Front Console Box
- Removal
- Disassembly
- Reassembly
- Installation
Removal
REMOVAL
NOTICE:
- When disconnecting a wire harness of any component connected to the supply power of the integrated capacitor (integration control supply) or when removing the integrated capacitor (integration control supply), make sure to wait 5 minutes or more after turning the ignition switch off for self-diagnosis to complete and the voltage of the integrated capacitor (integration control supply) to discharge.
- After completing a procedure, change the shift position to all positions and check the following items:
- The shift position indicator illuminates in accordance with the current position
- The Toyota Prius vehicle does not move when in shift state P (parking brake is not engaged)
- The vehicle does not drive when in shift state N
- The vehicle drives when in shift state D or R

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
SECURE Toyota Prius Vehicle |
- |
- |
- |
|
2 |
FRONT DOOR SCUFF PLATE LH |
67914 |
- |
- |
- |
3 |
COWL SIDE TRIM BOARD LH |
62112 |
- |
- |
- |
4 |
NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
55606 |
- |
- |
- |
5 |
LOWER CENTER INSTRUMENT PANEL FINISH PANEL |
55434B |
- |
- |
- |
6 |
SHIFT LEVER KNOB SUB-ASSEMBLY |
33504F |
- |
- |
- |
7 |
UPPER CONSOLE PANEL SUB-ASSEMBLY |
58804A |
- |
- |
- |
8 |
TRANSMISSION FLOOR SHIFT ASSEMBLY |
33550 |
- |
- |
|

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
9 |
FRONT NO. 1 CONSOLE BOX INSERT |
58816D |
- |
- |
- |
10 |
FRONT NO. 2 CONSOLE BOX INSERT |
58817A |
- |
- |
- |
11 |
CONSOLE REAR END PANEL SUB-ASSEMBLY |
58903A |
- |
- |
- |
12 |
CONSOLE BOX CARPET |
58815A |
- |
- |
- |
13 |
REAR CONSOLE BOX ASSEMBLY |
58910C |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
14 |
FRONT CONSOLE BOX COVER |
58818A |
- |
- |
|
15 |
STEREO JACK ADAPTER ASSEMBLY |
86190E |
- |
- |
- |
16 |
USB CHARGER SOCKET |
85532 |
- |
- |
|
17 |
NO. 1 POWER OUTLET SOCKET ASSEMBLY |
85530 |
- |
- |
|
18 |
NO. 1 POWER OUTLET SOCKET COVER |
85535B |
- |
- |
|
19 |
CONSOLE BOX POCKET |
- |
- |
- |
- |
20 |
CONSOLE CUP HOLDER BOX SUB-ASSEMBLY |
58803C |
- |
- |
- |
PROCEDURE
1. SECURE Toyota Prius Vehicle
![]() |
Click here |
2. REMOVE FRONT DOOR SCUFF PLATE LH
Click here ![]()
3. REMOVE COWL SIDE TRIM BOARD LH
Click here ![]()
4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

*A |
w/ Illumination |
- |
- |
![]() |
Remove in this Direction |
- |
- |
5. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL

![]() |
Place Hand Here |
![]() |
Remove in this Direction |
(b) w/ Knee Airbag:

![]() |
Remove in this Direction (1) |
![]() |
Remove in this Direction (2) |
6. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Click here ![]()
7. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY

*A |
w/ Wireless Charger |
- |
- |
![]() |
Place Hand Here |
![]() |
Remove in this Direction |
8. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY
![]() |
Click here |
9. REMOVE FRONT NO. 1 CONSOLE BOX INSERT

![]() |
Remove in this Direction |
- |
- |
10. REMOVE FRONT NO. 2 CONSOLE BOX INSERT

![]() |
Remove in this Direction |
- |
- |
11. REMOVE CONSOLE REAR END PANEL SUB-ASSEMBLY

*A |
w/ Seat Heater System |
*B |
w/ Power Outlet Socket |
![]() |
Place Hand Here |
![]() |
Remove in this Direction |
12. REMOVE CONSOLE BOX CARPET

13. REMOVE REAR CONSOLE BOX ASSEMBLY

![]() |
Remove in this Direction |
- |
- |
14. REMOVE FRONT CONSOLE BOX COVER
HINT:
Perform this procedure only when replacement of the front console box cover is necessary.

(1) Apply protective tape to the area shown in the illustration.

![]() |
Remove in this Direction |
- |
- |
(1) Using a moulding remover, disengage the 6 clips as shown in the illustration to remove the front console box cover.
(2) Disconnect each connector.
15. REMOVE STEREO JACK ADAPTER ASSEMBLY
HINT:
Perform this procedure only when replacement of the front console box cover is necessary.
Click here ![]()
16. REMOVE USB CHARGER SOCKET
HINT:
Perform this procedure only when replacement of the front console box cover is necessary.
![]() |
Click here |
17. REMOVE NO. 1 POWER OUTLET SOCKET ASSEMBLY
HINT:
Perform this procedure only when replacement of the front console box cover is necessary.
![]() |
Click here |
18. REMOVE NO. 1 POWER OUTLET SOCKET COVER
HINT:
Perform this procedure only when replacement of the front console box cover is necessary.
![]() |
Click here |
19. REMOVE CONSOLE BOX POCKET
HINT:
Perform this procedure only when replacement of the console box pocket is necessary.

20. REMOVE CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
HINT:
Perform this procedure only when replacement of the console cup holder box sub-assembly is necessary.

Disassembly
DISASSEMBLY
COMPONENTS (DISASSEMBLY)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
UPPER CONSOLE DOOR SUB-ASSEMBLY |
58906 |
- |
- |
|
PROCEDURE
1. REMOVE UPPER CONSOLE DOOR SUB-ASSEMBLY

![]() |
Remove in this Direction |
- |
- |
(1) Using a moulding remover, disengage the 9 clips as shown in the illustration to remove the upper console door sub-assembly.
Reassembly
REASSEMBLY
COMPONENTS (REASSEMBLY)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
UPPER CONSOLE DOOR SUB-ASSEMBLY |
58906 |
- |
- |
- |
PROCEDURE
1. INSTALL UPPER CONSOLE DOOR SUB-ASSEMBLY
Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
CONSOLE CUP HOLDER BOX SUB-ASSEMBLY |
58803C |
- |
- |
- |
2 |
CONSOLE BOX POCKET |
- |
- |
- |
- |
3 |
NO. 1 POWER OUTLET SOCKET COVER |
85535B |
- |
- |
- |
4 |
NO. 1 POWER OUTLET SOCKET ASSEMBLY |
85530 |
- |
- |
- |
5 |
USB CHARGER SOCKET |
85532 |
- |
- |
- |
6 |
STEREO JACK ADAPTER ASSEMBLY |
86190E |
- |
- |
- |
7 |
FRONT CONSOLE BOX COVER |
58818A |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
8 |
REAR CONSOLE BOX ASSEMBLY |
58910C |
- |
- |
- |
9 |
CONSOLE BOX CARPET |
58815A |
- |
- |
- |
10 |
CONSOLE REAR END PANEL SUB-ASSEMBLY |
58903A |
- |
- |
- |
11 |
FRONT NO. 2 CONSOLE BOX INSERT |
58817A |
- |
- |
- |
12 |
FRONT NO. 1 CONSOLE BOX INSERT |
58816D |
- |
- |
- |
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
13 |
TRANSMISSION FLOOR SHIFT ASSEMBLY |
33550 |
- |
- |
- |
14 |
UPPER CONSOLE PANEL SUB-ASSEMBLY |
58804A |
- |
- |
- |
15 |
SHIFT LEVER KNOB SUB-ASSEMBLY |
33504F |
- |
- |
|
16 |
LOWER CENTER INSTRUMENT PANEL FINISH PANEL |
55434B |
- |
- |
- |
17 |
NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
55606 |
- |
- |
- |
18 |
COWL SIDE TRIM BOARD LH |
62112 |
- |
- |
- |
19 |
FRONT DOOR SCUFF PLATE LH |
67914 |
- |
- |
- |
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |
PROCEDURE
1. INSTALL CONSOLE CUP HOLDER BOX SUB-ASSEMBLY
2. INSTALL CONSOLE BOX POCKET
3. INSTALL NO. 1 POWER OUTLET SOCKET COVER
4. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
5. INSTALL USB CHARGER SOCKET
6. INSTALL STEREO JACK ADAPTER ASSEMBLY
7. INSTALL FRONT CONSOLE BOX COVER
8. INSTALL REAR CONSOLE BOX ASSEMBLY
Torque:
13 N·m {133 kgf·cm, 10 ft·lbf}
9. INSTALL CONSOLE BOX CARPET
10. INSTALL CONSOLE REAR END PANEL SUB-ASSEMBLY
11. INSTALL FRONT NO. 2 CONSOLE BOX INSERT
12. INSTALL FRONT NO. 1 CONSOLE BOX INSERT
13. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY
Click here ![]()
14. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY
15. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
![]() |
Click here |
16. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
17. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
18. INSTALL COWL SIDE TRIM BOARD LH
19. INSTALL FRONT DOOR SCUFF PLATE LH





















































