Stereo Component Amplifier
- Removal
- Removal
- Installation
Removal
REMOVAL
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during stereo component amplifier assembly removal/installation are shown below.
CAUTION:
Be sure to read Precaution thoroughly before servicing.

Click here ![]()
NOTICE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here

- To prevent the key from being locked in the Toyota Prius vehicle, make sure to enter e-latch inspection mode and enable the manual release handle before disconnecting the cable from the negative (-) auxiliary battery terminal.
Click here

HINT:
- When the cable is disconnected / reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used. Learning completes when Toyota Prius vehicle is driven
Learning completes when vehicle is operated normallyEffect/Inoperative Function When Necessary Procedures are not Performed
Necessary Procedures
Link
Front Camera System
Drive the Toyota Prius vehicle straight ahead at 35 km/h or more for 5 seconds or more.

Effect/Inoperative Function When Necessary Procedures are not Performed
Necessary Procedures
Link
*1: w/o Power Back Door System *2: w/ Power Back Door System
Power Door Lock Control System*1
- Back door opener
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.

Power Back Door System*2
Reset back door close position

Air Conditioning System
After the ignition switch is turned to ON, the servo motor standard position is recognized.
-

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FRONT SEAT ASSEMBLY |
- |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
2 |
AUDIO AMPLIFIER COVER |
86183D |
- |
- |
- |
3 |
STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET |
- |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
4 |
NO. 1 AMPLIFIER BRACKET |
86285 |
- |
- |
- |
5 |
NO. 2 AMPLIFIER BRACKET |
86285F |
- |
- |
- |
*1 |
STEREO COMPONENT AMPLIFIER ASSEMBLY |
- |
- |
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY
for Manual Seat:
Click here ![]()
for Power Seat:
Click here ![]()
2. REMOVE AUDIO AMPLIFIER COVER

3. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

4. REMOVE NO. 1 AMPLIFIER BRACKET

5. REMOVE NO. 2 AMPLIFIER BRACKET

Removal
REMOVAL
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during stereo component amplifier assembly removal/installation are shown below.
CAUTION:
Be sure to read Precaution thoroughly before servicing.

Click here ![]()
NOTICE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here

- To prevent the key from being locked in the Toyota Prius vehicle, make sure to enter e-latch inspection mode and enable the manual release handle before disconnecting the cable from the negative (-) auxiliary battery terminal.
Click here

HINT:
- When the cable is disconnected / reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used. Learning completes when Toyota Prius vehicle is driven
Learning completes when vehicle is operated normallyEffect/Inoperative Function When Necessary Procedures are not Performed
Necessary Procedures
Link
Front Camera System
Drive the Toyota Prius vehicle straight ahead at 35 km/h or more for 5 seconds or more.

Effect/Inoperative Function When Necessary Procedures are not Performed
Necessary Procedures
Link
*1: w/o Power Back Door System *2: w/ Power Back Door System
Power Door Lock Control System*1
- Back door opener
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.

Power Back Door System*2
Reset back door close position

Air Conditioning System
for HEV Model: - After the ignition switch is turned to ON, the servo motor standard position is recognized.
- After the ignition switch is turned to ON, the servo motor and expansion valve standard position is recognized.
-

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FRONT SEAT ASSEMBLY |
- |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
2 |
AUDIO AMPLIFIER COVER |
86183D |
- |
- |
- |
3 |
STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET |
- |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
4 |
NO. 1 AMPLIFIER BRACKET |
86285 |
- |
- |
- |
5 |
NO. 2 AMPLIFIER BRACKET |
86285F |
- |
- |
- |
*1 |
STEREO COMPONENT AMPLIFIER ASSEMBLY |
- |
- |
PROCEDURE
1. REMOVE FRONT SEAT ASSEMBLY
for Manual Seat:
Click here ![]()
for Power Seat:
Click here ![]()
2. REMOVE AUDIO AMPLIFIER COVER

3. REMOVE STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET

4. REMOVE NO. 1 AMPLIFIER BRACKET

5. REMOVE NO. 2 AMPLIFIER BRACKET

Installation
INSTALLATION

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
NO. 2 AMPLIFIER BRACKET |
86285F |
- |
- |
- |
2 |
NO. 1 AMPLIFIER BRACKET |
86285 |
- |
- |
- |
*1 |
STEREO COMPONENT AMPLIFIER ASSEMBLY |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
3 |
STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET |
- |
- |
- |
- |
4 |
AUDIO AMPLIFIER COVER |
86183D |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
5 |
FRONT SEAT ASSEMBLY |
- |
- |
- |
- |
PROCEDURE
1. INSTALL NO. 2 AMPLIFIER BRACKET
2. INSTALL NO. 1 AMPLIFIER BRACKET
3. INSTALL STEREO COMPONENT AMPLIFIER ASSEMBLY WITH BRACKET
4. INSTALL AUDIO AMPLIFIER COVER
5. INSTALL FRONT SEAT ASSEMBLY
for Manual Seat:
Click here ![]()
for Power Seat:
Click here ![]()


























