behind.

      Refer to HIGH VOLTAGE PRECAUTIONS : Precautions.

      : Nissan Ariya Vehicle front
      : Direction of the label
  • At times such as when a part was replaced, or when a label had become peeled, be sure to apply the new product label in the same position and facing in the same direction.

    Some labels include some letters, such as “LS” or “K”, applied to each size in the lower right corner. Check if the replacement label has the letters in the lower right corner. If yes, select the replacement label with the letters from the label kit. If not, select the replacement label from the kit with same language as the original label. Always be sure to replace the label with the exact same type of label.