Back-up Light Assembly
- Removal
- Disassembly
- Inspection
- Reassembly
- Installation
Removal
REMOVAL
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
REAR BUMPER ASSEMBLY |
- |
- |
- |
- |
2 |
BACK-UP LIGHT ASSEMBLY |
81680 |
- |
- |
- |
PROCEDURE
1. REMOVE REAR BUMPER ASSEMBLY
Click here ![]()
2. REMOVE BACK-UP LIGHT ASSEMBLY

Disassembly
DISASSEMBLY
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
BACK-UP LIGHT LED |
8158AG |
- |
- |
|
2 |
BACK-UP LIGHT BODY GASKET |
81684 |
- |
- |
- |
*1 |
BACK-UP LIGHT LENS AND BODY |
- |
- |
PROCEDURE
1. REMOVE BACK-UP LIGHT LED

![]() |
Remove in this Direction |
- |
- |
(1) Using a T20H "TORX" driver, remove the "TORX" screw.
(2) Remove the back-up light LED as shown in the illustration.
2. REMOVE BACK-UP LIGHT BODY GASKET

Inspection
INSPECTION
PROCEDURE
1. INSPECT BACK-UP LIGHT ASSEMBLY LH
(a) Apply auxiliary battery voltage to the back-up light assembly LH and check that the light comes on. OK:
If the result is not as specified, replace the back-up light assembly LH. |
|
2. INSPECT BACK-UP LIGHT ASSEMBLY RH
(a) Apply auxiliary battery voltage to the back-up light assembly RH and check that the light comes on. OK:
If the result is not as specified, replace the back-up light assembly RH. |
|
Reassembly
REASSEMBLY
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
BACK-UP LIGHT BODY GASKET |
81684 |
- |
- |
- |
2 |
BACK-UP LIGHT LED |
8158AG |
- |
- |
- |
*1 |
BACK-UP LIGHT LENS AND BODY |
- |
- |
PROCEDURE
1. INSTALL BACK-UP LIGHT BODY GASKET
2. INSTALL BACK-UP LIGHT LED
Installation
INSTALLATION
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
BACK-UP LIGHT ASSEMBLY |
81680 |
- |
- |
- |
2 |
REAR BUMPER ASSEMBLY |
- |
- |
- |
- |
PROCEDURE
1. INSTALL BACK-UP LIGHT ASSEMBLY
2. INSTALL REAR BUMPER ASSEMBLY
Click here ![]()















