Power Door Lock Control System

In this manual: Power Door Lock Control System
How To Troubleshoot Ecu Controlled Systems — 1How To Use This Manual — 1Identification Information — 1Repair Instruction — 1Terms — 12zr-fxe Air Cleaner Filter Element — 12zr-fxe Auxiliary Battery — 12zr-fxe Coolant (for Engine Coolant) — 12zr-fxe Oil And Oil Filter — 12zr-fxe Spark Plug — 1Air Conditioning Filter — 1Battery Cooling Filter — 1Brake Fluid — 1Coolant (for Inverter) — 1Front Brake Flexible Hose — 1Front Disc Brake Pad — 1Front Lower Ball Joint — 1Front Wheel Alignment — 1Front Wiper Rubber — 1General Maintenance — 1M20a-fxs Air Cleaner Filter Element — 1M20a-fxs Auxiliary Battery — 1M20a-fxs Coolant (for Engine Coolant) — 1M20a-fxs Oil And Oil Filter — 1M20a-fxs Spark Plug — 1Pa10/pb10/pb12 Hybrid Transaxle Fluid — 1Q810 Hybrid Transaxle Fluid — 1Rear Brake Flexible Hose — 1Rear Disc Brake Pad — 1Rear Wheel Alignment — 1Steering Column — 1Tire And Wheel — 1Transmitter Battery — 1When Disconnecting Or Reconnecting Battery Terminal — 1When Replacing Or Removing/installing Parts — 1Automatic High Beam Main Switch — 1Automatic High Beam System — 1Driver Monitor Camera — 1Driver Monitor Camera System — 1Driver Monitor Ecu — 1Front Camera — 1Front Camera System — 1Front Radar Sensor System — 1Front Side Radar Sensor — 1Front Side Radar Sensor System — 1Millimeter Wave Radar Sensor — 1Utility — 1Advanced Park — 1Advanced Park Main Switch — 1Amplifier Antenna — 1Audio And Visual System — 1Front Door Speaker — 1Instrument Panel Speaker — 1Microphone — 1Noise Filter — 1Pillar Speaker — 1Radio Antenna Cord (for Back Door) — 1Radio Antenna Cord (for Instrument Panel) — 1Radio Antenna Cord (for Roof) — 1Radio Receiver — 1Rear Door Speaker — 1Roof Antenna — 1Stereo Component Amplifier — 1Stereo Jack Adapter Assembly — 1Window Glass Antenna Wire — 1Back-up Battery — 1Dcm(telematics Transceiver) — 1Manual(sos)switch — 1Safety Connect System — 1Telephone And Gps Antenna (for Front Side) — 1Telephone And Gps Antenna (for Roof Side) — 1Telephone And Gps Antenna Cords — 1Garage Door Opener System (for Digital Inner Mirror) — 1Garage Door Opener System (for Ec Inner Mirror) — 1Blind Spot Monitor Sensor — 1Blind Spot Monitor System — 1Clearance Warning Ecu — 1Intuitive Parking Assist System — 1Panoramic View Monitor Switch — 1Panoramic View Monitor System — 1Parking Assist Ecu — 1Parking Assist Light — 1Parking Assist Monitor System — 1Parking Support Brake System — 1Rear View Monitor System — 1Television Camera (for Front) — 1Television Camera (for Rear) — 1Television Camera (for Side) — 1Ultrasonic Sensor (for Front) — 1Ultrasonic Sensor (for Rear) — 1Brake Actuator — 1Brake Pedal Stroke Sensor — 1Electronically Controlled Brake System — 1Front Speed Sensor — 1Rear Speed Sensor (for Awd) — 1Steering Angle Sensor — 1Brake Booster — 1Brake Fluid — 1Brake Line — 1Brake Pedal — 1Brake System — 1Electric Parking Brake Actuator — 1Electric Parking Brake Switch — 1Electric Parking Brake System — 1Forced Release — 1Front Axle Hub — 1Front Axle Hub Bolt — 1Rear Axle Carrier (for 2wd) — 1Rear Axle Carrier (for Awd) — 1Rear Axle Hub (for 2wd) — 1Rear Axle Hub (for Awd) — 1Rear Axle Hub Bolt — 1Steering Knuckle — 1Drive Shaft System — 1Front Drive Shaft Assembly — 1Rear Drive Shaft Assembly — 1Combination Switch — 1Electronic Shift Lever System — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Oil Seal — 1Hybrid Transaxle System — 1Input Shaft Oil Seal — 1Motor Cable — 1Pa10 Hybrid Vehicle Transaxle — 1Pa10 Manual Parking Lock Release — 1Pa10 Oil Cooler — 1Pb10/pb12 Hybrid Vehicle Transaxle — 1Pb10/pb12 Manual Parking Lock Release — 1Pb10/pb12 Oil Cooler — 1Shift Control Actuator — 1Shift Lever — 1Shift Lever Knob — 1Differential Side Gear Shaft — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Side Gear Oil Seal — 1Motor Cable — 1Rear Traction Motor — 1Coolant (for Engine) — 1Cooling Fan Motor — 1Cooling Fan System — 1Radiator — 1Relay — 1Thermostat — 1Water Pump — 1Canister — 1Egr Cooler — 1Egr Valve — 1Emission Control System — 1Fuel Tank Cap — 1Pcv Valve — 1Purge Valve — 1Vacuum Sensor — 1Air Fuel Ratio Sensor — 1Camshaft Oil Control Valve — 1Camshaft Position Sensor — 1Crankshaft Position Sensor — 1Ecm — 1Engine Coolant Temperature Sensor — 1Heated Oxygen Sensor — 1Ignition Coil And Spark Plug — 1Ignition System — 1Knock Sensor — 1Mass Air Flow Meter — 1Relay — 1Sfi System — 1Throttle Body — 1Camshaft — 1Cylinder Block — 1Cylinder Head — 1Cylinder Head Gasket — 1Engine — 1Engine Assembly — 1Engine Unit — 1Front Crankshaft Oil Seal — 1Rear Crankshaft Oil Seal — 1Fuel Filter — 1Fuel Injector — 1Fuel Pressure Regulator — 1Fuel Pump — 1Fuel Sender Gauge Assembly — 1Fuel System — 1Fuel Tank — 1Air Cleaner Filter Element — 1Exhaust Manifold — 1Exhaust Pipe — 1Intake Manifold — 1Intake System — 1Lubrication System — 1Oil And Oil Filter — 1Oil Pan And Oil Level Sensor — 1Oil Pressure Switch — 1Oil Pump — 1Accelerator Pedal Sensor — 1Battery Blower (for Hev Model) — 1Battery Ecu (for Hev Model) — 1Battery Ecu (for Phev Model) — 1Battery Voltage Sensor (for Phev Model) — 1Charge Cable (for Phev Model) — 1Charge Indicator (for Phev Model) — 1Charge Inlet (for Phev Model) — 1Combination Switch — 1Coolant (for Inverter) — 1Cooler (for Phev Model) — 1Electric Vehicle Charger Assembly (for Phev Model) — 1Frame Wire (for Hev Model) — 1Frame Wire (for Phev Model) — 1Heater Relay (for Phev Model) — 1Hv Battery (for Hev Model) — 1Hv Battery (for Phev Model) — 1Hv Battery Heater (for Phev Model) — 1Hv Battery Stack (for Phev Model) — 1Hv Relay Assembly (for Hev Model) — 1Hv Relay Assembly (for Phev Model) — 1Hybrid Battery System (for 2zr-fxe) — 1Hybrid Battery System (for M20a-fxs) — 1Hybrid Battery System (for Phev Model) — 1Hybrid Vehicle Control Ecu — 1Inverter With Converter (for Hev Model) — 1Motor Generator Control System (for 2zr-fxe) — 1Plug-in Charge Control System (for Phev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Service Plug Grip (for Hev Model) — 1Sub Radiator — 1Water Pump With Motor — 1Auxiliary Battery — 1Battery Current Sensor — 1Charging System — 1Solar Charging System — 1Solar Control Unit — 1Solar Roof — 1Can Communication System (for Hev Model) — 1Lin Communication System — 1Network Gateway Ecu — 1Integration Control Supply — 1Main Body Ecu — 1Power Integration System — 1Sub Battery System — 1Power Steering Ecu — 1Power Steering System — 1Heated Steering Wheel Controller — 1Heated Steering Wheel System — 1Steering Column Assembly — 1Steering Heater Switch — 1Steering Pad Switch — 1Steering System — 1Steering Wheel — 1Front Lower Ball Joint — 1Front Lower Suspension Arm (for 2zr-fxe Lh Side) — 1Front Lower Suspension Arm (for 2zr-fxe Rh Side) — 1Front Lower Suspension Arm (for M20a-fxs) — 1Front Shock Absorber — 1Front Stabilizer Bar — 1Front Suspension Member — 1Rear Coil Spring — 1Rear Lower Arm (for Awd Lh Side) — 1Rear Lower Arm (for Awd Rh Side) — 1Rear Lower Arm (for Hev Model 2wd) — 1Rear Lower Arm (for Phev Model) — 1Rear Shock Absorber — 1Rear Stabilizer Bar — 1Rear Suspension Member (for 2wd) — 1Rear Suspension Member (for Awd) — 1Rear Trailing Arm — 1Rear Upper Arm — 1Tire And Wheel System — 1Tire Repair Seal — 1Tire Pressure Warning Receiver — 1Tire Pressure Warning System — 1Tire Pressure Warning Valve — 1Acoustic Vehicle Alerting System — 1Vehicle Approaching Speaker — 1Vehicle Approaching Speaker Ecu — 1Back Door — 1Back Door Closer Ecu — 1Back Door Opener Switch — 1Back Door Support — 1Back Door Weatherstrip — 1Charge Lid Courtesy Switch — 1Charge Lid Opener Motor Assembly — 1Charge Lid Opener System — 1Charge Lid Opener Unit — 1Front Door — 1Front Door Opening Trim Weatherstrip — 1Fuel Lid Opener Motor Assembly — 1Fuel Lid Opener Switch — 1Fuel Lid Opener System — 1Hood — 1Hood Lock Control Cable Assembly — 1Power Back Door Closer Switch — 1Power Back Door Control Switch — 1Power Back Door Drive Unit — 1Power Back Door System — 1Power Back Door Touch Sensor — 1Power Back Door Warning Buzzer — 1Rear Door — 1Rear Door Opening Trim Weatherstrip — 1Reserve Lock Switch — 1Front Bumper — 1Front Door Belt Moulding — 1Front Door Window Frame Moulding — 1Front Fender — 1Front Pillar Upper Cover — 1Grille Shutter — 1Grille Shutter System — 1Name Plate — 1Quarter Garnish — 1Rear Bumper — 1Rear Door Belt Moulding — 1Rear Door Window Frame Moulding — 1Rear Wheel House Plate — 1Rocker Panel Moulding — 1Roof Drip Side Finish Moulding — 1Roof Garnish — 1Wheel Opening Moulding (for Front Side) — 1Wheel Opening Moulding (for Rear Side) — 1Windshield Outside Moulding — 1Horn — 1Horn System — 1Relay — 1Automatic Light Control Sensor — 1Back-up Light Assembly — 1Charge Lid Light — 1Front Marker Light — 1Hazard Warning Switch — 1Headlight Assembly — 1Headlight Dimmer Switch — 1Headlight Leveling Switch — 1High Mounted Stop Light Assembly — 1Illumination Light Assembly — 1License Plate Light Assembly — 1Lighting System — 1Rear Combination Light Assembly — 1Rear Light Assembly — 1Rear Side Marker Light Assembly — 1Relay — 1Side Turn Signal Light Assembly — 1Stop Light Switch — 1Switch Housing — 1Outer Mirror Switch — 1Outer Rear View Mirror — 1Outer Rear View Mirror Cover — 1Outer Rear View Mirror Glass — 1Power Mirror Control System — 1Back Door Glass — 1Front Passenger Side Power Window Switch — 1Power Window Control System — 1Power Window Master Switch — 1Power Window Regulator Motor (for Front Door) — 1Power Window Regulator Motor (for Rear Door) — 1Rear Power Window Switch — 1Relay — 1Roof Window Fix Glass — 1Window Defogger System — 1Windshield Deicer Switch — 1Windshield Deicer System — 1Windshield Glass — 1Front Wiper Motor — 1Rain Sensor — 1Relay — 1Washer Motor — 1Washer Nozzle (for Front Side) — 1Washer Nozzle (for Rear Television Camera) — 1Wiper And Washer System — 1Wiper Ecu — 1Wiper Switch — 1Back Door Lock — 1Door Control Receiver — 1Door Control Switch — 1Door Control Transmitter — 1Door Lock Release Motor (for Rear Side) — 1Door Outside Handle (for Rear Side) — 1Front Door Lock — 1Power Door Lock Control System — 1Rear Door Lock — 1Transmitter Battery — 1Wireless Door Lock Control System — 1Accumulator — 1Air Conditioning Amplifier — 1Air Conditioning Panel — 1Air Conditioning Pressure Sensor — 1Air Conditioning Unit — 1Ambient Temperature Sensor — 1Blower Unit — 1Condenser (for Hev Model) — 1Condenser (for Phev Model) — 1Discharge Temperature Sensor — 1Electric Expansion Valve (cooling) — 1Electric Expansion Valve (heating) — 1Evaporator Pipe Temperature Sensor — 1Evaporator Pressure Regulator — 1Front Blower Motor — 1Front Evaporator Front Solenoid Valve — 1Air Conditioning System (for Hev Model) — 1Front Evaporator Temperature Sensor — 1Heat Exchanger Temperature Sensor — 1Heat Pump Ecu — 1High Pressure Magnetic Valve — 1Humidity Sensor — 1Internal Condenser Temperature Sensor — 1Low Pressure Magnetic Valve — 1Refrigerant (for Hfc-134a(r134a)) — 1Refrigerant Line (for Hev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Room Temperature Sensor — 1Solar Sensor — 1Floor Carpet — 1Front Console Box — 1Instrument Panel Safety Pad — 1Roof Headlining — 1Roof Sunshade — 1Ambient Light (for Driver Side) — 1Ambient Light (for Front Passenger Side) — 1Back Door Courtesy Switch — 1Footwell Light — 1Glove Box Light — 1Lighting System — 1Luggage Compartment Room Light — 1Personal Light — 1Room Light — 1Vanity Light — 1Vanity Light Switch — 1Combination Meter — 1Meter / Gauge System — 1Trip Switch — 1Digital Inner Mirror — 1Digital Rear-view Mirror System — 1Inner Mirror Monitor Camera — 1Inner Rear View Mirror (w/o Ec Mirror) — 1Accessory Power Outlet System — 1Power Outlet Socket (for Console Box Front Side) — 1Power Outlet Socket (for Console Box Rear Side) — 1Power Outlet Socket (for Console Box) — 1Power Outlet Socket (for Luggage Compartment) — 1Power Outlet Switch — 1Wireless Charger Assembly — 1Wireless Charging System — 1Climate Control Seat System — 1Front Power Seat Control System (w/ Memory) — 1Front Power Seat Motor Assembly — 1Front Seat Assembly (for Power Seat) — 1Front Seat Cushion Heater (for Power Seat) — 1Front Seatback Heater (for Power Seat) — 1Lumbar Support Adjuster Assembly — 1Power Seat Control Ecu — 1Power Seat Switch — 1Power Seat Track Rail Assembly — 1Rear Seat Assembly — 1Rear Seat Cushion Heater — 1Rear Seat Reminder System — 1Rear Seatback Heater — 1Seat Heater Control — 1Seat Heater Switch (for Front Seat) — 1Seat Heater Switch (for Rear Side) — 1Seat Heater System — 1Seat Memory Switch — 1Child Restraint Seat Anchor Bracket — 1Front Seat Inner Belt Assembly — 1Front Seat Outer Belt Assembly — 1Occupant Detection Sensor (for Front Passenger Side) — 1Rear Center Seat Outer Belt Assembly — 1Rear Seat Inner Belt Assembly (for Rh Side) — 1Rear Seat Outer Belt Assembly — 1Seat Belt Warning System (w/ Occupant Classification System) — 1Tongue Plate Stopper — 1Airbag System — 1Center Airbag Sensor Assembly — 1Curtain Shield Airbag Assembly — 1Front Airbag Sensor — 1Front Passenger Airbag Assembly — 1Front Seat Side Airbag Assembly — 1Inspection After Collision — 1Knee Airbag Assembly — 1Occupant Classification System — 1Rear Seat Side Airbag Assembly — 1Side Airbag Sensor (for Center Pillar) — 1Side Airbag Sensor (for Front Door) — 1Spiral Cable — 1Steering Pad — 1Certification Ecu — 1Digital Key Ecu — 1Digital Key Receiver (for Front Floor) — 1Digital Key Receiver (for Outside Luggage Compartment) — 1Digital Key Receiver (for Rear Door) — 1Digital Key System — 1Electrical Key Oscillator (for Front Floor) — 1Electrical Key Oscillator (for Outside Luggage Compartment) — 1Electrical Key Oscillator (for Rear Floor) — 1Engine Hood Courtesy Switch — 1Id Code Box — 1Smart Key System (for Start Function) — 1
~46min read
  • Precaution
  • Parts Location
  • System Diagram
  • How To Proceed With Troubleshooting
  • Operation Check
  • Customize Parameters
  • Initialization
  • Problem Symptoms Table
  • Terminals Of Ecu
  • Data List / Active Test
  • Diagnostic Trouble Code Chart
  • VEHICLE CONTROL HISTORY (RoB)
  • Impact Detection Sensor Circuit Malfunction (B124300)
  • All Doors LOCK/UNLOCK Functions do not Operate Via Door Key Cylinder
  • All Doors LOCK/UNLOCK Functions do not Operate Via Door Control Switch
  • Only Back Door cannot be Opened

Precaution

PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL

NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click here

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click here

PRECAUTIONS FOR REMOVAL, INSTALLATION AND REPLACEMENT OF COMPONENTS

(a) After replacing certain components, it may be necessary to update the ECU security key.

Click here

PRECAUTIONS WHEN USING GTS

(a) When using the GTS with the ignition switch off to troubleshoot:

Connect the GTS to the Toyota Prius vehicle, and turn a door control switch of the multiplex network master switch assembly at intervals of 1.5 second intervals until communication between the GTS and vehicle begins.

PRECAUTION FOR REGISTRATION

(a) Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

Click here

PRECAUTION WHEN REPLACING AIRBAG ECU ASSEMBLY

(a) When the airbag ECU assembly is replaced, update the ECU security key.

Click here

Parts Location

PARTS LOCATION

ILLUSTRATION

*A

for Remote Connect Compatible Type

*B

w/ Door Control Switch

*1

MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

*2

POWER DISTRIBUTION BOX ASSEMBLY

- DOOR BACK FUSE

- ALL DOOR LOCK RELAY

- D DOOR UNLOCK RELAY

- L/D DOOR UNLOCK RELAY

- DOOR BACK RELAY

*3

CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

*4

AIRBAG ECU ASSEMBLY

*5

DCM (TELEMATICS TRANSCEIVER)

*6

MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

*7

DOOR CONTROL SWITCH ASSEMBLY

*8

DLC3

ILLUSTRATION

*A

w/ Power Back Door System

*B

w/o Power Back Door System

*1

FRONT DOOR LOCK WITH MOTOR ASSEMBLY RH

- DOOR LOCK MOTOR

- DOOR COURTESY SWITCH

- DOOR UNLOCK DETECTION SWITCH

*2

FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

- DOOR LOCK MOTOR

- DOOR COURTESY SWITCH

- DOOR UNLOCK DETECTION SWITCH

- DOOR KEY LOCK AND UNLOCK SWITCH

*3

REAR DOOR LOCK WITH MOTOR ASSEMBLY RH

- DOOR LOCK MOTOR

- DOOR COURTESY SWITCH

- DOOR UNLOCK DETECTION SWITCH

*4

REAR DOOR LOCK WITH MOTOR ASSEMBLY LH

- DOOR LOCK MOTOR

- DOOR COURTESY SWITCH

- DOOR UNLOCK DETECTION SWITCH

*5

REAR DOOR OUTSIDE HANDLE ASSEMBLY RH

- REAR DOOR OPEN SWITCH

*6

REAR DOOR OUTSIDE HANDLE ASSEMBLY LH

- REAR DOOR OPEN SWITCH

*7

DOOR LOCK RELEASE MOTOR ASSEMBLY RH

*8

DOOR LOCK RELEASE MOTOR ASSEMBLY LH

*9

BACK DOOR LOCK ASSEMBLY WITH COURTESY LAMP SWITCH

- DOOR LOCK MOTOR

- BACK DOOR COURTESY SWITCH

*10

MULTIPLEX NETWORK DOOR ECU

*11

BACK DOOR OPENER SWITCH ASSEMBLY

-

-

System Diagram

SYSTEM DIAGRAM

How To Proceed With Troubleshooting

HINT:

  • Use the following procedure to troubleshoot the power door lock control system.
  • *: Use the GTS.

PROCEDURE

  1. Toyota Prius Vehicle BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS CHECK

HINT:

  • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
  • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
  • The following 5 items are important points for problem analysis:

What

Toyota Prius Vehicle model, system name

When

Date, time, occurrence frequency, whether the problem occurred recently or has been occurring for a long time

Where

Whether the problem occurs at a specific location

Under what conditions?

Whether the doors were locked or unlocked, whether the ignition switch was ON, whether the hybrid Toyota Prius vehicle control system has started.

How did it happen?

Problem symptoms

NEXT
  1. READ AND SAVE Toyota Prius Vehicle CONTROL HISTORY (ROB)

NOTICE:

  • If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before vehicle control history (RoB) has been read and saved, the vehicle control history (RoB) information could be lost.
  • The Toyota Prius vehicle control history (RoB) function uses the current system time of the GTS and the time counter inside the controlling ECU to calculate the times shown in the vehicle control history (RoB). For this reason, before reading the vehicle control history (RoB), first make sure that the GTS system clock is accurately set to the current time.

(a) Read and save Toyota Prius vehicle control history (RoB) using the GTS.

Body Electrical > Main Body > Utility

Vehicle Control History (RoB)

NEXT
  1. PRE-CHECK

(a) Measure the auxiliary battery voltage with the ignition switch off.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

NEXT
  1. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Using the GTS, check for CAN communication system DTCs.

for HEV Model: Click here

for PHEV Model: Click here

Result

Proceed to

CAN DTCs are not output

A

CAN DTCs are output

B

B

GO TO CAN COMMUNICATION SYSTEM

for HEV Model: Click here

for PHEV Model: Click here

A
  1. CHECK COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

(a) Using the GTS, check for LIN communication system DTCs.

Click here

Result

Proceed to

LIN DTCs are not output

A

LIN DTCs are output

B

B

GO TO LIN COMMUNICATION SYSTEM

A
  1. CHECK FOR DTC*

(a) Check for DTCs.

Body Electrical > Main Body > Trouble Codes

Result

Proceed to

DTC is not output

A

DTC B124300 is output

B

DTC B231200 is output

C

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

C

GO TO POWER WINDOW CONTROL SYSTEM

A
  1. PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result

Proceed to

Fault is not listed in Problem Symptoms Table (Fault can be simulated)

A

Fault is not listed in Problem Symptoms Table (Fault cannot be simulated)

B

Fault is listed in Problem Symptoms Table

C

B

CHECK Toyota Prius Vehicle CONTROL HISTORY (RoB)

C

GO TO STEP 10

A
  1. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Terminals of ECU

Click here

(b) Data List / Active Test

Click here

(c) Operation Check

Click here

(d) Inspection

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END

Operation Check

OPERATION CHECK

CHECK CUSTOMIZE PARAMETERS

NOTICE:

The operation check below is based on the non-customized initial condition of the vehicle.

Click here

CHECK BASIC FUNCTIONS

(a) Check that all of the doors lock when the lock switch of the door control switch is pressed.

(b) Check that all of the doors unlock when the unlock switch of the door control switch is pressed.

(c) Check that all of the doors lock when the driver door key cylinder is turned to lock using the mechanical key.

(d) Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the mechanical key and all doors unlock when it is turned to unlock again.*1

(e) Check that all doors unlock when the driver door key cylinder is turned to unlock using the mechanical key.*2

  • *1: Customize item "Unlock Key Twice Function" is set to "Enable".
  • *2: Customize item "Unlock Key Twice Function" is set to "Disable".

CHECK THE KEY LOCK-IN PREVENTION FUNCTION

NOTICE:

In order to prevent the key from being locked in the Toyota Prius vehicle, the following inspection should be performed with the driver door window open.

(a) Turn the ignition switch to ON or ACC.

(b) With the driver door open, check that all of the doors unlock immediately after the door lock knob for the driver door is pressed.

(c) With the driver door open, check that all of the doors unlock immediately after the lock switch of the door control switch is pressed.

(d) With the driver door open, press the driver door lock knob and hold it for 2 seconds or more, then close the driver door and check that all of the doors unlock.

CHECK THE SECURITY FUNCTION OF THE DOOR LOCK CONTROL SYSTEM

(a) Close all of the doors and leave the driver door window open so that the door control switch can be operated from outside the Toyota Prius vehicle. (Step 1)

(b) Open the driver door and remove the key from the vehicle. With the door still open, lock the door using the door lock knob. Close the driver door. Then, check that the doors do not unlock when the unlock switch of the door control switch is pressed from outside the vehicle.

(c) Starting from Step 1, with the key outside the Toyota Prius vehicle, close and lock the driver door using the mechanical key. Then, check that the doors do not unlock when the unlock switch of the door control switch is pressed from outside the vehicle.

(d) Starting from Step 1, with the key outside the vehicle, close and lock the driver door using wireless key operation or entry operation. Then, check that the doors do not unlock when the unlock switch of the door control switch is pressed from outside the Toyota Prius vehicle.

HINT:

Check that the security function of the door lock control system is canceled under the following conditions:

  • The ignition switch is turned to ON.
  • The driver door is unlocked using the key.
  • The unlock switch of the door control switch is pressed after the door lock knob is unlocked manually.
  • The doors are unlocked by wireless operation.
  • The doors are unlocked by entry operation.

HINT:

The "Unlock Key Twice Function" can be customized. Make sure that this function is "Enable" before performing.

CHECK THE KEY-LINKED 2-STEP UNLOCK FUNCTION

(a) Lock all doors.

(b) Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and all of the doors unlock when it is turned to unlock again.

HINT:

The "Automatic Door Lock Setting" can be customized. Make sure that this function is "Link Shift" before performing.

CHECK THE SHIFT LINKED AUTOMATIC DOOR LOCK FUNCTION (w/ Shift Linked Automatic Door Lock Function)

(a) With the shift lever in P and the ignition switch ON, check that all doors lock automatically when the shift lever is moved to any position other than P.

HINT:

The "Automatic Door Lock Setting" can be customized. Make sure that this function is "Link Speed" before performing.

CHECK THE SPEED-SENSITIVE AUTOMATIC DOOR LOCK FUNCTION (w/ Speed-sensitive Automatic Door Lock Function)

(a) When any door is unlocked and the Toyota Prius vehicle is driven at approximately 20 km/h or more, check that all of the doors lock automatically.

HINT:

The "Automatic Door Unlock Setting" can be customized. Make sure that this function is "Link Shift" before performing.

CHECK THE SHIFT LINKED AUTOMATIC DOOR UNLOCK FUNCTION (w/ Shift Linked Automatic Door Unlock Function)

(a) With the shift lever in any position other than P and the ignition switch ON, check that all doors unlock automatically when the shift lever is moved to P.

HINT:

The "Automatic Door Unlock Setting" can be customized. Make sure that this function is "Link D-Door" before performing.

CHECK THE DRIVER DOOR-LINKED AUTOMATIC DOOR UNLOCK FUNCTION (w/ Driver Door-linked Automatic Door Unlock Function)

(a) With the driver door closed, turn the ignition switch from ON to off, open the driver door within approximately 45 seconds, and confirm that all doors automatically unlock.

CHECK POWER BACK DOOR CLOSE AND LOCK FUNCTION (w/ Power Back Door System)

Click here

CHECK ILLUMINATED ENTRY FUNCTION

Click here

Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

(a) Customizing with the GTS

(1) Connect the GTS to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the GTS on.

(4) Enter the following menus: Customize Setting / Door Lock.

(5) Select the setting by referring to the table below.

Door Lock

Tester Display

Description

Default

Setting

ECU

Unlock Key Twice Function

Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors.

Disable/Enable*5

$00:Disable,$01:Enable

Main body ECU (Multiplex network body ECU)

Automatic Door Lock Setting

  • Link Shift: Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed*1
  • Link Speed: Function that locks all of the doors when the Toyota Prius vehicle speed reaches a certain level*2

Link Shift

$00:OFF,$01:Link Shift,$02:Link Speed

Main body ECU (Multiplex network body ECU)

Automatic Door Unlock Setting

  • Link D-Door: Function that unlocks the other doors when the driver door is opened within approximately 45 seconds of the ignition switch being turned off*3
  • Link Shift: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON*4

Link Shift

$00:OFF,$01:Link D-Door,$02:Link Shift

Main body ECU (Multiplex network body ECU)

  • *1: w/ Shift Linked Automatic Door Lock Function
  • *2: w/ Speed-sensitive Automatic Door Lock Function
  • *3: w/ Driver Door-linked Automatic Door Unlock Function
  • *4: w/ Shift Linked Automatic Door Unlock Function
  • *5: Default setting differs depending on the country.

(b) Customizing with the Multi-display

(1) Turn the ignition switch to ON.

(2) Enter the following menus: Settings / Toyota Prius Vehicle customize / Door control

(3) Select the setting by referring to the table below.

Display

Description

Default

Setting

Relevant ECU

Auto lock

  • By Shift from P: Function that locks all doors when the shift lever is moved out of P, with the ignition switch ON and all doors closed*1
  • By Speed: Function that locks all of the doors when the Toyota Prius vehicle speed reaches a certain level*2

By shift from park

By speed, By shift from park or Off

Main body ECU (Multiplex network body ECU)

Auto unlock

  • By Driver Door: Function that unlocks the other doors when the driver door is opened within approximately 45 seconds of the ignition switch being turned off*3
  • By Shift to P: Function that unlocks all doors when the shift lever is moved to P from any position other than P with the ignition switch ON*4

By shift to park

By shift to park, By driver door or Off

Main body ECU (Multiplex network body ECU)

  • *1: w/ Shift Linked Automatic Door Lock Function
  • *2: w/ Speed-sensitive Automatic Door Lock Function
  • *3: w/ Driver Door-linked Automatic Door Unlock Function
  • *4: w/ Shift Linked Automatic Door Unlock Function

Initialization

INITIALIZATION

BACK DOOR LOCK

(a) When the auxiliary battery is reconnected:

If the back door is locked and therefore cannot be opened, it is necessary to unlock the back door using the door control switch or electrical key transmitter sub-assembly switch.

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Power Door Lock Control System

Symptom

Suspected Area

Link

Only driver door LOCK functions do not operate

Front door lock with motor assembly LH

Wire harness or connector

-

Power distribution box assembly

-

Only driver door UNLOCK functions do not operate

Front door lock with motor assembly LH

Wire harness or connector

-

Main body ECU (Multiplex network body ECU)

-

Power distribution box assembly

-

Only front passenger door LOCK/UNLOCK functions do not operate

Front door lock with motor assembly RH

Wire harness or connector

-

Power distribution box assembly

-

Only rear door LH LOCK/UNLOCK functions do not operate

Rear door lock with motor assembly LH

Wire harness or connector

-

Power distribution box assembly

-

Only rear door LH unlatch functions do not operate

Door lock release motor assembly LH

Rear door outside handle assembly LH (rear door open switch)

Wire harness or connector

-

Main body ECU (Multiplex network body ECU)

-

Only rear door RH LOCK/UNLOCK functions do not operate

Rear door lock with motor assembly RH

Wire harness or connector

-

Power distribution box assembly

-

Only rear door RH unlatch functions do not operate

Door lock release motor assembly RH

Rear door outside handle assembly RH (rear door open switch)

Wire harness or connector

-

Main body ECU (Multiplex network body ECU)

-

All doors LOCK/UNLOCK functions do not operate via door key cylinder

Main body ECU (Multiplex network body ECU)

Front door lock with motor assembly LH

Wire harness or connector

All doors LOCK/UNLOCK functions do not operate via master switch

LIN communication system

-

Multiplex network master switch assembly

-

Main body ECU (Multiplex network body ECU)

-

All doors LOCK/UNLOCK functions do not operate via multiplex network master switch assembly and door key cylinder

Power distribution box assembly

-

Main body ECU (Multiplex network body ECU)

-

All doors LOCK/UNLOCK functions do not operate via door control switch*3

Main body ECU (Multiplex network body ECU)

Door control switch assembly

Wire harness or connector

Power distribution box assembly

Speed-sensitive automatic door lock function does not operate (meter/gauge system operates normally)*6

CAN communication system

for HEV Model:

for PHEV Model:

Main body ECU (Multiplex network body ECU)

-

Shift-linked automatic door lock/unlock functions do not operate (hybrid transaxle system operates normally)*6

CAN communication system

for HEV Model:

for PHEV Model:

Main body ECU (Multiplex network body ECU)

-

Hybrid Toyota Prius vehicle control ECU

-

Only back door cannot be opened*4

Power Back Door System

Check customize setting (Unlock Key Twice Function "Disable")

Only back door cannot be opened*5

Back door lock with courtesy light switch assembly

Wire harness or connector

-

Power distribution box assembly

-

Main body ECU (Multiplex network body ECU)

-

Key lock-in prevention function does not operate

Front door lock with motor assembly LH

Front door lock with motor assembly RH

Rear door lock with motor assembly LH

Rear door lock with motor assembly RH

Main body ECU (Multiplex network body ECU)

-

Power distribution box assembly

-

Wire harness or connector

-

Lock operation continues even after doors have been locked*1

Front door lock with motor assembly LH

Front door lock with motor assembly RH

Rear door lock with motor assembly LH

Rear door lock with motor assembly RH

Wire harness or connector

-

Power distribution box assembly

-

Main body ECU (Multiplex network body ECU)

-

Only remote door LOCK/UNLOCK functions do not operate (power door lock operation is normally)*2

Telematics system

HINT:

  • *1: When the door unlock detection switch detects an unlock position signal after a door lock operation has been performed, a door lock operation will be performed 3 times.
  • *2: for Remote Connect Compatible Type
  • *3: w/ Door Control Switch
  • *4: w/ Power Back Door System
  • *5: w/o Power Back Door System
  • *6: w/ Automatic Door Lock/unlock Function

Terminals Of Ecu

TERMINALS OF ECU

CHECK POWER DISTRIBUTION BOX ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

(a) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.

Click here

(b) Reconnect the power distribution box assembly connectors.

(c) Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

z1-13 (GND1) - Body ground

Ground

Always

Below 1 Ω

z1-14 (GND2) - Body ground

Ground

Always

Below 1 Ω

z1-26 (BECU) - Body ground

Auxiliary battery power supply

Ignition switch off

11 to 14 V

z1-27 (IGR) - Body ground

Ignition power supply (IG signal)

Ignition switch off

Below 1 V

Ignition switch ON

11 to 14 V

(d) Install the main body ECU (multiplex network body ECU) to power distribution box assembly.

Click here

(e) Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

R17-3 (FLCY) - Body ground

Front door courtesy light switch assembly (LH) input

Front door LH open → closed

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

R17-5 (FRCY) - Body ground

Front door courtesy light switch assembly (RH) input

Front door RH open → closed

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

R17-28 (LCTY) - Body ground

Rear door courtesy light switch assembly (LH) input

Rear door LH open → closed

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

R17-1 (RCTY) - Body ground

Rear door courtesy light switch assembly (RH) input

Rear door RH open → closed

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

R17-2 (BCTY) - Body ground

Back door courtesy light switch input

Back door open → closed

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

K17-9 (LSFL) - Body ground

Front door LH unlock detection switch input

Front door LH unlocked → locked

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

K17-3 (LSFR) - Body ground

Front door RH unlock detection switch input

Front door RH unlocked → locked

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

K17-10 (LSWL) - Body ground

Rear door LH unlock detection switch input

Rear door LH unlocked → locked

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

K16-23 (LSWR) - Body ground

Rear door RH unlock detection switch input

Rear door RH unlocked → locked

Below 1 V → 11 to 14 V or pulse output (maximum 14 V)*3

R17-36 (ACT-) - Body ground

Door lock motor unlock drive output

Door control switch or driver door key cylinder off → on (unlock)

Below 1 V → 11 to 14 V → Below 1 V

R17-37 (ACT-) - Body ground

Door lock motor unlock drive output

Door control switch or driver door key cylinder off → on (unlock)

Below 1 V → 11 to 14 V → Below 1 V

R17-40 (ACT ) - Body ground

Door lock motor lock drive output

Door control switch or driver door key cylinder off → on (lock)

Below 1 V → 11 to 14 V → Below 1 V

R17-41 (ACT ) - Body ground

Door lock motor lock drive output

Door control switch or driver door key cylinder off → on (lock)

Below 1 V → 11 to 14 V → Below 1 V

K15-18 (BSR1) - Body ground

Rear door outside handle assembly RH (rear door open switch) input

Rear door outside handle assembly RH (rear door open switch) off → on

Below 1 V → 11 to 14 V → Below 1 V

K16-4 (BSR2) - Body ground

Door lock release motor assembly RH output

Rear door outside handle assembly RH (rear door open switch) off → on

Below 1 V → 11 to 14 V → Below 1 V

K15-12 (BSL1) - Body ground

Rear door outside handle assembly LH (rear door open switch) input

Rear door outside handle assembly LH (rear door open switch) off → on

Below 1 V → 11 to 14 V → Below 1 V

K16-3 (BSL2) - Body ground

Door lock release motor assembly LH output

Rear door outside handle assembly LH (rear door open switch) off → on

Below 1 V → 11 to 14 V → Below 1 V

K20-20 (ACTD) - Body ground

Door lock motor unlock drive output

Door control switch or driver door key cylinder off → on (unlock)

Below 1 V → 11 to 14 V → Below 1 V

R17-42 (TR ) - Body ground*1

Back doorlock motor unlock drive output

Back door closed → open

Below 1 V → 11 to 14 V → Below 1 V

K17-4 (UL3) - Body ground

Driver door key-linked unlock input

Driver door key cylinder in neutral position → on (unlock)

Pulse generation → Below 1 V

K17-28 (L2) - Body ground

Driver door key-linked lock input

Driver door key cylinder in neutral position → on (lock)

Pulse generation → Below 1 V

K16-6 (L1) - Body ground*2

Door control switch assembly input

Door control switch assembly off → on (lock)

Pulse generation → Below 1 V

K16-7 (UL1) - Body ground*2

Door control switch assembly input

Door control switch assembly off → on (unlock)

Pulse generation → Below 1 V

K21-43 (GSW) - Body ground

Airbag ECU signal (collision detection signal)

Ignition switch ON with airbag ECU assembly connector disconnected

4.3 to 5.5 V

  • *1: w/o Power Back Door System
  • *2: w/ Door Control Switch
  • *3: Differs depending on the Toyota Prius vehicle model

CHECK CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

(a) Disconnect the K13 certification ECU (smart key ECU assembly) connector.

(b) Measure the voltage and resistance according to the value(s) in the table below.

HINT:

Measure the values on the wire harness side with the connector disconnected.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

K13-6 ( B) - Body ground

Auxiliary battery power supply

Ignition switch off

11 to 14 V

K13-29 (E) - Body ground

Ground

Always

Below 1 Ω

(c) Reconnect the K13 certification ECU (smart key ECU assembly) connector.

(d) Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

R59-16 (TSW5) - K13-29 (E)

Back door opener switch input

Back door opener switch (open switch) off → on

Pulse generation → Below 1 V

Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the GTS to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the GTS on.

(d) Enter the following menus: Body Electrical / Main Body or Master Switch / Data List.

(e) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Manual Door Lock Switch (D/P Door)

Door control switch assembly lock signal

OFF or ON

OFF: Lock switch of door control switch assembly not pushed

ON: Lock switch of door control switch assembly pushed

w/ Door Control Switch

Door Lock Switch Status by a Mechanical Key (D/P Door)

Driver door key-linked lock / unlock switch lock signal

OFF or ON

OFF: Driver door key cylinder not turned to lock position

ON: Driver door key cylinder turned to lock position

-

Manual Door Unlock Switch (D/P Door)

Door control switch assembly unlock signal

OFF or ON

OFF: Unlock switch of door control switch assembly not pushed

ON: Unlock switch of door control switch assembly pushed

w/ Door Control Switch

Door Unlock Switch Status by a Mechanical Key (D Door)

Driver door key-linked lock / unlock switch lock signal

OFF or ON

OFF: Driver door key cylinder not turned to unlock position

ON: Driver door key cylinder turned to unlock position

-

FR Door Lock Position Switch Status

Front door RH unlock detection switch signal

Lock or Unlock

Lock: Front door RH locked

Unlock: Front door RH Unlocked

-

FL Door Lock Position Switch Status

Front door LH unlock detection switch signal

Lock or Unlock

Lock: Front door LH locked

Unlock: Front door LH Unlocked

-

RR Door Lock Position Switch Status

Rear door RH unlock detection switch signal

Lock or Unlock

Lock: Rear door RH locked

Unlock: Rear door RH Unlocked

-

RL Door Lock Position Switch Status

Rear door LH unlock detection switch signal

Lock or Unlock

Lock: Rear door LH locked

Unlock: Rear door LH Unlocked

-

Back Door Lock Position Status

Back door lock signal

Lock or Unlock

Lock: Back door locked

Unlock: Back door unlocked

-

FR Door Courtesy Switch Status

Front door courtesy light switch (RH) signal

Close or Open

Close: Front door RH closed

Open: Front door RH open

-

FL Door Courtesy Switch Status

Front door courtesy light switch (LH) signal

Close or Open

Close: Front door LH closed

Open: Front door LH open

-

RR Door Courtesy Switch Status

Rear door courtesy light switch (RH) signal

Close or Open

Close: Rear door RH closed

Open: Rear door RH open

-

RL Door Courtesy Switch Status

Rear door courtesy light switch (LH) signal

Close or Open

Close: Rear door LH closed

Open: Rear door LH open

-

Back Door Courtesy Switch Status

Back door courtesy light switch signal

Close or Open

Close: Back door closed

Open: Back door open

-

RR Door Opener Switch

Rear door open switch RH signal

OFF or ON

OFF: Rear door open switch RH not pushed

ON: Rear door open switch RH pushed

-

RL Door Opener Switch

Rear door open switch LH signal

OFF or ON

OFF: Rear door open switch LH not pushed

ON: Rear door open switch LH pushed

-

IGR Power

Ignition switch ON signal

OFF or ON

OFF: Ignition switch off or ACC

ON: Ignition switch ON

-

Unlock Key Twice Function

Key-linked 2-step unlock function

OFF or ON

Customize setting displayed

-

Automatic Door Lock Setting

Automatic door lock function

OFF, Link Shift or Link Speed

Customize setting displayed

w/ Automatic Door Lock Function

Automatic Door Unlock Setting

Automatic door unlock function

OFF, Link D-Door or Link Shift

Customize setting displayed

w/ Automatic Door Unlock Function

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the GTS to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the GTS on.

(d) Enter the following menus: Body Electrical / Main Body / Active Test.

(e) Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Door Lock

Door lock motor

OFF/ON

-

Door Unlock

Door lock motor

OFF/ON

-

D-Door Unlock

Driver door lock motor

OFF/ON

-

Collision Door Lock Release

Operate door lock motor

OFF/ON

-

Trunk Lid / Back Door Open

Back door lock motor

OFF/ON

w/o Power Back Door System

Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

Power Door Lock Control System

DTC No.

Detection Item

DTC Output from

Priority

Link

B124300

Impact Detection Sensor Circuit Malfunction

Main Body

A

VEHICLE CONTROL HISTORY (RoB)

VEHICLE CONTROL HISTORY (RoB)

NOTICE:

  • If the vehicle or vehicle controls are operated (for example, during initial inspection when the vehicle is brought in for repair) before vehicle control history has been read out and saved, the vehicle control history information could be lost.
  • The function "Toyota Prius Vehicle Control History (RoB)" uses the current system time setting inside the GTS and the time counter inside the controlling ECU to calculate the timings shown in the vehicle control history. For this reason, before reading out the vehicle control history, first make sure that the GTS system clock is accurately set to the current time.
  • The time counter in the control ECU may deviate by up to /- 10% due to the characteristics of the time counter.
  • The time counter in the control ECU is reset approximately 34 days before the "Current" value due to the characteristics of the time counter. Therefore, the time information stored before the 34th day may not be accurately displayed.

Toyota Prius Vehicle Control History (RoB)

(a) Read the Vehicle Control History (RoB) according to the display on the GTS.

Body Electrical > Main Body > Utility

Toyota Prius Vehicle Control History (RoB)

Code

Item

Item Description

Note

X2300

Door Lock/Unlock

Stores the reason for a door lock/unlock operation that occurred

When doors are locked or unlocked, this stores the method by which operation was performed.

X2301

Automatic Door Lock Inoperative

Stores the reason for auto lock non-operation when collision sensor detection or malfunction occurs

Stores the reason for the automatic door lock function becoming inoperative when a collision is detected.

X2302

Automatic Door Lock Switching

Stores setting value when auto lock/unlock (speed/shift/door open) setting changes

Stores operating history for auto lock switching. For Toyota Prius vehicles with navigation system, stores switching by navigation system; for vehicles without navigation system, stores switching due to shift information and manual lock/unlock switch operation.

HINT:

Some items are not displayed depending on the type of vehicle.

According to the display on the GTS, read and save the operation history.

Item List

Manual Lock

Door Lock (Voice)

Door Key Linked Lock

Wireless Lock

Wireless Auto Lock (30s)

Wireless Double Lock Set

Auto Entry Lock

Auto Entry Double Lock Set

Auto Entry Lock (30s)

Auto Lock by remote parking

Power Back Door Lock signal by Back Door Control Switch

Walk Away PBD Close & Lock

RH PSD Close & Lock

LH PSD Close & Lock

Security Forced Lock

Shift Linked Auto Lock

Auto Lock Switch Answerback Lock

Door Lock by Active Test

Remote Door Lock

Door Lock by Pre A/C

Automatics Relock (Remote)

Manual Unlock

Door Unlock (Voice)

D-Seat Key Linked Unlock (Twice)

Door Key Linked Unlock

Wireless Unlock (Twice)

Wireless Unlock

Auto Entry Unlock

Auto Entry Preparation Unlock

Unlock by kick Sensor Input

Key in Toyota Prius Vehicle Detected Unlock

Unlock by Emblem Sensor Input

Key Detected Unlock 1

Key Detected Unlock 2

Key Detected Unlock 3

Urgent Stop Support Unlock

Shift Linked Auto Unlock

Door Open/Close Linked Auto Unlock

Shock Detection Unlock

Door Unlock by Active Test

Auto Lock Switch Answerback Unlock

Remote Door Unlock

One Motion PBD Open/Stop judgment during the closing operation

One Motion PSD Open/Stop judgment during the closing operation

Fail Safe Unset

Shock Sensor Malfunction

Shock Sensor Detected

Changed the Automatics Door Lock Setting

Changed the Shift Linked Automatic Door Lock Setting

Changed the Automatic Door Unlock Setting When D-Door Open

Changed the Shift Linked Automatic Door Unlock Setting

(b) Following the instructions on the screen, save the Toyota Prius vehicle control history.

HINT:

Some items are not displayed depending on the type of vehicle.

Symptom Simulation

Click here

Impact Detection Sensor Circuit Malfunction (B124300)

DESCRIPTION

If the collision door lock release function does not operate normally, or an open or short in the GSW input circuit of the main body ECU (multiplex network body ECU) is detected, DTC B124300 will be stored.

HINT:

If DTC B124300 is stored, the automatic door lock function, and collision door lock release function will be prohibited.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

Priority

B124300

Impact Detection Sensor Circuit Malfunction

A malfunction occurs in the GSW input circuit of the main body ECU (multiplex network body ECU).

  • Main body ECU (multiplex network body ECU)
  • Power distribution box assembly
  • Airbag ECU assembly
  • Wire harness or connector

Main Body

A

WIRING DIAGRAM

NOTICE:

  • When DTC B124300 is stored, operation of the speed-sensitive automatic door lock function*1, shift linked automatic door lock function*2 and collision door lock release is prohibited.
  • After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) auxiliary battery terminal notices before proceeding with work.

    Click here

  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

    Click here

    • *1: w/ Speed-sensitive Automatic Door Lock Function

      *2: w/ Shift Linked Automatic Door Lock Function

PROCEDURE

  1. CLEAR DTC

(a) Clear the DTCs.

Body Electrical > Main Body > Clear DTCs
NEXT
  1. CHECK DTC OUTPUT

(a) Recheck for DTCs.

Body Electrical > Main Body > Trouble Codes
Result

Proceed to

B124300 is not output

A

B124300 is output

B

A

USE SIMULATION METHOD TO CHECK

B
  1. CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (GSW VOLTAGE)

Pre-procedure1

(a) Disconnect the cable from the negative (-) auxiliary battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

NOTICE:

Turning the ignition switch to ON with the airbag ECU assembly connector disconnected causes other DTCs to be stored. Clear the DTCs after performing this inspection.

(b) Disconnect the K1 airbag ECU assembly connector.

(c) Connect the cable to the negative (-) auxiliary battery terminal.

Post-procedure1

(d) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(K1) Click Connector(K1)

Tester Connection

Condition

Specified Condition

Result

K1-25 (GSW) - Body ground

Ignition switch ON

4.3 to 5.5 V

V

Result:

Proceed to

OK

NG

*a

Front view of wire harness connector

(to Airbag ECU Assembly)

Procedure1

(e) None

NG

GO TO STEP 7

OK
  1. REPLACE AIR BAG ECU ASSEMBLY

Pre-procedure1

(a) Disconnect the cable from the negative (-) auxiliary battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

Procedure1

(b) Replace the airbag ECU assembly.

HINT:

Click here

Post-procedure1

(c) None

NEXT
  1. CLEAR DTC

(a) Clear the DTCs.

Body Electrical > Main Body > Clear DTCs
NEXT
  1. CHECK DTC OUTPUT

(a) Recheck for DTCs.

Body Electrical > Main Body > Trouble Codes
Result

Proceed to

B124300 is not output

A

B124300 is output

B

A

END (AIRBAG ECU ASSEMBLY WAS DEFECTIVE)

B

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

  1. CHECK HARNESS AND CONNECTOR (AIRBAG ECU ASSEMBLY - POWER DISTRIBUTION BOX ASSEMBLY)

Pre-procedure1

(a) Disconnect the cable from the negative (-) auxiliary battery terminal.

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to disable the SRS system.

(b) Disconnect the K21 power distribution box assembly connector.

Procedure1

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(K1,K21) Click Connector(K1) Click Connector(K21)

Tester Connection

Condition

Specified Condition

K1-25 (GSW) - K21-43

Always

Below 1 Ω

K1-25 (GSW) or K21-43 - Other terminals and body ground

Always

10 kΩ or higher

Post-procedure1

(d) None

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. INSPECT POWER DISTRIBUTION BOX ASSEMBLY

Pre-procedure1

(a) Remove the power distribution box assembly.

HINT:

Click here

(b) Remove the main body ECU (multiplex network body ECU).

*a

Component without harness connected

(Power Distribution Box Assembly)

-

-

Procedure1

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(z1,K21) Click Connector(z1) Click Connector(K21)

Tester Connection

Condition

Specified Condition

z1-20 (GSW) - K21-43

Always

Below 1 Ω

Post-procedure1

(d) None

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPLACE POWER DISTRIBUTION BOX ASSEMBLY

All Doors LOCK/UNLOCK Functions do not Operate Via Door Key Cylinder

DESCRIPTION

The main body ECU (multiplex network body ECU) receives driver door key cylinder lock or unlock switch signals from the front door lock with motor assembly. The main body ECU (multiplex network body ECU) activates the door lock motor on each door according to these signals.

WIRING DIAGRAM

NOTICE:

Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

Click here

PROCEDURE

  1. READ VALUE USING GTS

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Door Lock Switch Status by a Mechanical Key (D/P Door)

Driver door key-linked lock / unlock switch lock signal

OFF or ON

OFF: Driver door key cylinder not turned to lock position

ON: Driver door key cylinder turned to lock position

-

Door Unlock Switch Status by a Mechanical Key (D Door)

Driver door key-linked lock / unlock switch lock signal

OFF or ON

OFF: Driver door key cylinder not turned to unlock position

ON: Driver door key cylinder turned to unlock position

-

Body Electrical > Main Body > Data List

Tester Display

Door Lock Switch Status by a Mechanical Key (D/P Door)

Door Unlock Switch Status by a Mechanical Key (D Door)

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG
  1. INSPECT FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

Click here

NG

REPLACE FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH

OK
  1. CHECK HARNESS AND CONNECTOR (FRONT DOOR LOCK WITH MOTOR ASSEMBLY LH - MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND BODY GROUND)

(a) Disconnect the K17 main body ECU (multiplex network body ECU) connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(O2,K17) Click Connector(O2) Click Connector(K17)

Tester Connection

Condition

Specified Condition

O2-7 (L) - K17-28 (L2)

Always

Below 1 Ω

O2-6 (UL) - K17-4 (UL3)

Always

Below 1 Ω

O2-10 (E) - Body ground

Always

Below 1 Ω

O2-7 (L) or K17-28 (L2) - Other terminals and body ground

Always

10 kΩ or higher

O2-6 (UL) or K17-4 (UL3) - Other terminals and body ground

Always

10 kΩ or higher

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

All Doors LOCK/UNLOCK Functions do not Operate Via Door Control Switch

DESCRIPTION

The main body ECU (multiplex network body ECU) receives switch signals from the door control switch assembly and activates the door lock motor on each door according to these signals.

WIRING DIAGRAM

NOTICE:

Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

Click here

PROCEDURE

  1. READ VALUE USING GTS

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Manual Door Lock Switch (D/P Door)

Door control switch assembly lock signal

OFF or ON

OFF: Lock switch of door control switch assembly not pushed

ON: Lock switch of door control switch assembly pushed

-

Manual Door Unlock Switch (D/P Door)

Door control switch assembly unlock signal

OFF or ON

OFF: Unlock switch of door control switch assembly not pushed

ON: Unlock switch of door control switch assembly pushed

-

Body Electrical > Main Body > Data List

Tester Display

Manual Door Lock Switch (D/P Door)

Manual Door Unlock Switch (D/P Door)

OK:

The GTS indicates ON or OFF according to the switch operation shown in the table.

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG
  1. INSPECT DOOR CONTROL SWITCH ASSEMBLY

Click here

NG

REPLACE DOOR CONTROL SWITCH ASSEMBLY

OK
  1. CHECK HARNESS AND CONNECTOR (DOOR CONTROL SWITCH ASSEMBLY - MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND BODY GROUND)

(a) Disconnect the K16 main body ECU (multiplex network body ECU) connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(N10,K16) Click Connector(N10) Click Connector(K16)

Tester Connection

Condition

Specified Condition

N10-2 (UL) - K16-7 (UL1)

Always

Below 1 Ω

N10-4 (L) - K16-6 (L1)

Always

Below 1 Ω

N10-5 (E) - Body ground

Always

Below 1 Ω

N10-2 (UL) or K16-7 (UL1) - Other terminals and body ground

Always

10 kΩ or higher

N10-4 (L) or K16-6 (L1) - Other terminals and body ground

Always

10 kΩ or higher

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

Only Back Door cannot be Opened

DESCRIPTION

The main body ECU (multiplex network body ECU) receives signals from the back door opener switch assembly. Then, the main body ECU (multiplex network body ECU) activates the back door lock motor.

WIRING DIAGRAM

NOTICE:

  • When using the GTS with the Toyota Prius vehicle ignition switch off, connect the GTS to the DLC3 and turn a door control switch of the multiplex network master switch assembly at intervals of 1.5 seconds or less until communication between the GTS and the vehicle begins.
  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • The power door lock control system uses the CAN communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power door lock control system after confirming that the communication systems are functioning properly.

    Click here

  • If the main body ECU (multiplex network body ECU) is replaced, refer to registration.

    Click here

PROCEDURE

  1. PERFORM ACTIVE TEST USING GTS (Trunk Lid / Back Door Open)

(a) Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Trunk Lid / Back Door Open

Back door lock motor

OFF or ON

-

Body Electrical > Main Body > Active Test

Trunk Lid / Back Door Open

OK:

The back door lock with courtesy light switch assembly unlatches when ON is selected.

OK

GO TO SMART KEY SYSTEM (for Entry Function)

NG
  1. INSPECT BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY

Click here

NG

REPLACE BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY

OK
  1. CHECK HARNESS AND CONNECTOR (BACK DOOR LOCK WITH COURTESY LIGHT SWITCH ASSEMBLY - POWER DISTRIBUTION BOX ASSEMBLY AND BODY GROUND)

(a) Disconnect the W20 back door lock with courtesy light switch assembly connector.

(b) Disconnect the R17 power distribution box assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(W20,R17) Click Connector(W20) Click Connector(R17)

Tester Connection

Condition

Specified Condition

W20-1 (ACT ) - R17-42

Always

Below 1 Ω

W20-3 (D ) - R17-2

Always

Below 1 Ω

W20-2 (ACT-) - Body ground

Always

Below 1 Ω

W20-1 (ACT ) or R17-42 - Other terminals and body ground

Always

10 kΩ or higher

W20-3 (D ) or R17-2 - Other terminals and body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. INSPECT POWER DISTRIBUTION BOX ASSEMBLY

(a) Remove the power distribution box assembly.

Click here

(b) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.

Click here

(c) Measure the resistance according to the value(s) in the table below.

*a

Component without harness connected

(Power Distribution Box Assembly)

-

-

Standard Resistance:

Click Location & Routing(z1,R17) Click Connector(z1) Click Connector(R17)

Tester Connection

Condition

Specified Condition

z1-19 (BCTY) - R17-2

Always

Below 1 Ω

Click here

NG

REPLACE POWER DISTRIBUTION BOX ASSEMBLY

OK
  1. CHECK HARNESS AND CONNECTOR (POWER DISTRIBUTION BOX ASSEMBLY - AUXILIARY BATTERY AND BODY GROUND)

(a) Disconnect the power distribution box assembly connectors.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(A15) Click Connector(A15)

Tester Connection

Condition

Specified Condition

A15-1 - Body ground

Always

11 to 14 V

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(K20,K21) Click Connector(K20) Click Connector(K21)

Tester Connection

Condition

Specified Condition

K20-36 - Body ground

Always

Below 1 Ω

K21-41 - Body ground

Always

Below 1 Ω

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK POWER DISTRIBUTION BOX ASSEMBLY (DOOR BACK RELAY)

(a) Remove the power distribution box assembly.

Click here

(b) Remove the main body ECU (multiplex network body ECU) from the power distribution box assembly.

Click here

(c) Measure the resistance according to the value(s) in the table below.

*a

Component without harness connected

(Power Distribution Box Assembly)

-

-

Standard Resistance:

Click Location & Routing(R17) Click Connector(R17)

Tester Connection

Condition

Specified Condition

R17-42 - Body ground

Auxiliary battery voltage applied to terminals A15-1 and z1-5 (TR )

10 kΩ or higher

R17-42 - Body ground

Auxiliary battery voltage not applied to terminals A15-1 and z1-5 (TR )

Below 1 Ω

(d) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(R17) Click Connector(R17)

Tester Connection

Condition

Specified Condition

R17-42 - Auxiliary battery negative (-) terminal

Auxiliary battery voltage applied to terminals A15-1 and z1-5 (TR )

11 to 14 V

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPLACE POWER DISTRIBUTION BOX ASSEMBLY