Power Seat Switch
- Removal
- Inspection
- Installation
Removal
REMOVAL
The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during front power seat switch assembly removal/installation are shown below.
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
HINT:
When the cable is disconnected / reconnected to the auxiliary battery terminal, systems temporarily stop operating. However, each system has a function that completes learning the first time the system is used.
- Learning completes when Toyota Prius vehicle is driven
Effect/Inoperative Function when Necessary Procedure not Performed
Necessary Procedure
Link
Front Camera System
Drive the Toyota Prius vehicle straight ahead at 35 km/h or more for 5 seconds or more.

- Learning completes when vehicle is operated normally
Effect/Inoperative Function when Necessary Procedure not Performed
Necessary Procedure
Link
*1: w/o Power Back Door System *2: w/ Power Back Door System
Power Door Lock Control System*1
- Back door opener
Perform door unlock operation with door control switch or electrical key transmitter sub-assembly switch.

Power Back Door System*2
Reset back door close position

Air Conditioning System
for HEV Model: - After the ignition switch is turned to ON, the servo motor standard position is recognized.
- After the ignition switch is turned to ON, the servo motor and expansion valve standard position is recognized.
-

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
PRECAUTION |
- |
- |
- |
|
2 |
FRONT SEAT ASSEMBLY |
- |
- |
- |
- |
3 |
DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER |
71074S |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
4 |
FRONT SEAT FRONT CUSHION SHIELD |
71868N |
- |
- |
|
5 |
FRONT SEAT CUSHION SHIELD |
71812D |
- |
- |
|
6 |
SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
- |
- |
- |
|
7 |
RECLINING POWER SEAT SWITCH KNOB |
- |
- |
- |
|
8 |
SEAT ADJUSTER SHIELD CLAMP BRACKET |
72714 |
- |
- |
- |
9 |
FRONT POWER SEAT SWITCH |
84922C |
- |
- |
- |
PROCEDURE
1. PRECAUTION
![]() |
NOTICE: After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal. Click here |
2. REMOVE FRONT SEAT ASSEMBLY
Click here ![]()
3. DISCONNECT SEPARATE TYPE FRONT SEATBACK COVER
Click here ![]()
4. REMOVE FRONT SEAT FRONT CUSHION SHIELD
![]() |
Click here |
5. REMOVE FRONT SEAT CUSHION SHIELD
![]() |
Click here |
6. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
![]() |
Click here |
7. REMOVE RECLINING POWER SEAT SWITCH KNOB
![]() |
Click here |
8. REMOVE SEAT ADJUSTER SHIELD CLAMP BRACKET
Click here ![]()
9. REMOVE FRONT POWER SEAT SWITCH

Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT POWER SEAT SWITCH LH (w/o Memory)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the front power seat switch LH. |
|
2. INSPECT FRONT POWER SEAT SWITCH LH (w/ Memory)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the front power seat switch LH. |
|
Installation
INSTALLATION
CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.
COMPONENTS (INSTALLATION) 
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FRONT POWER SEAT SWITCH |
84922C |
- |
- |
- |
2 |
SEAT ADJUSTER SHIELD CLAMP BRACKET |
72714 |
- |
- |
- |
3 |
RECLINING POWER SEAT SWITCH KNOB |
- |
- |
- |
- |
4 |
SLIDE AND VERTICAL POWER SEAT SWITCH KNOB |
- |
- |
- |
- |
5 |
FRONT SEAT CUSHION SHIELD |
71812D |
- |
- |
- |
6 |
FRONT SEAT FRONT CUSHION SHIELD |
71868N |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
7 |
CONNECT SEPARATE TYPE FRONT SEATBACK COVER |
71074S |
- |
- |
- |
8 |
FRONT SEAT ASSEMBLY |
- |
- |
- |
- |
PROCEDURE
1. INSTALL FRONT POWER SEAT SWITCH
2. INSTALL SEAT ADJUSTER SHIELD CLAMP BRACKET
3. INSTALL RECLINING POWER SEAT SWITCH KNOB
4. INSTALL SLIDE AND VERTICAL POWER SEAT SWITCH KNOB
5. INSTALL FRONT SEAT CUSHION SHIELD
6. INSTALL FRONT SEAT FRONT CUSHION SHIELD
7. CONNECT SEPARATE TYPE FRONT SEATBACK COVER
8. INSTALL FRONT SEAT ASSEMBLY
Click here ![]()























