Air Conditioning Unit

In this manual: Air Conditioning Unit
How To Troubleshoot Ecu Controlled Systems — 1How To Use This Manual — 1Identification Information — 1Repair Instruction — 1Terms — 12zr-fxe Air Cleaner Filter Element — 12zr-fxe Auxiliary Battery — 12zr-fxe Coolant (for Engine Coolant) — 12zr-fxe Oil And Oil Filter — 12zr-fxe Spark Plug — 1Air Conditioning Filter — 1Battery Cooling Filter — 1Brake Fluid — 1Coolant (for Inverter) — 1Front Brake Flexible Hose — 1Front Disc Brake Pad — 1Front Lower Ball Joint — 1Front Wheel Alignment — 1Front Wiper Rubber — 1General Maintenance — 1M20a-fxs Air Cleaner Filter Element — 1M20a-fxs Auxiliary Battery — 1M20a-fxs Coolant (for Engine Coolant) — 1M20a-fxs Oil And Oil Filter — 1M20a-fxs Spark Plug — 1Pa10/pb10/pb12 Hybrid Transaxle Fluid — 1Q810 Hybrid Transaxle Fluid — 1Rear Brake Flexible Hose — 1Rear Disc Brake Pad — 1Rear Wheel Alignment — 1Steering Column — 1Tire And Wheel — 1Transmitter Battery — 1When Disconnecting Or Reconnecting Battery Terminal — 1When Replacing Or Removing/installing Parts — 1Automatic High Beam Main Switch — 1Automatic High Beam System — 1Driver Monitor Camera — 1Driver Monitor Camera System — 1Driver Monitor Ecu — 1Front Camera — 1Front Camera System — 1Front Radar Sensor System — 1Front Side Radar Sensor — 1Front Side Radar Sensor System — 1Millimeter Wave Radar Sensor — 1Utility — 1Advanced Park — 1Advanced Park Main Switch — 1Amplifier Antenna — 1Audio And Visual System — 1Front Door Speaker — 1Instrument Panel Speaker — 1Microphone — 1Noise Filter — 1Pillar Speaker — 1Radio Antenna Cord (for Back Door) — 1Radio Antenna Cord (for Instrument Panel) — 1Radio Antenna Cord (for Roof) — 1Radio Receiver — 1Rear Door Speaker — 1Roof Antenna — 1Stereo Component Amplifier — 1Stereo Jack Adapter Assembly — 1Window Glass Antenna Wire — 1Back-up Battery — 1Dcm(telematics Transceiver) — 1Manual(sos)switch — 1Safety Connect System — 1Telephone And Gps Antenna (for Front Side) — 1Telephone And Gps Antenna (for Roof Side) — 1Telephone And Gps Antenna Cords — 1Garage Door Opener System (for Digital Inner Mirror) — 1Garage Door Opener System (for Ec Inner Mirror) — 1Blind Spot Monitor Sensor — 1Blind Spot Monitor System — 1Clearance Warning Ecu — 1Intuitive Parking Assist System — 1Panoramic View Monitor Switch — 1Panoramic View Monitor System — 1Parking Assist Ecu — 1Parking Assist Light — 1Parking Assist Monitor System — 1Parking Support Brake System — 1Rear View Monitor System — 1Television Camera (for Front) — 1Television Camera (for Rear) — 1Television Camera (for Side) — 1Ultrasonic Sensor (for Front) — 1Ultrasonic Sensor (for Rear) — 1Brake Actuator — 1Brake Pedal Stroke Sensor — 1Electronically Controlled Brake System — 1Front Speed Sensor — 1Rear Speed Sensor (for Awd) — 1Steering Angle Sensor — 1Brake Booster — 1Brake Fluid — 1Brake Line — 1Brake Pedal — 1Brake System — 1Electric Parking Brake Actuator — 1Electric Parking Brake Switch — 1Electric Parking Brake System — 1Forced Release — 1Front Axle Hub — 1Front Axle Hub Bolt — 1Rear Axle Carrier (for 2wd) — 1Rear Axle Carrier (for Awd) — 1Rear Axle Hub (for 2wd) — 1Rear Axle Hub (for Awd) — 1Rear Axle Hub Bolt — 1Steering Knuckle — 1Drive Shaft System — 1Front Drive Shaft Assembly — 1Rear Drive Shaft Assembly — 1Combination Switch — 1Electronic Shift Lever System — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Oil Seal — 1Hybrid Transaxle System — 1Input Shaft Oil Seal — 1Motor Cable — 1Pa10 Hybrid Vehicle Transaxle — 1Pa10 Manual Parking Lock Release — 1Pa10 Oil Cooler — 1Pb10/pb12 Hybrid Vehicle Transaxle — 1Pb10/pb12 Manual Parking Lock Release — 1Pb10/pb12 Oil Cooler — 1Shift Control Actuator — 1Shift Lever — 1Shift Lever Knob — 1Differential Side Gear Shaft — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Side Gear Oil Seal — 1Motor Cable — 1Rear Traction Motor — 1Coolant (for Engine) — 1Cooling Fan Motor — 1Cooling Fan System — 1Radiator — 1Relay — 1Thermostat — 1Water Pump — 1Canister — 1Egr Cooler — 1Egr Valve — 1Emission Control System — 1Fuel Tank Cap — 1Pcv Valve — 1Purge Valve — 1Vacuum Sensor — 1Air Fuel Ratio Sensor — 1Camshaft Oil Control Valve — 1Camshaft Position Sensor — 1Crankshaft Position Sensor — 1Ecm — 1Engine Coolant Temperature Sensor — 1Heated Oxygen Sensor — 1Ignition Coil And Spark Plug — 1Ignition System — 1Knock Sensor — 1Mass Air Flow Meter — 1Relay — 1Sfi System — 1Throttle Body — 1Camshaft — 1Cylinder Block — 1Cylinder Head — 1Cylinder Head Gasket — 1Engine — 1Engine Assembly — 1Engine Unit — 1Front Crankshaft Oil Seal — 1Rear Crankshaft Oil Seal — 1Fuel Filter — 1Fuel Injector — 1Fuel Pressure Regulator — 1Fuel Pump — 1Fuel Sender Gauge Assembly — 1Fuel System — 1Fuel Tank — 1Air Cleaner Filter Element — 1Exhaust Manifold — 1Exhaust Pipe — 1Intake Manifold — 1Intake System — 1Lubrication System — 1Oil And Oil Filter — 1Oil Pan And Oil Level Sensor — 1Oil Pressure Switch — 1Oil Pump — 1Accelerator Pedal Sensor — 1Battery Blower (for Hev Model) — 1Battery Ecu (for Hev Model) — 1Battery Ecu (for Phev Model) — 1Battery Voltage Sensor (for Phev Model) — 1Charge Cable (for Phev Model) — 1Charge Indicator (for Phev Model) — 1Charge Inlet (for Phev Model) — 1Combination Switch — 1Coolant (for Inverter) — 1Cooler (for Phev Model) — 1Electric Vehicle Charger Assembly (for Phev Model) — 1Frame Wire (for Hev Model) — 1Frame Wire (for Phev Model) — 1Heater Relay (for Phev Model) — 1Hv Battery (for Hev Model) — 1Hv Battery (for Phev Model) — 1Hv Battery Heater (for Phev Model) — 1Hv Battery Stack (for Phev Model) — 1Hv Relay Assembly (for Hev Model) — 1Hv Relay Assembly (for Phev Model) — 1Hybrid Battery System (for 2zr-fxe) — 1Hybrid Battery System (for M20a-fxs) — 1Hybrid Battery System (for Phev Model) — 1Hybrid Vehicle Control Ecu — 1Inverter With Converter (for Hev Model) — 1Motor Generator Control System (for 2zr-fxe) — 1Plug-in Charge Control System (for Phev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Service Plug Grip (for Hev Model) — 1Sub Radiator — 1Water Pump With Motor — 1Auxiliary Battery — 1Battery Current Sensor — 1Charging System — 1Solar Charging System — 1Solar Control Unit — 1Solar Roof — 1Can Communication System (for Hev Model) — 1Lin Communication System — 1Network Gateway Ecu — 1Integration Control Supply — 1Main Body Ecu — 1Power Integration System — 1Sub Battery System — 1Power Steering Ecu — 1Power Steering System — 1Heated Steering Wheel Controller — 1Heated Steering Wheel System — 1Steering Column Assembly — 1Steering Heater Switch — 1Steering Pad Switch — 1Steering System — 1Steering Wheel — 1Front Lower Ball Joint — 1Front Lower Suspension Arm (for 2zr-fxe Lh Side) — 1Front Lower Suspension Arm (for 2zr-fxe Rh Side) — 1Front Lower Suspension Arm (for M20a-fxs) — 1Front Shock Absorber — 1Front Stabilizer Bar — 1Front Suspension Member — 1Rear Coil Spring — 1Rear Lower Arm (for Awd Lh Side) — 1Rear Lower Arm (for Awd Rh Side) — 1Rear Lower Arm (for Hev Model 2wd) — 1Rear Lower Arm (for Phev Model) — 1Rear Shock Absorber — 1Rear Stabilizer Bar — 1Rear Suspension Member (for 2wd) — 1Rear Suspension Member (for Awd) — 1Rear Trailing Arm — 1Rear Upper Arm — 1Tire And Wheel System — 1Tire Repair Seal — 1Tire Pressure Warning Receiver — 1Tire Pressure Warning System — 1Tire Pressure Warning Valve — 1Acoustic Vehicle Alerting System — 1Vehicle Approaching Speaker — 1Vehicle Approaching Speaker Ecu — 1Back Door — 1Back Door Closer Ecu — 1Back Door Opener Switch — 1Back Door Support — 1Back Door Weatherstrip — 1Charge Lid Courtesy Switch — 1Charge Lid Opener Motor Assembly — 1Charge Lid Opener System — 1Charge Lid Opener Unit — 1Front Door — 1Front Door Opening Trim Weatherstrip — 1Fuel Lid Opener Motor Assembly — 1Fuel Lid Opener Switch — 1Fuel Lid Opener System — 1Hood — 1Hood Lock Control Cable Assembly — 1Power Back Door Closer Switch — 1Power Back Door Control Switch — 1Power Back Door Drive Unit — 1Power Back Door System — 1Power Back Door Touch Sensor — 1Power Back Door Warning Buzzer — 1Rear Door — 1Rear Door Opening Trim Weatherstrip — 1Reserve Lock Switch — 1Front Bumper — 1Front Door Belt Moulding — 1Front Door Window Frame Moulding — 1Front Fender — 1Front Pillar Upper Cover — 1Grille Shutter — 1Grille Shutter System — 1Name Plate — 1Quarter Garnish — 1Rear Bumper — 1Rear Door Belt Moulding — 1Rear Door Window Frame Moulding — 1Rear Wheel House Plate — 1Rocker Panel Moulding — 1Roof Drip Side Finish Moulding — 1Roof Garnish — 1Wheel Opening Moulding (for Front Side) — 1Wheel Opening Moulding (for Rear Side) — 1Windshield Outside Moulding — 1Horn — 1Horn System — 1Relay — 1Automatic Light Control Sensor — 1Back-up Light Assembly — 1Charge Lid Light — 1Front Marker Light — 1Hazard Warning Switch — 1Headlight Assembly — 1Headlight Dimmer Switch — 1Headlight Leveling Switch — 1High Mounted Stop Light Assembly — 1Illumination Light Assembly — 1License Plate Light Assembly — 1Lighting System — 1Rear Combination Light Assembly — 1Rear Light Assembly — 1Rear Side Marker Light Assembly — 1Relay — 1Side Turn Signal Light Assembly — 1Stop Light Switch — 1Switch Housing — 1Outer Mirror Switch — 1Outer Rear View Mirror — 1Outer Rear View Mirror Cover — 1Outer Rear View Mirror Glass — 1Power Mirror Control System — 1Back Door Glass — 1Front Passenger Side Power Window Switch — 1Power Window Control System — 1Power Window Master Switch — 1Power Window Regulator Motor (for Front Door) — 1Power Window Regulator Motor (for Rear Door) — 1Rear Power Window Switch — 1Relay — 1Roof Window Fix Glass — 1Window Defogger System — 1Windshield Deicer Switch — 1Windshield Deicer System — 1Windshield Glass — 1Front Wiper Motor — 1Rain Sensor — 1Relay — 1Washer Motor — 1Washer Nozzle (for Front Side) — 1Washer Nozzle (for Rear Television Camera) — 1Wiper And Washer System — 1Wiper Ecu — 1Wiper Switch — 1Back Door Lock — 1Door Control Receiver — 1Door Control Switch — 1Door Control Transmitter — 1Door Lock Release Motor (for Rear Side) — 1Door Outside Handle (for Rear Side) — 1Front Door Lock — 1Power Door Lock Control System — 1Rear Door Lock — 1Transmitter Battery — 1Wireless Door Lock Control System — 1Accumulator — 1Air Conditioning Amplifier — 1Air Conditioning Panel — 1Air Conditioning Pressure Sensor — 1Air Conditioning Unit — 1Ambient Temperature Sensor — 1Blower Unit — 1Condenser (for Hev Model) — 1Condenser (for Phev Model) — 1Discharge Temperature Sensor — 1Electric Expansion Valve (cooling) — 1Electric Expansion Valve (heating) — 1Evaporator Pipe Temperature Sensor — 1Evaporator Pressure Regulator — 1Front Blower Motor — 1Front Evaporator Front Solenoid Valve — 1Air Conditioning System (for Hev Model) — 1Front Evaporator Temperature Sensor — 1Heat Exchanger Temperature Sensor — 1Heat Pump Ecu — 1High Pressure Magnetic Valve — 1Humidity Sensor — 1Internal Condenser Temperature Sensor — 1Low Pressure Magnetic Valve — 1Refrigerant (for Hfc-134a(r134a)) — 1Refrigerant Line (for Hev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Room Temperature Sensor — 1Solar Sensor — 1Floor Carpet — 1Front Console Box — 1Instrument Panel Safety Pad — 1Roof Headlining — 1Roof Sunshade — 1Ambient Light (for Driver Side) — 1Ambient Light (for Front Passenger Side) — 1Back Door Courtesy Switch — 1Footwell Light — 1Glove Box Light — 1Lighting System — 1Luggage Compartment Room Light — 1Personal Light — 1Room Light — 1Vanity Light — 1Vanity Light Switch — 1Combination Meter — 1Meter / Gauge System — 1Trip Switch — 1Digital Inner Mirror — 1Digital Rear-view Mirror System — 1Inner Mirror Monitor Camera — 1Inner Rear View Mirror (w/o Ec Mirror) — 1Accessory Power Outlet System — 1Power Outlet Socket (for Console Box Front Side) — 1Power Outlet Socket (for Console Box Rear Side) — 1Power Outlet Socket (for Console Box) — 1Power Outlet Socket (for Luggage Compartment) — 1Power Outlet Switch — 1Wireless Charger Assembly — 1Wireless Charging System — 1Climate Control Seat System — 1Front Power Seat Control System (w/ Memory) — 1Front Power Seat Motor Assembly — 1Front Seat Assembly (for Power Seat) — 1Front Seat Cushion Heater (for Power Seat) — 1Front Seatback Heater (for Power Seat) — 1Lumbar Support Adjuster Assembly — 1Power Seat Control Ecu — 1Power Seat Switch — 1Power Seat Track Rail Assembly — 1Rear Seat Assembly — 1Rear Seat Cushion Heater — 1Rear Seat Reminder System — 1Rear Seatback Heater — 1Seat Heater Control — 1Seat Heater Switch (for Front Seat) — 1Seat Heater Switch (for Rear Side) — 1Seat Heater System — 1Seat Memory Switch — 1Child Restraint Seat Anchor Bracket — 1Front Seat Inner Belt Assembly — 1Front Seat Outer Belt Assembly — 1Occupant Detection Sensor (for Front Passenger Side) — 1Rear Center Seat Outer Belt Assembly — 1Rear Seat Inner Belt Assembly (for Rh Side) — 1Rear Seat Outer Belt Assembly — 1Seat Belt Warning System (w/ Occupant Classification System) — 1Tongue Plate Stopper — 1Airbag System — 1Center Airbag Sensor Assembly — 1Curtain Shield Airbag Assembly — 1Front Airbag Sensor — 1Front Passenger Airbag Assembly — 1Front Seat Side Airbag Assembly — 1Inspection After Collision — 1Knee Airbag Assembly — 1Occupant Classification System — 1Rear Seat Side Airbag Assembly — 1Side Airbag Sensor (for Center Pillar) — 1Side Airbag Sensor (for Front Door) — 1Spiral Cable — 1Steering Pad — 1Certification Ecu — 1Digital Key Ecu — 1Digital Key Receiver (for Front Floor) — 1Digital Key Receiver (for Outside Luggage Compartment) — 1Digital Key Receiver (for Rear Door) — 1Digital Key System — 1Electrical Key Oscillator (for Front Floor) — 1Electrical Key Oscillator (for Outside Luggage Compartment) — 1Electrical Key Oscillator (for Rear Floor) — 1Engine Hood Courtesy Switch — 1Id Code Box — 1Smart Key System (for Start Function) — 1
~33min read
010203040505.44N·mlb·ft
Tightening torque found on this page
  • Removal
  • Disassembly
  • Reassembly
  • Installation

Removal

REMOVAL

The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during air conditioner unit removal/installation are shown below.

Necessary Procedures After Parts Removed/Installed/Replaced

Replaced Part or Performed Procedure

Necessary Procedures

Effect/Inoperative Function When Necessary Procedures are not Performed

Link

*: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation.
w/ Occupant Classification System:
  • Front passenger seat*

Zero point calibration (Occupant classification system)

  • Occupant Classification System
  • Passenger airbag ON/OFF indicator
  • Airbag System (Front passenger side)
  • Seat Belt Warning System (Front passenger)

CAUTION:

Be sure to read Precaution thoroughly before servicing.

Click here

NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click here

HINT:

When the cable is disconnected / reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.

Learning completes when Toyota Prius vehicle is driven

Effect/Inoperative Function When Necessary Procedures are not Performed

Necessary Procedures

Link

Front Camera System

Drive the Toyota Prius vehicle straight ahead at 35 km/h or more for 5 seconds or more.

Learning completes when vehicle is operated normally

Effect/Inoperative Function When Necessary Procedures are not Performed

Necessary Procedures

Link

*1: w/o Power Back Door System

*2: w/ Power Back Door System

Power Door Lock Control System*1

  • Back door opener

Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.

Power Back Door System*2

Reset back door close position

Air Conditioning System

for HEV Model:
  • After the ignition switch is turned to ON, the servo motor standard position is recognized.
for PHEV Model:
  • After the ignition switch is turned to ON, the servo motor and expansion valve standard position is recognized.

-

COMPONENTS (REMOVAL)

Procedure

Part Name Code

1

RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

-

-

-

2

WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

-

-

-

-

3

WATER GUARD PLATE

55734D

-

-

-

4

OUTER COWL TOP PANEL SUB-ASSEMBLY

55701J

-

-

-

Procedure

Part Name Code

5

SUCTION PIPE SUB-ASSEMBLY

88707

-

-

6

NO. 1 SUCTION TUBE

88717U

-

-

7

NO. 7 DISCHARGE TUBE

88G15H

-

-

8

DISCHARGE TUBE SUB-ASSEMBLY

88705A

-

-

9

NO. 2 DISCHARGE HOSE SUB-ASSEMBLY

88703B

-

-

10

WATER HOSE SUB-ASSEMBLY

87209

-

-

11

OUTLET HEATER WATER HOSE

87246

-

-

12

INLET HEATER WATER HOSE

87245

-

-

13

STEERING COLUMN ASSEMBLY

-

-

-

-

14

INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

-

-

-

-

*A

for M20A-FXS

*B

for 2ZR-FXE

*C

for HEV Model

*D

for PHEV Model

●

Non-reusable part

-

-

Procedure

Part Name Code

15

FRONT SEAT ASSEMBLY LH

-

-

-

-

16

FRONT SEAT ASSEMBLY RH

-

-

-

-

Procedure

Part Name Code

17

ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY

78110K

-

-

-

18

COOLER (ROOM TEMP. SENSOR) THERMISTOR

88625Q

-

-

-

19

FRONT FLOOR CARPET ASSEMBLY

58510D

-

-

-

20

REAR NO. 5 AIR DUCT

87217C

-

-

-

21

REAR NO. 4 AIR DUCT

87216B

-

-

-

22

REAR NO. 2 AIR DUCT

87213

-

-

-

23

REAR NO. 1 AIR DUCT

87212

-

-

-

24

REAR NO. 3 AIR DUCT

87215F

-

-

-

25

NO. 3 DASH PANEL INSULATOR PAD

55215D

-

-

*A

w/ Rear Air Duct

-

-

●

Non-reusable part

-

-

Procedure

Part Name Code

26

DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

-

-

-

-

27

DRIVER MONITOR ECU ASSEMBLY

86470

-

-

-

28

NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

55308B

-

-

-

29

JUNCTION BLOCK BRACKET WITH POWER DISTRIBUTION BOX ASSEMBLY

-

-

-

*A

w/ Telematics Transceiver

*B

w/ Driver Monitor Camera

Procedure

Part Name Code

30

INSTRUMENT PANEL WIRE

82141

-

-

31

NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

55306A

-

-

-

32

NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

55307C

-

-

-

33

DRAIN COOLER HOSE

88539J

-

-

34

COOLER UNIT DRAIN HOSE GROMMET

88539G

-

-

35

INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONER UNIT ASSEMBLY

-

-

-

*1

CONNECTOR HOLDER

-

-

●

Non-reusable part

-

-

Procedure

Part Name Code

36

AIR CONDITIONER UNIT ASSEMBLY

-

-

-

-

PROCEDURE

1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

(a) for HFC-134a (R134a):

Click here

(b) for HFO-1234yf (R1234yf):

(1) for HEV Model:

Click here

(2) for PHEV Model:

Click here

2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Click here

3. REMOVE WATER GUARD PLATE

Click here

4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

Click here

5. DISCONNECT SUCTION PIPE SUB-ASSEMBLY (for HEV Model)

(1) Remove the bolt.

(2) Rotate the hook connector as shown in the illustration and disconnect the suction pipe sub-assembly.

(3) Remove the 2 O-rings from the suction pipe sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

6. DISCONNECT NO. 1 SUCTION TUBE (for PHEV Model)

(1) Remove the bolt.

(2) Rotate the hook connector as shown in the illustration and disconnect the No. 1 suction tube.

(3) Remove the O-ring from the No. 1 suction tube.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

7. DISCONNECT NO. 7 DISCHARGE TUBE (for PHEV Model)

(1) Disconnect the No. 7 discharge tube.

(2) Remove the O-ring from the No. 7 discharge tube.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

8. DISCONNECT DISCHARGE TUBE SUB-ASSEMBLY (for PHEV Model)

(1) Remove the bolt.

(2) Rotate the hook connector as shown in the illustration and disconnect the discharge tube sub-assembly.

(3) Remove the O-ring from the discharge tube sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

9. DISCONNECT NO. 2 DISCHARGE HOSE SUB-ASSEMBLY (for PHEV Model)

(1) Disconnect the No. 2 discharge hose sub-assembly.

(2) Remove the O-ring from the No. 2 discharge hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

10. DISCONNECT WATER HOSE SUB-ASSEMBLY (for M20A-FXS)

(1) Using pliers, grip the claws of the hose clips and slide the hose clips and disconnect the water hose sub-assembly.

NOTICE:

  • Do not apply excessive force to the water hose sub-assembly.
  • Prepare a drain pan or cloth in case the coolant leaks.

11. DISCONNECT OUTLET HEATER WATER HOSE (for 2ZR-FXE)

(1) Using pliers, grip the claws of the hose clip and slide the hose clip and disconnect the outlet heater water hose.

NOTICE:

  • Do not apply excessive force to the outlet heater water hose.
  • Prepare a drain pan or cloth in case the coolant leaks.

12. DISCONNECT INLET HEATER WATER HOSE (for 2ZR-FXE)

(1) Using pliers, grip the claws of the hose clip and slide the hose clip and disconnect the inlet heater water hose.

NOTICE:

  • Do not apply excessive force to the inlet heater water hose.
  • Prepare a drain pan or cloth in case the coolant leaks.

13. REMOVE STEERING COLUMN ASSEMBLY

Click here

14. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Click here

15. REMOVE FRONT SEAT ASSEMBLY LH

(a) for Manual Seat:

Click here

(b) for Power Seat:

Click here

16. REMOVE FRONT SEAT ASSEMBLY RH

(a) Use the same procedure as for the LH side.

17. REMOVE ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY

Click here

18. REMOVE COOLER (ROOM TEMP. SENSOR) THERMISTOR

19. DISCONNECT FRONT FLOOR CARPET ASSEMBLY

20. REMOVE REAR NO. 5 AIR DUCT (w/ Rear Air Duct)

21. REMOVE REAR NO. 4 AIR DUCT (w/ Rear Air Duct)

22. REMOVE REAR NO. 2 AIR DUCT (w/ Rear Air Duct)

23. REMOVE REAR NO. 1 AIR DUCT (w/ Rear Air Duct)

24. REMOVE REAR NO. 3 AIR DUCT (w/ Rear Air Duct)

25. REMOVE NO. 3 DASH PANEL INSULATOR PAD

*a

Cut

-

-

(1) Cut each claw of the 2 clips and remove the No. 3 dash panel insulator pad.

NOTICE:

If the No. 3 dash panel insulator pad is damaged, replace it with a new one.

(2) Remove the 2 clips.

26. REMOVE DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Telematics Transceiver)

Click here

27. REMOVE DRIVER MONITOR ECU ASSEMBLY (w/ Driver Monitor Camera)

Click here

28. REMOVE NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

Click here

29. REMOVE JUNCTION BLOCK BRACKET WITH POWER DISTRIBUTION BOX ASSEMBLY

Click here

30. DISCONNECT INSTRUMENT PANEL WIRE

HINT:

The illustration shown is an example only. The illustration may differ from the actual parts according to the model.

(1) Remove the 4 bolts and disconnect the 4 earth wires.

(2) Disconnect each connector.

(3) Disengage each clamp.

(1) Remove the bolt and 2 nuts, and disconnect the connector holder.

Release (1)

Move in this Direction (2)

(1) Push down the part (A) in the direction indicated by the arrow (1), to release the lock, and then move the lock lever in the direction indicated by the arrow (2) shown in the illustration to disconnect the connector.

NOTICE:

When disconnecting any airbag connector, take care not to damage the airbag wire harness.

(2) Disengage each clamp and disconnect the instrument panel wire.

31. REMOVE NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

Remove in this Direction

-

-

32. REMOVE NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

Remove in this Direction

-

-

33. DISCONNECT DRAIN COOLER HOSE

(1) Disconnect the drain cooler hose from the cooler unit drain hose grommet.

NOTICE:

If the cooler unit drain hose grommet was removed from the Toyota Prius vehicle body, replace it with a new one.

34. REMOVE COOLER UNIT DRAIN HOSE GROMMET

HINT:

Perform this procedure only when replacement of the cooler unit drain hose grommet is necessary.

(1) Remove the cooler unit drain hose grommet.

NOTICE:

After removing the cooler unit drain hose grommet, replace it with a new one to prevent water from entering.

35. REMOVE INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONER UNIT ASSEMBLY

NOTICE:

  • Be sure to support the air conditioner unit assembly when removing it. Failure to do so may cause the bracket of the air conditioner unit assembly to break.
  • When disassembling the air conditioner unit assembly, eliminate static electricity by touching the Toyota Prius vehicle body to prevent the components from being damaged.

(c) for HEV Model:

Remove in this Direction

-

-

(d) for PHEV Model:

Remove in this Direction

-

-

(e) for HEV Model:

Remove in this Direction

-

-

(f) for PHEV Model:

Remove in this Direction

-

-

36. REMOVE AIR CONDITIONER UNIT ASSEMBLY

Disassembly

DISASSEMBLY

COMPONENTS (DISASSEMBLY)

Procedure

Part Name Code

1

BLOWER ASSEMBLY

87130D

-

-

-

2

NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

55086

-

-

-

3

LOWER DEFROSTER NOZZLE ASSEMBLY

55990B

-

-

-

4

LOWER DEFROSTER NOZZLE

55967B

-

-

-

5

ASPIRATOR

88897P

-

-

-

6

AIR CONDITIONING HARNESS ASSEMBLY

82210K

-

-

-

Procedure

Part Name Code

7

DRAIN COOLER HOSE

88539J

-

-

-

8

COVER

88482A

-

-

-

9

AIR DUCT

87413

-

-

-

10

NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

87050C

-

-

-

11

HEATER COVER

87114B

-

-

-

12

AIR CONDITIONING AMPLIFIER ASSEMBLY

88650N

-

-

-

13

HEATER PIPE GROMMET

88897M

-

-

-

14

HEATER CLAMP

87124C

-

-

-

15

HEATER RADIATOR UNIT SUB-ASSEMBLY

87107A

-

-

*A

w/o Rear Air Duct

*B

w/ Rear Air Duct

*C

for HEV Model

-

-

Procedure

Part Name Code

16

COOLER PIPE GROMMET

88899K

-

-

-

17

COOLER EXPANSION VALVE

88515

-

-

18

CONNECTOR TUBE

-

-

-

19

COOLING UNIT PARTS

88899L

-

-

-

20

NO. 1 DISCHARGE TUBE

88715M

-

-

21

NO. 1 COOLING UNIT PACKING

88578B

-

-

-

22

INTERNAL CONDENSER TEMPERATURE SENSOR

88620H

-

-

-

23

NO. 1 COOLING UNIT PACKING

88578B

-

-

-

24

DISCHARGE TEMPERATURE SENSOR

88620J

-

-

-

25

CONDENSER ASSEMBLY

88460Q

-

-

-

26

NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

88501

-

-

27

NO. 1 COOLER THERMISTOR

88625

-

-

-

*A

for HEV Model

*B

for PHEV Model

*1

UPPER HEATER CASE

*2

LOWER HEATER CASE

*3

CLAMP

-

-

●

Non-reusable part

-

-

PROCEDURE

1. REMOVE BLOWER ASSEMBLY

Click here

2. REMOVE NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

3. REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY

4. REMOVE LOWER DEFROSTER NOZZLE

5. REMOVE ASPIRATOR

6. REMOVE AIR CONDITIONING HARNESS ASSEMBLY

(a) for HEV Model:

(b) for PHEV Model:

7. REMOVE DRAIN COOLER HOSE

8. REMOVE COVER (w/o Rear Air Duct)

9. REMOVE AIR DUCT (w/ Rear Air Duct)

10. REMOVE NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

11. REMOVE HEATER COVER (for HEV Model)

Remove in this Direction

-

-

12. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY

Remove in this Direction

-

-

13. REMOVE HEATER PIPE GROMMET

14. REMOVE HEATER CLAMP

15. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY

Remove in this Direction

-

-

(1) Remove the heater radiator unit sub-assembly as shown in the illustration.

NOTICE:

Prepare a drain pan or cloth in case the coolant leaks.

16. REMOVE COOLER PIPE GROMMET

17. REMOVE COOLER EXPANSION VALVE (for HEV Model)

(1) Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and cooler expansion valve.

(2) Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

18. REMOVE CONNECTOR TUBE (for PHEV Model)

(1) Using a 4 mm hexagon socket wrench, remove the 2 hexagon bolts and connector tube.

(2) Remove the 2 O-rings from the No. 1 cooler evaporator sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

19. REMOVE COOLING UNIT PARTS (for PHEV Model)

20. REMOVE NO. 1 DISCHARGE TUBE (for PHEV Model)

*a

Clamp

*b

Guide

(1) Disengage the 2 clamps and 4 guides.

(2) Remove the bolt and nut, and No. 1 discharge tube.

(3) Remove the 2 O-rings from the No. 1 discharge tube.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.

21. REMOVE NO. 1 COOLING UNIT PACKING (for PHEV Model)

Click here

22. REMOVE INTERNAL CONDENSER TEMPERATURE SENSOR (for PHEV Model)

Click here

23. REMOVE NO. 1 COOLING UNIT PACKING (for PHEV Model)

Click here

24. REMOVE DISCHARGE TEMPERATURE SENSOR (for PHEV Model)

Click here

25. REMOVE CONDENSER ASSEMBLY (for PHEV Model)

Remove in this Direction

-

-

26. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

*1

Upper Heater Case

*2

Lower Heater Case

(1) Remove the 2 screws and disengage the 10 claws and 10 guides to remove the upper heater case with No. 1 cooler evaporator sub-assembly from the lower heater case.

(b) for HEV Model:

(1) Disengage the 2 clamps and remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.

NOTICE:

When the No. 1 cooler evaporator sub-assembly is removed, make sure to install a new one. The No. 1 cooler evaporator sub-assembly cannot be reused.

(c) for PHEV Model:

(1) Disengage the 2 clamps and remove the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor from the upper heater case.

NOTICE:

When the No. 1 cooler evaporator sub-assembly is removed, make sure to install a new one. The No. 1 cooler evaporator sub-assembly cannot be reused.

27. REMOVE NO. 1 COOLER THERMISTOR

Click here

Reassembly

REASSEMBLY

COMPONENTS (REASSEMBLY)

Procedure

Part Name Code

1

NO. 1 COOLER THERMISTOR

88625

-

-

2

NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

88501

-

-

3

CONDENSER ASSEMBLY

88460Q

-

-

-

4

DISCHARGE TEMPERATURE SENSOR

88620J

-

-

-

5

NO. 1 COOLING UNIT PACKING

88578B

-

-

6

INTERNAL CONDENSER TEMPERATURE SENSOR

88620H

-

-

-

7

NO. 1 COOLING UNIT PACKING

88578B

-

-

8

NO. 1 DISCHARGE TUBE

88715M

-

-

9

COOLING UNIT PARTS

88899L

-

-

10

CONNECTOR TUBE

-

-

-

11

COOLER EXPANSION VALVE

88515

-

-

12

COOLER PIPE GROMMET

88897K

-

-

-

*A

for HEV Model

*B

for PHEV Model

*1

UPPER HEATER CASE

*2

LOWER HEATER CASE

*3

CLAMP

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

●

Non-reusable part

Compressor oil ND-OIL 11 or equivalent

-

-

Procedure

Part Name Code

13

HEATER RADIATOR UNIT SUB-ASSEMBLY

87107A

-

-

-

14

HEATER CLAMP

87124C

-

-

-

15

HEATER PIPE GROMMET

88897M

-

-

16

AIR CONDITIONING AMPLIFIER ASSEMBLY

88650N

-

-

-

17

HEATER COVER

87114B

-

-

-

18

NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

87050C

-

-

19

COVER

88482A

-

-

-

20

AIR DUCT

87413

-

-

-

21

DRAIN COOLER HOSE

88539J

-

-

*A

w/o Rear Air Duct

*B

w/ Rear Air Duct

*C

for HEV Model

-

-

Procedure

Part Name Code

22

AIR CONDITIONING HARNESS ASSEMBLY

82210K

-

-

-

23

ASPIRATOR

88897P

-

-

-

24

LOWER DEFROSTER NOZZLE

55967B

-

-

-

25

LOWER DEFROSTER NOZZLE ASSEMBLY

55990B

-

-

-

26

NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

55086

-

-

-

27

BLOWER ASSEMBLY

87130D

-

-

-

PROCEDURE

1. INSTALL NO. 1 COOLER THERMISTOR

Click here

2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY

(a) for HEV Model:

(1) Engage the 2 clamps and install the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor to the upper heater case.

NOTICE:

When the No. 1 cooler evaporator sub-assembly is removed, make sure to install a new one. The No. 1 cooler evaporator sub-assembly cannot be reused.

(b) for PHEV Model:

(1) Engage the 2 clamps and install the No. 1 cooler evaporator sub-assembly with No. 1 cooler thermistor to the upper heater case.

NOTICE:

When the No. 1 cooler evaporator sub-assembly is removed, make sure to install a new one. The No. 1 cooler evaporator sub-assembly cannot be reused.

*1

Upper Heater Case

*2

Lower Heater Case

(1) Engage the 10 claws, 10 guides and install the upper heater case with No. 1 cooler evaporator sub-assembly to the lower heater case with the 2 screws.

3. INSTALL CONDENSER ASSEMBLY (for PHEV Model)

4. INSTALL DISCHARGE TEMPERATURE SENSOR (for PHEV Model)

Click here

5. INSTALL NO. 1 COOLING UNIT PACKING (for PHEV Model)

Click here

6. INSTALL INTERNAL CONDENSER TEMPERATURE SENSOR (for PHEV Model)

Click here

7. INSTALL NO. 1 COOLING UNIT PACKING (for PHEV Model)

Click here

8. INSTALL NO. 1 DISCHARGE TUBE (for PHEV Model)

*a

Clamp

*b

Guide

(1) Remove the vinyl tape from the No. 1 discharge tube, and sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 discharge tube.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the 2 O-rings to the No. 1 discharge tube.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.

(3) Install the No. 1 discharge tube with the bolt and nut.

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

(4) Engage the 4 guides and 2 clamps.

9. INSTALL COOLING UNIT PARTS (for PHEV Model)

*a

Reference Point

-

-

(1) Install the cooling unit parts as shown in the illustration.

NOTICE:

Install the cooling unit parts with the arrow facing down.

10. INSTALL CONNECTOR TUBE (for PHEV Model)

(1) Remove the vinyl tape from the No. 1 cooler evaporator sub-assembly, and sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 cooler evaporator sub-assembly.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.

(3) Using a 4 mm hexagon socket wrench, install the connector tube with the 2 hexagon bolts.

Torque:

3,5 N·m {36 kgf·cm, 31 in·lbf}

11. INSTALL COOLER EXPANSION VALVE (for HEV Model)

(1) Remove the vinyl tape from the No. 1 cooler evaporator sub-assembly, and sufficiently apply compressor oil to 2 new O-rings and the fitting surfaces of the No. 1 cooler evaporator sub-assembly.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the 2 O-rings to the No. 1 cooler evaporator sub-assembly.

NOTICE:

Keep the O-rings and O-ring fitting surfaces free of foreign matter.

(3) Using a 4 mm hexagon socket wrench, install the cooler expansion valve with the 2 hexagon bolts.

Torque:

3,5 N·m {36 kgf·cm, 31 in·lbf}

12. INSTALL COOLER PIPE GROMMET

13. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY

14. INSTALL HEATER CLAMP

15. INSTALL HEATER PIPE GROMMET

*a

Reference Point

-

-

(1) Install the heater pipe grommet as shown in the illustration.

NOTICE:

Install the heater pipe grommet with the arrow facing up.

16. INSTALL AIR CONDITIONING AMPLIFIER ASSEMBLY

17. INSTALL HEATER COVER (for HEV Model)

18. INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY

*a

Reference Point

-

-

(1) Align each gear on the air conditioning radiator assembly as shown in the illustration, and then check that the gears of the No. 1 air conditioning radiator damper servo sub-assembly are aligned as shown in the illustration.

(1) Engage the 2 guides to install the No. 1 air conditioning radiator damper servo sub-assembly with the 3 screws.

19. INSTALL COVER (w/o Rear Air Duct)

20. INSTALL AIR DUCT (w/ Rear Air Duct)

21. INSTALL DRAIN COOLER HOSE

*a

Hose Notch

*b

Rib

(1) Align the hose notch with the rib as shown in the illustration and install the drain cooler hose.

22. INSTALL AIR CONDITIONING HARNESS ASSEMBLY

23. INSTALL ASPIRATOR

24. INSTALL LOWER DEFROSTER NOZZLE

25. INSTALL LOWER DEFROSTER NOZZLE ASSEMBLY

26. INSTALL NO. 3 HEATER TO REGISTER DUCT SUB-ASSEMBLY

27. INSTALL BLOWER ASSEMBLY

Click here

Installation

INSTALLATION

COMPONENTS (INSTALLATION)

Procedure

Part Name Code

1

TEMPORARILY INSTALL AIR CONDITIONER UNIT ASSEMBLY

-

-

-

Procedure

Part Name Code

2

INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONER UNIT ASSEMBLY

-

-

-

3

COOLER UNIT DRAIN HOSE GROMMET

88539G

-

-

4

DRAIN COOLER HOSE

88539J

-

-

-

5

NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

55307C

-

-

6

NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

55306A

-

-

7

INSTALL AIR CONDITIONER UNIT ASSEMBLY

-

-

-

8

INSTRUMENT PANEL WIRE

82141

-

-

*1

CONNECTOR HOLDER

-

-

Tightening torque for "Major areas involving basic Toyota Prius vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)

N*m (kgf*cm, ft.*lbf): Specified torque

●

Non-reusable part

-

-

Procedure

Part Name Code

9

JUNCTION BLOCK BRACKET WITH POWER DISTRIBUTION BOX ASSEMBLY

-

-

-

10

NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

55308B

-

-

-

11

DRIVER MONITOR ECU ASSEMBLY

86470

-

-

-

12

DCM (TELEMATICS TRANSCEIVER) WITH BRACKET

-

-

-

-

*A

w/ Telematics Transceiver

*B

w/ Driver Monitor Camera

N*m (kgf*cm, ft.*lbf): Specified torque

-

-

Procedure

Part Name Code

13

NO. 3 DASH PANEL INSULATOR PAD

55215D

-

-

14

REAR NO. 3 AIR DUCT

87215F

-

-

-

15

REAR NO. 1 AIR DUCT

87212

-

-

-

16

REAR NO. 2 AIR DUCT

87213

-

-

-

17

REAR NO. 4 AIR DUCT

87216B

-

-

-

18

REAR NO. 5 AIR DUCT

87217C

-

-

-

19

FRONT FLOOR CARPET ASSEMBLY

58510D

-

-

-

20

COOLER (ROOM TEMP. SENSOR) THERMISTOR

88625Q

-

-

-

21

ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY

78110K

-

-

-

*A

w/ Rear Air Duct

-

-

●

Non-reusable part

-

-

Procedure

Part Name Code

22

FRONT SEAT ASSEMBLY LH

-

-

-

-

23

FRONT SEAT ASSEMBLY RH

-

-

-

-

Procedure

Part Name Code

24

INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

-

-

-

-

25

STEERING COLUMN ASSEMBLY

-

-

-

-

26

WATER HOSE SUB-ASSEMBLY

87209

-

-

27

INLET HEATER WATER HOSE

87245

-

-

28

OUTLET HEATER WATER HOSE

87246

-

-

29

NO. 2 DISCHARGE HOSE SUB-ASSEMBLY

88703B

-

-

30

DISCHARGE TUBE SUB-ASSEMBLY

88705A

-

-

31

NO. 7 DISCHARGE TUBE

88G15H

-

-

32

NO. 1 SUCTION TUBE

88717U

-

-

33

SUCTION PIPE SUB-ASSEMBLY

88707

-

-

*A

for M20A-FXS

*B

for 2ZR-FXE

*C

for HEV Model

*D

for PHEV Model

N*m (kgf*cm, ft.*lbf): Specified torque

●

Non-reusable part

Compressor oil ND-OIL 11 or equivalent

-

-

Procedure

Part Name Code

34

OUTER COWL TOP PANEL SUB-ASSEMBLY

55701J

-

-

-

35

WATER GUARD PLATE

55734D

-

-

-

36

WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

-

-

-

-

37

ADD ENGINE COOLANT (for Engine)

-

-

-

38

INSPECT FOR COOLANT LEAK (for Engine)

-

-

-

39

CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

-

-

-

40

WARM UP COMPRESSOR

-

-

-

41

INSPECT FOR REFRIGERANT LEAK

-

-

-

Tightening torque for "Major areas involving basic Toyota Prius vehicle performance such as moving/turning/stopping": N*m (kgf*cm, ft.*lbf)

N*m (kgf*cm, ft.*lbf): Specified torque

PROCEDURE

1. TEMPORARILY INSTALL AIR CONDITIONER UNIT ASSEMBLY

(1) Temporarily install the air conditioner unit assembly to the instrument panel reinforcement assembly with the 3 bolts.

2. INSTALL INSTRUMENT PANEL REINFORCEMENT ASSEMBLY WITH AIR CONDITIONER UNIT ASSEMBLY

NOTICE:

  • Be sure to support the air conditioner unit assembly when installing it. Failure to do so may cause the bracket of the air conditioner unit assembly to break.
  • When installing the air conditioner unit assembly, eliminate static electricity by touching the Toyota Prius vehicle body to prevent the components from being damaged.

(a) for HEV Model:

Install in this Direction

-

-

(b) for PHEV Model:

Install in this Direction

-

-

(c) for HEV Model:

Install in this Direction

-

-

(1) Temporarily install the instrument panel reinforcement assembly with air conditioner unit assembly as shown in the illustration.

(2) Engage each clamp.

(3) Connect each connector.

(d) for PHEV Model:

Install in this Direction

-

-

(1) Temporarily install the instrument panel reinforcement assembly with air conditioner unit assembly as shown in the illustration.

(2) Engage each clamp.

(3) Connect each connector.

*a

Bolt (A)

*b

Bolt (B)

*c

Nut

-

-

(1) Install the instrument panel reinforcement assembly with air conditioner unit assembly with the 4 bolts (A).

Torque:

25 N·m {255 kgf·cm, 18 ft·lbf}

NOTICE:

Tighten the bolts in the order shown in the illustration.

(2) Install the bolt (B).

Torque:

15 N·m {153 kgf·cm, 11 ft·lbf}

(3) Temporarily install the nut.

HINT:

Do not fully tighten the nut.

(1) Install the 2 bolts.

Torque:

25 N·m {255 kgf·cm, 18 ft·lbf}

3. INSTALL COOLER UNIT DRAIN HOSE GROMMET

*a

Lip

-

-

(1) Install a new cooler unit drain hose grommet.

NOTICE:

  • If the drain cooler hose is disconnected from the cooler unit drain hose grommet, make sure to replace the cooler unit drain hose grommet with a new one. Failure to do so may lead to water ingress.
  • Make sure that the entire lip of the cooler unit drain hose grommet is securely engaged to the Toyota Prius vehicle body.

4. CONNECT DRAIN COOLER HOSE

5. INSTALL NO. 2 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

Install in this Direction

-

-

(1) Temporarily install the screw.

HINT:

Do not fully tighten the screw.

(2) Install the No. 2 instrument panel brace sub-assembly with the bolt and nut.

Torque:

Bolt :

20 N·m {204 kgf·cm, 15 ft·lbf}

Nut :

18 N·m {184 kgf·cm, 13 ft·lbf}

(3) Install the front floor mat to the original position as shown in the illustration.

6. INSTALL NO. 1 INSTRUMENT PANEL BRACE SUB-ASSEMBLY

Install in this Direction

-

-

(1) Temporarily install the screw.

HINT:

Do not fully tighten the screw.

(2) Install the No. 1 instrument panel brace sub-assembly with the bolt and nut.

Torque:

Bolt :

20 N·m {204 kgf·cm, 15 ft·lbf}

Nut :

18 N·m {184 kgf·cm, 13 ft·lbf}

(3) Install the front floor mat to the original position as shown in the illustration.

7. INSTALL AIR CONDITIONER UNIT ASSEMBLY

(1) Tighten the 3 bolts, nut and 2 screws to install the air conditioner unit assembly.

Torque:

Bolt :

9,8 N·m {100 kgf·cm, 87 in·lbf}

Nut :

9,8 N·m {100 kgf·cm, 87 in·lbf}

NOTICE:

Tighten the bolts, nut and screws in the order shown in the illustration.

8. CONNECT INSTRUMENT PANEL WIRE

HINT:

The illustration shown is an example only. The illustration may differ from the actual parts according to the model.

*a

Lock Lever

-

-

Move in this Direction

-

-

(1) Engage each clamp.

(2) Temporarily connect the connector and then move the lock lever as shown in the illustration to securely connect the connector.

NOTICE:

When connecting any airbag connector, take care not to damage the airbag wire harness.

(3) Check that there is no looseness in the installed parts of the airbag sensor assembly.

(1) Connect the connector holder with the bolt and 2 nuts.

Torque:

8 N·m {82 kgf·cm, 71 in·lbf}

(1) Engage each clamp to connect the instrument panel wire.

(2) Connect each connector.

(3) Connect the 4 earth wires with the 4 bolts.

Torque:

8,5 N·m {87 kgf·cm, 75 in·lbf}

9. INSTALL JUNCTION BLOCK BRACKET WITH POWER DISTRIBUTION BOX ASSEMBLY

Click here

10. INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY

Click here

11. INSTALL DRIVER MONITOR ECU ASSEMBLY (w/ Driver Monitor Camera)

Click here

12. INSTALL DCM (TELEMATICS TRANSCEIVER) WITH BRACKET (w/ Telematics Transceiver)

Click here

13. INSTALL NO. 3 DASH PANEL INSULATOR PAD

*1

No. 3 Dash Panel Insulator Pad

*2

Drain Cooler Hose

*a

Paint Mark

-

-

(1) Install the No. 3 dash panel insulator pad with 2 new clips as shown in the illustration.

NOTICE:

After installing the No. 3 dash panel insulator pad, check that the paint mark of the drain cooler hose can be seen from the position shown in the illustration.

14. INSTALL REAR NO. 3 AIR DUCT (w/ Rear Air Duct)

15. INSTALL REAR NO. 1 AIR DUCT (w/ Rear Air Duct)

16. INSTALL REAR NO. 2 AIR DUCT (w/ Rear Air Duct)

17. INSTALL REAR NO. 4 AIR DUCT (w/ Rear Air Duct)

18. INSTALL REAR NO. 5 AIR DUCT (w/ Rear Air Duct)

19. INSTALL FRONT FLOOR CARPET ASSEMBLY

20. INSTALL COOLER (ROOM TEMP. SENSOR) THERMISTOR

21. INSTALL ACCELERATOR PEDAL (WITH SENSOR) ROD ASSEMBLY

Click here

22. INSTALL FRONT SEAT ASSEMBLY LH

(a) for Manual Seat:

Click here

(b) for Power Seat:

Click here

23. INSTALL FRONT SEAT ASSEMBLY RH

(a) Use the same procedure as for the LH side.

24. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY

Click here

25. INSTALL STEERING COLUMN ASSEMBLY

Click here

26. CONNECT WATER HOSE SUB-ASSEMBLY (for M20A-FXS)

*a

View A

*b

View B

*c

Marking (Purple)

*d

Marking (Yellow)

*e

Hose Clip Installation Range (120°)

*f

90°

*g

Hose Clip Installation Range (2.0 to 6.0 mm (0.0787 to 0.236 in.))

-

-

(1) Connect the water hose sub-assembly with the marking facing up and engage the hose clips within the area shown in the illustration.

NOTICE:

Do not apply excessive force to the water hose sub-assembly.

27. CONNECT INLET HEATER WATER HOSE (for 2ZR-FXE)

*a

View A

*b

Marking (Blue)

*c

Hose Clip Installation Range (120°)

*d

Hose Clip Installation Range (2.0 to 7.0 mm (0.0787 to 0.276 in.))

(1) Connect the inlet heater water hose with the marking facing up and engage the clip within the area shown in the illustration.

NOTICE:

Do not apply excessive force to the inlet heater water hose.

28. CONNECT OUTLET HEATER WATER HOSE (for 2ZR-FXE)

*a

View A

*b

Marking (Pink)

*c

Hose Clip Installation Range (120°)

*d

Hose Clip Installation Range (2.0 to 7.0 mm (0.0787 to 0.276 in.))

(1) Connect the outlet heater water hose with the marking facing up and engage the clip within the area shown in the illustration.

NOTICE:

Do not apply excessive force to the outlet heater water hose.

29. CONNECT NO. 2 DISCHARGE HOSE SUB-ASSEMBLY (for PHEV Model)

(1) Remove the vinyl tape from the No. 2 discharge hose sub-assembly, sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 2 discharge hose sub-assembly.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the O-ring to the No. 2 discharge hose sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.

(3) Connect the No. 2 discharge hose sub-assembly.

30. CONNECT DISCHARGE TUBE SUB-ASSEMBLY (for PHEV Model)

(1) Remove the vinyl tape from the discharge tube sub-assembly, sufficiently apply compressor oil to a new O-ring and the fitting surface of the discharge tube sub-assembly.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the O-ring to the discharge tube sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.

(3) Connect the discharge tube sub-assembly and rotate the hook connector as shown in the illustration.

(4) Insert the tube joint into the fitting hole securely and install the bolt.

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

31. CONNECT NO. 7 DISCHARGE TUBE (for PHEV Model)

(1) Remove the vinyl tape from the No. 7 discharge tube, sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 7 discharge tube.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the O-ring to the No. 7 discharge tube.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.

(3) Connect the No. 7 discharge tube.

32. CONNECT NO. 1 SUCTION TUBE (for PHEV Model)

(1) Remove the vinyl tape from the No. 1 suction tube, sufficiently apply compressor oil to a new O-ring and the fitting surface of the No. 1 suction tube.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the O-ring to the No. 1 suction tube.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.

(3) Connect the No. 1 suction tube and rotate the hook connector as shown in the illustration.

(4) Insert the tube joint into the fitting hole securely and install the bolt.

Torque:

5,4 N·m {55 kgf·cm, 48 in·lbf}

33. CONNECT SUCTION PIPE SUB-ASSEMBLY (for HEV Model)

(1) Remove the vinyl tape from the suction pipe sub-assembly, sufficiently apply compressor oil to 2 new O-rings and the fitting surface of the suction pipe sub-assembly.

Compressor Oil:

ND-OIL 11 or equivalent

(2) Install the 2 O-rings to the suction pipe sub-assembly.

NOTICE:

Keep the O-ring and O-ring fitting surface free of foreign matter.

(3) Connect the suction pipe sub-assembly and rotate the hook connector as shown in the illustration.

(4) Insert the tube joint into the fitting hole securely and install the bolt.

Torque:

9,8 N·m {100 kgf·cm, 87 in·lbf}

34. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

Click here

35. INSTALL WATER GUARD PLATE

36. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Click here

37. ADD ENGINE COOLANT (for Engine)

(a) for M20A-FXS:

Click here

(b) for 2ZR-FXE:

Click here

38. INSPECT FOR COOLANT LEAK (for Engine)

(a) for M20A-FXS:

Click here

(b) for 2ZR-FXE:

Click here

39. CHARGE AIR CONDITIONING SYSTEM WITH REFRIGERANT

(a) for HFC-134a (R134a):

Click here

(b) for HFO-1234yf (R1234yf):

Click here

40. WARM UP COMPRESSOR

(a) for HFC-134a (R134a):

Click here

(b) for HFO-1234yf (R1234yf):

Click here

41. INSPECT FOR REFRIGERANT LEAK

(a) for HFC-134a (R134a):

Click here

(b) for HFO-1234yf (R1234yf):

Click here