Power Mirror Control System

In this manual: Power Mirror Control System
How To Troubleshoot Ecu Controlled Systems — 1How To Use This Manual — 1Identification Information — 1Repair Instruction — 1Terms — 12zr-fxe Air Cleaner Filter Element — 12zr-fxe Auxiliary Battery — 12zr-fxe Coolant (for Engine Coolant) — 12zr-fxe Oil And Oil Filter — 12zr-fxe Spark Plug — 1Air Conditioning Filter — 1Battery Cooling Filter — 1Brake Fluid — 1Coolant (for Inverter) — 1Front Brake Flexible Hose — 1Front Disc Brake Pad — 1Front Lower Ball Joint — 1Front Wheel Alignment — 1Front Wiper Rubber — 1General Maintenance — 1M20a-fxs Air Cleaner Filter Element — 1M20a-fxs Auxiliary Battery — 1M20a-fxs Coolant (for Engine Coolant) — 1M20a-fxs Oil And Oil Filter — 1M20a-fxs Spark Plug — 1Pa10/pb10/pb12 Hybrid Transaxle Fluid — 1Q810 Hybrid Transaxle Fluid — 1Rear Brake Flexible Hose — 1Rear Disc Brake Pad — 1Rear Wheel Alignment — 1Steering Column — 1Tire And Wheel — 1Transmitter Battery — 1When Disconnecting Or Reconnecting Battery Terminal — 1When Replacing Or Removing/installing Parts — 1Automatic High Beam Main Switch — 1Automatic High Beam System — 1Driver Monitor Camera — 1Driver Monitor Camera System — 1Driver Monitor Ecu — 1Front Camera — 1Front Camera System — 1Front Radar Sensor System — 1Front Side Radar Sensor — 1Front Side Radar Sensor System — 1Millimeter Wave Radar Sensor — 1Utility — 1Advanced Park — 1Advanced Park Main Switch — 1Amplifier Antenna — 1Audio And Visual System — 1Front Door Speaker — 1Instrument Panel Speaker — 1Microphone — 1Noise Filter — 1Pillar Speaker — 1Radio Antenna Cord (for Back Door) — 1Radio Antenna Cord (for Instrument Panel) — 1Radio Antenna Cord (for Roof) — 1Radio Receiver — 1Rear Door Speaker — 1Roof Antenna — 1Stereo Component Amplifier — 1Stereo Jack Adapter Assembly — 1Window Glass Antenna Wire — 1Back-up Battery — 1Dcm(telematics Transceiver) — 1Manual(sos)switch — 1Safety Connect System — 1Telephone And Gps Antenna (for Front Side) — 1Telephone And Gps Antenna (for Roof Side) — 1Telephone And Gps Antenna Cords — 1Garage Door Opener System (for Digital Inner Mirror) — 1Garage Door Opener System (for Ec Inner Mirror) — 1Blind Spot Monitor Sensor — 1Blind Spot Monitor System — 1Clearance Warning Ecu — 1Intuitive Parking Assist System — 1Panoramic View Monitor Switch — 1Panoramic View Monitor System — 1Parking Assist Ecu — 1Parking Assist Light — 1Parking Assist Monitor System — 1Parking Support Brake System — 1Rear View Monitor System — 1Television Camera (for Front) — 1Television Camera (for Rear) — 1Television Camera (for Side) — 1Ultrasonic Sensor (for Front) — 1Ultrasonic Sensor (for Rear) — 1Brake Actuator — 1Brake Pedal Stroke Sensor — 1Electronically Controlled Brake System — 1Front Speed Sensor — 1Rear Speed Sensor (for Awd) — 1Steering Angle Sensor — 1Brake Booster — 1Brake Fluid — 1Brake Line — 1Brake Pedal — 1Brake System — 1Electric Parking Brake Actuator — 1Electric Parking Brake Switch — 1Electric Parking Brake System — 1Forced Release — 1Front Axle Hub — 1Front Axle Hub Bolt — 1Rear Axle Carrier (for 2wd) — 1Rear Axle Carrier (for Awd) — 1Rear Axle Hub (for 2wd) — 1Rear Axle Hub (for Awd) — 1Rear Axle Hub Bolt — 1Steering Knuckle — 1Drive Shaft System — 1Front Drive Shaft Assembly — 1Rear Drive Shaft Assembly — 1Combination Switch — 1Electronic Shift Lever System — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Oil Seal — 1Hybrid Transaxle System — 1Input Shaft Oil Seal — 1Motor Cable — 1Pa10 Hybrid Vehicle Transaxle — 1Pa10 Manual Parking Lock Release — 1Pa10 Oil Cooler — 1Pb10/pb12 Hybrid Vehicle Transaxle — 1Pb10/pb12 Manual Parking Lock Release — 1Pb10/pb12 Oil Cooler — 1Shift Control Actuator — 1Shift Lever — 1Shift Lever Knob — 1Differential Side Gear Shaft — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Side Gear Oil Seal — 1Motor Cable — 1Rear Traction Motor — 1Coolant (for Engine) — 1Cooling Fan Motor — 1Cooling Fan System — 1Radiator — 1Relay — 1Thermostat — 1Water Pump — 1Canister — 1Egr Cooler — 1Egr Valve — 1Emission Control System — 1Fuel Tank Cap — 1Pcv Valve — 1Purge Valve — 1Vacuum Sensor — 1Air Fuel Ratio Sensor — 1Camshaft Oil Control Valve — 1Camshaft Position Sensor — 1Crankshaft Position Sensor — 1Ecm — 1Engine Coolant Temperature Sensor — 1Heated Oxygen Sensor — 1Ignition Coil And Spark Plug — 1Ignition System — 1Knock Sensor — 1Mass Air Flow Meter — 1Relay — 1Sfi System — 1Throttle Body — 1Camshaft — 1Cylinder Block — 1Cylinder Head — 1Cylinder Head Gasket — 1Engine — 1Engine Assembly — 1Engine Unit — 1Front Crankshaft Oil Seal — 1Rear Crankshaft Oil Seal — 1Fuel Filter — 1Fuel Injector — 1Fuel Pressure Regulator — 1Fuel Pump — 1Fuel Sender Gauge Assembly — 1Fuel System — 1Fuel Tank — 1Air Cleaner Filter Element — 1Exhaust Manifold — 1Exhaust Pipe — 1Intake Manifold — 1Intake System — 1Lubrication System — 1Oil And Oil Filter — 1Oil Pan And Oil Level Sensor — 1Oil Pressure Switch — 1Oil Pump — 1Accelerator Pedal Sensor — 1Battery Blower (for Hev Model) — 1Battery Ecu (for Hev Model) — 1Battery Ecu (for Phev Model) — 1Battery Voltage Sensor (for Phev Model) — 1Charge Cable (for Phev Model) — 1Charge Indicator (for Phev Model) — 1Charge Inlet (for Phev Model) — 1Combination Switch — 1Coolant (for Inverter) — 1Cooler (for Phev Model) — 1Electric Vehicle Charger Assembly (for Phev Model) — 1Frame Wire (for Hev Model) — 1Frame Wire (for Phev Model) — 1Heater Relay (for Phev Model) — 1Hv Battery (for Hev Model) — 1Hv Battery (for Phev Model) — 1Hv Battery Heater (for Phev Model) — 1Hv Battery Stack (for Phev Model) — 1Hv Relay Assembly (for Hev Model) — 1Hv Relay Assembly (for Phev Model) — 1Hybrid Battery System (for 2zr-fxe) — 1Hybrid Battery System (for M20a-fxs) — 1Hybrid Battery System (for Phev Model) — 1Hybrid Vehicle Control Ecu — 1Inverter With Converter (for Hev Model) — 1Motor Generator Control System (for 2zr-fxe) — 1Plug-in Charge Control System (for Phev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Service Plug Grip (for Hev Model) — 1Sub Radiator — 1Water Pump With Motor — 1Auxiliary Battery — 1Battery Current Sensor — 1Charging System — 1Solar Charging System — 1Solar Control Unit — 1Solar Roof — 1Can Communication System (for Hev Model) — 1Lin Communication System — 1Network Gateway Ecu — 1Integration Control Supply — 1Main Body Ecu — 1Power Integration System — 1Sub Battery System — 1Power Steering Ecu — 1Power Steering System — 1Heated Steering Wheel Controller — 1Heated Steering Wheel System — 1Steering Column Assembly — 1Steering Heater Switch — 1Steering Pad Switch — 1Steering System — 1Steering Wheel — 1Front Lower Ball Joint — 1Front Lower Suspension Arm (for 2zr-fxe Lh Side) — 1Front Lower Suspension Arm (for 2zr-fxe Rh Side) — 1Front Lower Suspension Arm (for M20a-fxs) — 1Front Shock Absorber — 1Front Stabilizer Bar — 1Front Suspension Member — 1Rear Coil Spring — 1Rear Lower Arm (for Awd Lh Side) — 1Rear Lower Arm (for Awd Rh Side) — 1Rear Lower Arm (for Hev Model 2wd) — 1Rear Lower Arm (for Phev Model) — 1Rear Shock Absorber — 1Rear Stabilizer Bar — 1Rear Suspension Member (for 2wd) — 1Rear Suspension Member (for Awd) — 1Rear Trailing Arm — 1Rear Upper Arm — 1Tire And Wheel System — 1Tire Repair Seal — 1Tire Pressure Warning Receiver — 1Tire Pressure Warning System — 1Tire Pressure Warning Valve — 1Acoustic Vehicle Alerting System — 1Vehicle Approaching Speaker — 1Vehicle Approaching Speaker Ecu — 1Back Door — 1Back Door Closer Ecu — 1Back Door Opener Switch — 1Back Door Support — 1Back Door Weatherstrip — 1Charge Lid Courtesy Switch — 1Charge Lid Opener Motor Assembly — 1Charge Lid Opener System — 1Charge Lid Opener Unit — 1Front Door — 1Front Door Opening Trim Weatherstrip — 1Fuel Lid Opener Motor Assembly — 1Fuel Lid Opener Switch — 1Fuel Lid Opener System — 1Hood — 1Hood Lock Control Cable Assembly — 1Power Back Door Closer Switch — 1Power Back Door Control Switch — 1Power Back Door Drive Unit — 1Power Back Door System — 1Power Back Door Touch Sensor — 1Power Back Door Warning Buzzer — 1Rear Door — 1Rear Door Opening Trim Weatherstrip — 1Reserve Lock Switch — 1Front Bumper — 1Front Door Belt Moulding — 1Front Door Window Frame Moulding — 1Front Fender — 1Front Pillar Upper Cover — 1Grille Shutter — 1Grille Shutter System — 1Name Plate — 1Quarter Garnish — 1Rear Bumper — 1Rear Door Belt Moulding — 1Rear Door Window Frame Moulding — 1Rear Wheel House Plate — 1Rocker Panel Moulding — 1Roof Drip Side Finish Moulding — 1Roof Garnish — 1Wheel Opening Moulding (for Front Side) — 1Wheel Opening Moulding (for Rear Side) — 1Windshield Outside Moulding — 1Horn — 1Horn System — 1Relay — 1Automatic Light Control Sensor — 1Back-up Light Assembly — 1Charge Lid Light — 1Front Marker Light — 1Hazard Warning Switch — 1Headlight Assembly — 1Headlight Dimmer Switch — 1Headlight Leveling Switch — 1High Mounted Stop Light Assembly — 1Illumination Light Assembly — 1License Plate Light Assembly — 1Lighting System — 1Rear Combination Light Assembly — 1Rear Light Assembly — 1Rear Side Marker Light Assembly — 1Relay — 1Side Turn Signal Light Assembly — 1Stop Light Switch — 1Switch Housing — 1Outer Mirror Switch — 1Outer Rear View Mirror — 1Outer Rear View Mirror Cover — 1Outer Rear View Mirror Glass — 1Power Mirror Control System — 1Back Door Glass — 1Front Passenger Side Power Window Switch — 1Power Window Control System — 1Power Window Master Switch — 1Power Window Regulator Motor (for Front Door) — 1Power Window Regulator Motor (for Rear Door) — 1Rear Power Window Switch — 1Relay — 1Roof Window Fix Glass — 1Window Defogger System — 1Windshield Deicer Switch — 1Windshield Deicer System — 1Windshield Glass — 1Front Wiper Motor — 1Rain Sensor — 1Relay — 1Washer Motor — 1Washer Nozzle (for Front Side) — 1Washer Nozzle (for Rear Television Camera) — 1Wiper And Washer System — 1Wiper Ecu — 1Wiper Switch — 1Back Door Lock — 1Door Control Receiver — 1Door Control Switch — 1Door Control Transmitter — 1Door Lock Release Motor (for Rear Side) — 1Door Outside Handle (for Rear Side) — 1Front Door Lock — 1Power Door Lock Control System — 1Rear Door Lock — 1Transmitter Battery — 1Wireless Door Lock Control System — 1Accumulator — 1Air Conditioning Amplifier — 1Air Conditioning Panel — 1Air Conditioning Pressure Sensor — 1Air Conditioning Unit — 1Ambient Temperature Sensor — 1Blower Unit — 1Condenser (for Hev Model) — 1Condenser (for Phev Model) — 1Discharge Temperature Sensor — 1Electric Expansion Valve (cooling) — 1Electric Expansion Valve (heating) — 1Evaporator Pipe Temperature Sensor — 1Evaporator Pressure Regulator — 1Front Blower Motor — 1Front Evaporator Front Solenoid Valve — 1Air Conditioning System (for Hev Model) — 1Front Evaporator Temperature Sensor — 1Heat Exchanger Temperature Sensor — 1Heat Pump Ecu — 1High Pressure Magnetic Valve — 1Humidity Sensor — 1Internal Condenser Temperature Sensor — 1Low Pressure Magnetic Valve — 1Refrigerant (for Hfc-134a(r134a)) — 1Refrigerant Line (for Hev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Room Temperature Sensor — 1Solar Sensor — 1Floor Carpet — 1Front Console Box — 1Instrument Panel Safety Pad — 1Roof Headlining — 1Roof Sunshade — 1Ambient Light (for Driver Side) — 1Ambient Light (for Front Passenger Side) — 1Back Door Courtesy Switch — 1Footwell Light — 1Glove Box Light — 1Lighting System — 1Luggage Compartment Room Light — 1Personal Light — 1Room Light — 1Vanity Light — 1Vanity Light Switch — 1Combination Meter — 1Meter / Gauge System — 1Trip Switch — 1Digital Inner Mirror — 1Digital Rear-view Mirror System — 1Inner Mirror Monitor Camera — 1Inner Rear View Mirror (w/o Ec Mirror) — 1Accessory Power Outlet System — 1Power Outlet Socket (for Console Box Front Side) — 1Power Outlet Socket (for Console Box Rear Side) — 1Power Outlet Socket (for Console Box) — 1Power Outlet Socket (for Luggage Compartment) — 1Power Outlet Switch — 1Wireless Charger Assembly — 1Wireless Charging System — 1Climate Control Seat System — 1Front Power Seat Control System (w/ Memory) — 1Front Power Seat Motor Assembly — 1Front Seat Assembly (for Power Seat) — 1Front Seat Cushion Heater (for Power Seat) — 1Front Seatback Heater (for Power Seat) — 1Lumbar Support Adjuster Assembly — 1Power Seat Control Ecu — 1Power Seat Switch — 1Power Seat Track Rail Assembly — 1Rear Seat Assembly — 1Rear Seat Cushion Heater — 1Rear Seat Reminder System — 1Rear Seatback Heater — 1Seat Heater Control — 1Seat Heater Switch (for Front Seat) — 1Seat Heater Switch (for Rear Side) — 1Seat Heater System — 1Seat Memory Switch — 1Child Restraint Seat Anchor Bracket — 1Front Seat Inner Belt Assembly — 1Front Seat Outer Belt Assembly — 1Occupant Detection Sensor (for Front Passenger Side) — 1Rear Center Seat Outer Belt Assembly — 1Rear Seat Inner Belt Assembly (for Rh Side) — 1Rear Seat Outer Belt Assembly — 1Seat Belt Warning System (w/ Occupant Classification System) — 1Tongue Plate Stopper — 1Airbag System — 1Center Airbag Sensor Assembly — 1Curtain Shield Airbag Assembly — 1Front Airbag Sensor — 1Front Passenger Airbag Assembly — 1Front Seat Side Airbag Assembly — 1Inspection After Collision — 1Knee Airbag Assembly — 1Occupant Classification System — 1Rear Seat Side Airbag Assembly — 1Side Airbag Sensor (for Center Pillar) — 1Side Airbag Sensor (for Front Door) — 1Spiral Cable — 1Steering Pad — 1Certification Ecu — 1Digital Key Ecu — 1Digital Key Receiver (for Front Floor) — 1Digital Key Receiver (for Outside Luggage Compartment) — 1Digital Key Receiver (for Rear Door) — 1Digital Key System — 1Electrical Key Oscillator (for Front Floor) — 1Electrical Key Oscillator (for Outside Luggage Compartment) — 1Electrical Key Oscillator (for Rear Floor) — 1Engine Hood Courtesy Switch — 1Id Code Box — 1Smart Key System (for Start Function) — 1
~27min read
  • Precaution
  • Parts Location
  • System Diagram
  • System Description
  • How To Proceed With Troubleshooting
  • Operation Check
  • Customize Parameters
  • Problem Symptoms Table
  • Terminals Of Ecu
  • Data List / Active Test
  • Mirror Heater does not Operate with Rear Defogger Switch
  • AUTO Power Retract Mirrors do not operate

Precaution

PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE (-) AUXILIARY BATTERY TERMINAL

NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click here

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click here

PRECAUTIONS FOR REMOVAL, INSTALLATION AND REPLACEMENT OF COMPONENTS

(a) After replacing certain components, it may be necessary to update the ECU security key.

Click here

Parts Location

PARTS LOCATION

ILLUSTRATION

*1

OUTER REAR VIEW MIRROR ASSEMBLY RH

*2

OUTER MIRROR RH

*3

OUTER REAR VIEW MIRROR ASSEMBLY LH

*4

OUTER MIRROR LH

*5

OUTER MIRROR RETRACTOR RH

*6

OUTER MIRROR RETRACTOR LH

*7

NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY

- INP STD NO. 1 FUSE

-

-

ILLUSTRATION

*1

AIR CONDITIONING AMPLIFIER ASSEMBLY

*2

MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

*3

POWER DISTRIBUTION BOX ASSEMBLY

- MIR RLY RELAY

- MIR RLY- RELAY

- MIR HTR RELAY

*4

MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

- MIRROR SELECT/ADJUST SWITCH

- MIRROR FOLD/RETRACT SWITCH (w/ Auto Power Retract Mirror Function)

*5

REAR DEFOGGER SWITCH (AIR CONDITIONING CONTROL ASSEMBLY)

- MIRROR HEATER SWITCH

*6

DLC3

System Diagram

SYSTEM DIAGRAM

ELECTRICAL REMOTE CONTROL MIRROR FUNCTION

MIRROR HEATER FUNCTION (w/ Mirror Heater)

System Description

SYSTEM DESCRIPTION

POWER MIRROR CONTROL SYSTEM DESCRIPTION

(a) This system has the following functions: electrical remote control mirror function, power retract mirror function, auto power retract mirror function and mirror heater function.

FUNCTION OF MAIN COMPONENT

Component

Function

Outer rear view mirror assembly LH/RH

Vertical mirror motor

Receives signals from the multiplex network master switch assembly (outer mirror switch) and adjusts the mirror surface position vertically.

Horizontal mirror motor

Receives signals from the multiplex network master switch assembly (outer mirror switch) and adjusts the mirror surface position horizontally.

Mirror heater

When the mirror heater switch (rear window defogger switch) on the air conditioning control assembly is operated, the air conditioning amplifier assembly detects the switch operation via LIN communication. The air conditioning amplifier assembly sends the operation signal to the main body ECU (multiplex network body ECU) via CAN communication and the main body ECU (multiplex network body ECU) turns on the MIR HTR relay to operate the mirror heater.

Outer Mirror Retractor LH/RH

Power retract mirror motor

Receives a signal from multiplex network master switch assembly (outer mirror switch), and retracts and returns the outer rear view mirror assemblies.

Multiplex network master switch assembly (outer mirror switch)

Mirror select switch

Consists of individual R and L switches. One must be selected to operate the mirror adjust switch.

Mirror adjust switch

After selecting the R or L switch, the right, left, up and down control switches can be operated to change the angle of the mirror surface.

Retractable outer mirror switch

Built into the multiplex network master switch assembly (outer mirror switch) and sends the retractable outer mirror switch signal to the main body ECU (multiplex network body ECU).

SYSTEM OPERATION

(a) The power mirror control system has the following features:

Function

Outline

Electrical remote control mirror function

When the multiplex network master switch assembly (outer mirror switch) is operated, this function moves the mirror surface vertically or horizontally to enable the driver to attain an optimal mirror angle. Turning the mirror select switch to the R position operates the right side mirror, and turning the mirror adjust switch to the L position operates the left side mirror.

Power retract mirror function

Retracts and returns the outer rear view mirror assemblies when the retractable outer mirror switch is operated.

Auto power retract mirror function

Retracts and returns each outer rear view mirror assembly together with the following operations while the retractable outer mirror switch is in auto retract position.

  • Manual lock/unlock
  • Key-linked lock/unlock
  • Wireless door lock/unlock
  • Wireless 60 seconds auto lock
  • Entry lock/unlock
  • Smart 60 seconds auto lock

Mirror heater function

Turns on the mirror heaters when the rear window defogger is turned on. The rear window defogger and mirror heaters automatically turn off 15 minutes after the rear window defogger and mirror heaters were activated.

How To Proceed With Troubleshooting

HINT:

  • Use the following procedure to troubleshoot the power mirror control system.
  • *: Use the GTS.

PROCEDURE

  1. Toyota Prius Vehicle BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

HINT:

  • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
  • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
  • The following 5 items are important points for problem analysis:

    What

    Toyota Prius Vehicle model, system name

    When

    Date, time, occurrence frequency

    Where

    Road conditions

    Under what conditions?

    Driving conditions, weather conditions

    How did it happen?

    Problem symptoms

NEXT
  1. PRE-CHECK

(a) Measure the auxiliary battery voltage with the ignition switch off.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

NEXT
  1. INSPECT COMMUNICATION FUNCTION OF CXPI COMMUNICATION SYSTEM*

(a) Using the GTS, check for CXPI communication system DTCs.

Click here

Result

Proceed to

CXPI DTCs are not output

A

CXPI DTCs are output

B

B

GO TO CXPI COMMUNICATION SYSTEM

A
  1. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*

(a) Using the GTS, check for CAN communication system DTCs.

for HEV Model: Click here

for PHEV Model: Click here

Result

Proceed to

CAN DTCs are not output

A

CAN DTCs are output

B

B

GO TO CAN COMMUNICATION SYSTEM

for HEV Model: Click here

for PHEV Model: Click here

A
  1. INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*

(a) Using the GTS, check for LIN communication system DTCs.

Click here

Result

Proceed to

LIN DTCs are not output

A

LIN DTCs are output

B

B

GO TO LIN COMMUNICATION SYSTEM

A
  1. PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result

Proceed to

Fault is not listed in Problem Symptoms Table

A

Fault is listed in Problem Symptoms Table

B

B

GO TO STEP 9

A
  1. OVERALL ANALYSIS AND TROUBLESHOOTING*

(a) Operation Check

Click here

(b) Terminals of ECU

Click here

(c) Data List / Active Test

Click here

(d) Inspection

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END

Operation Check

OPERATION CHECK

CHECK ELECTRICAL REMOTE CONTROL MIRROR FUNCTION

(a) Turn the ignition switch to ON.

(b) With L on the mirror select and mirror adjust switch selected, check that the outer rear view mirror assembly LH surface moves up, down, left and right normally.

(c) With R on the mirror select and mirror adjust switch selected, check that the outer rear view mirror assembly RH surface moves up, down, left and right normally.

CHECK POWER RETRACT MIRROR FUNCTION (w/ Power Retract Mirror Function)

(a) Turn the ignition switch to ON.

(b) At each outer rear view mirror assembly position, check the retractable mirror operation when operating the retractable outer mirror switch.

(1) Move both outer rear view mirror assemblies to the driving position.

(2) Press the retractable outer mirror switch.

(3) Check that the right and left outer rear view mirror assemblies move from the driving position to the retracted position.

(4) Move both outer rear view mirror assemblies to the driving position.

(5) Move one of the outer rear view mirror assemblies to the forward position by hand.

(6) Press the retractable outer mirror switch.

(7) Check that the outer rear view mirror assembly in the forward position moves to the retracted position, and check that the other mirror moves to the retracted position.

(8) Move the outer rear view mirror assemblies to the driving position.

(9) Move one of the outer rear view mirror assemblies to the retracted position by hand.

(10) Press the retractable outer mirror switch.

(11) Check that the outer rear view mirror assembly in the driving position moves to the retracted position.

(12) Move both outer rear view mirror assemblies to the retracted position.

(13) Press the retractable outer mirror switch.

(14) Check that both outer rear view mirror assemblies move from the retracted position to the driving position.

(15) Move both outer rear view mirror assemblies to the retracted position.

(16) Move one of the outer rear view mirror assemblies to the driving position by hand.

(17) Press the retractable outer mirror switch.

(18) Check that the retracted outer rear view mirror assembly moves to the driving position.

(c) Check the operation of the outer rear view mirror assemblies according to retractable outer mirror switch operations and ignition switch condition.

(1) When the outer rear view mirror assemblies are operating, turn the ignition switch off and check that the mirror operation stops immediately.

(2) Turn the ignition switch to ON and press the retractable outer mirror switch. Check that the outer rear view mirror assemblies operate in the opposite direction.

(d) Check the operation of the outer rear view mirror assembly when it is blocked by an obstacle.

(1) When an outer rear view mirror assembly is moving to the retracted or driving position, block it by hand. Check that stops moving.

(2) With the outer rear view mirror assembly stopped partway, push the retractable outer mirror switch. Check that the outer rear view mirror assembly moves in the opposite direction.

CHECK AUTO POWER RETRACT MIRROR FUNCTION (w/ Auto Power Retract Mirror Function)

HINT:

Perform the inspection with the customization function set to the default setting.

Click here

(a) When the ignition switch is off, the return/retract switch (multiplex network master switch assembly) is in the AUTO position, and a smart operation or wireless operation that changes the doors from locked to unlocked is performed, check that the left and right outer rear view mirror assemblies operate from the retracted position to the returned position.

(b) When the ignition switch is off, the return/retract switch (multiplex network master switch assembly) is in the AUTO position, and a smart operation or wireless operation that changes the doors from unlocked to locked is performed, check that the left and right outer rear view mirror assemblies operate from the returned position to the retracted position.

CHECK MIRROR HEATER FUNCTION

(a) Turn the ignition switch to ON.

(b) Check that pressing the mirror heater switch (rear window defogger switch) illuminates the indicator and warms the mirror surfaces.

(c) Check that after approximately 15 minutes, the indicator light turns off and the mirror heaters deactivate.

Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE POWER MIRROR CONTROL SYSTEM

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Record the current settings before customizing.

HINT:

The following items can be customized.

(a) Customizing with the GTS

(1) Connect the GTS to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the GTS on.

(4) Enter the following menus: Customize Setting / Others.

(5) Select the setting by referring to the table below.

Others

Tester Display

Description

Default

Setting

ECU

Automatic Mirror Fold Setting

Function that changes the condition under which the outer mirrors automatically retract

Door Lock

$01:ACC,$02:Door Lock,$03:Disable

Main body ECU (Multiplex network body ECU)

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

NOTICE:

If the auxiliary battery voltage becomes low, auxiliary battery load control will operate in order to ensure sufficient power is supplied to the power steering system. In this case, the window defogger system may not operate.

HINT:

  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Power Mirror Control System

Symptom

Suspected Area

Link

Electrical remote control mirror does not operate

Multiplex network master switch assembly (outer mirror switch)

Outer rear view mirror assembly LH

Outer rear view mirror assembly RH

Outer mirror retractor LH

Outer mirror retractor RH

Wire harness or connector

-

Mirror heater does not operate*

Proceed to "Mirror Heater does not Operate with Rear Defogger Switch"

Window defogger and mirror heater do not operate*

Proceed to "Toyota Prius Vehicle Control History (RoB)" of Power Steering System

Power retract mirrors do not operate with power retract mirror switch

Proceed to "Power Retract Mirrors do not Operate with Power Retract Mirror Switch"

Auto power retract mirrors do not operate

Proceed to "AUTO Power Retract Mirrors do not operate"

  • *: w/ Mirror Hater

Terminals Of Ecu

TERMINALS OF ECU

CHECK MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND POWER DISTRIBUTION BOX ASSEMBLY

(a) Disconnect the power distribution box assembly and main body ECU (multiplex network body ECU) connectors.

Click here

(b) Reconnect the power distribution box assembly connectors.

(c) Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

z1-13 (GND1) - Body ground

Ground

Always

Below 1 Ω

z1-14 (GND2) - Body ground

Ground

Always

Below 1 Ω

z1-26 (BECU) - Body ground

Auxiliary battery power supply

Ignition switch off

11 to 14 V

z1-27 (IGR) - Body ground

Ignition power supply (IG signal)

Ignition switch ON

11 to 14 V

Ignition switch off

Below 1 V

(d) Install the main body ECU (multiplex network body ECU) to power distribution box assembly.

Click here

(e) Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

K16-26 (RTR) - Body ground

Power retract mirror motor drive voltage (Input)

Retractable outer mirror switch on multiplex network master switch assembly (outer mirror switch) in auto retract position.

Below 1 V

Retractable outer mirror switch on multiplex network master switch assembly (outer mirror switch) not in auto retract position.

11 to 14 V

K16-27 (RET) - Body ground

Power retract mirror motor drive voltage (Input)

Retractable outer mirror switch on multiplex network master switch assembly (outer mirror switch) in retract position.

Below 1 V

Retractable outer mirror switch on multiplex network master switch assembly (outer mirror switch) not in retract position.

11 to 14 V

K20-2 - Body ground*

Mirror heater drive voltage (Output)

  • Ignition switch ON
  • Rear defogger switch off

Below 1 V

  • Ignition switch ON
  • Rear defogger switch on

11 to 14 V

K21-10 - Body ground

Power retract mirror motor drive voltage (Output)

Outer rear view mirror assembly moving to driving position.

11 to 14 V

Outer rear view mirror assembly not moving.

Below 1 V

K21-24 - Body ground

Power retract mirror motor drive voltage (Output)

Outer rear view mirror assembly moving to retract position.

11 to 14 V

Outer rear view mirror assembly not moving.

Below 1 V

  • *: w/ Mirror Heater

CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY

Click here

AIR CONDITIONING CONTROL ASSEMBLY

Click here

Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

HINT:

Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

(a) Connect the GTS to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the GTS on.

(d) Enter the following menus: Body Electrical / Main Body or Power Distribution Box / Data List.

(e) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Outer Mirror Return Switch

Retractable outer mirror switch signal

OFF or ON

OFF: Retractable outer mirror switch off

ON: Retractable outer mirror switch on

-

Outer Mirror Fold Switch

Retractable outer mirror switch signal

OFF or ON

OFF: Retractable outer mirror switch not in retract position

ON: Retractable outer mirror switch in retract position

-

Mirror Selection Switch (R)

Mirror select switch signal for RH mirror

OFF or ON

OFF: Mirror select switch off

ON: Mirror select switch R switch on

-

Mirror Selection Switch (L)

Mirror select switch signal for LH mirror

OFF or ON

OFF: Mirror select switch off

ON: Mirror select switch L switch on

-

Mirror Position Switch (R)

Mirror adjust switch signal (Right)

OFF or ON

OFF: Mirror adjust switch not pressed right

ON: Mirror adjust switch pressed right

-

Mirror Position Switch (L)

Mirror adjust switch signal (Left)

OFF or ON

OFF: Mirror adjust switch not pressed left

ON: Mirror adjust switch pressed left

-

Mirror Position Switch (UP)

Mirror adjust switch signal (Up)

OFF or ON

OFF: Mirror adjust switch not pressed up

ON: Mirror adjust switch pressed up

-

Mirror Position Switch (DOWN)

Mirror adjust switch signal (Down)

OFF or ON

OFF: Mirror adjust switch not pressed down

ON: Mirror adjust switch pressed down

-

Outer Mirror Fold Switch

Retractable outer mirror switch signal

OFF or ON

OFF: Retractable outer mirror switch off

ON: Retractable outer mirror switch on

-

Auto Mirror Switch

Auto retractable outer mirror switch signal

OFF or ON

OFF: Auto retractable outer mirror switch off

ON: Auto retractable outer mirror switch on

-

Mirror Selection Switch (R) Failure

Mirror select switch RH stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

Mirror Selection Switch (L) Failure

Mirror selection switch LH stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

Mirror Position Switch (R) Failure

Mirror position switch (Right) stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

Mirror Position Switch (L) Failure

Mirror position switch (Left) stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

Mirror Position Switch (UP) Failure

Mirror position switch (Up) stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

Mirror Position Switch (DOWN) Failure

Mirror position switch (Down) stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

Outer Mirror Fold Switch Failure

Outer mirror fold switch stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

Auto Mirror Switch Failure

Auto mirror switch stuck

OFF or ON

OFF: Switch stuck is detected

ON: Switch stuck is not detected

-

ON Menu Switch Failure

-

-

-

Cannot be used

Body Electrical > Power Distribution Box > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Mirror Heater Input Signal

Mirror heater drive signal (Input)

OFF or ON

OFF: Ignition switch ON, rear defogger switch off

ON: Ignition switch ON, rear defogger switch on

w/ Mirror Heater

Mirror Heater Output Signal

Mirror heater drive signal (Output)

OFF or ON

OFF: Ignition switch ON, rear defogger switch off

ON: Ignition switch ON, rear defogger switch on

w/ Mirror Heater

Mirror Heater Output Current

Mirror heater output current

0 to 255.0 A

Mirror heater operating: 2.8 to 3.4 A

w/ Mirror Heater

Mirror Heater Fuse Shut Off Status

Mirror heater output current shut off status

OFF or ON

OFF: Normal state

ON: Current shut off state

w/ Mirror Heater

Mirror Heater Fuse Shut Off Count

Mirror heater output current shut off count

0 to 255

0

w/ Mirror Heater

Power Retract Mirror Input Signal

Power retract mirror drive signal (Input)

Stop, Retract or Return

Stop: Outer mirror switch not being operated

Retract: Outer mirror switch in retract position

Return: Outer mirror switch in driving position

-

Power Retract Mirror Output Signal

Power retract mirror drive signal (Output)

Stop, Retract or Return

Stop: Outer rear view mirror assembly not moving

Retract: Outer rear view mirror assembly moves to the retract position

Return: Outer rear view mirror assembly moves to the driving position

-

Power Retract Mirror Output Current

Power retract mirror output current

0 to 255.0 A

Power retract mirror operating: 1.6 to 2.0 A

-

Power Retract Mirror Fuse Shut Off Status

Power retract mirror output current shut off status

OFF or ON

OFF: Normal state

ON: Current shut off state

-

Power Retract Mirror Fuse Shut Off Count

Power retract mirror output current shut off count

0 to 255

0

-

ACTIVE TEST

HINT:

Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Connect the GTS to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the GTS on.

(d) Enter the following menus: Body Electrical / Main Body or Air Conditioner / Active Test.

(e) Perform the Active Test according to the display on the GTS.

Body Electrical > Main Body > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Mirror Fold Signal

Retract mirror operation

OFF or ON

-

Mirror Return Signal

Retract mirror operation

OFF or ON

-

Body Electrical > Air Conditioner > Active Test

Tester Display

Measurement Item

Control Range

Diagnostic Note

Rear Defogger Relay

Mirror Heater

OFF or ON

w/ Mirror Heater

Mirror Heater does not Operate with Rear Defogger Switch

DESCRIPTION

  • When the mirror heater switch (rear window defogger switch) is operated, the MIR HTR relay drive request signal is sent to the air conditioning amplifier assembly and then to main body ECU (multiplex network body ECU) via CAN communication. When the main body ECU (multiplex network body ECU) receives the MIR HTR relay drive request signal, it sends a mirror heater operation signal to the power distribution box assembly.

    Based on this signal, the power distribution box assembly operates the mirror heaters.

WIRING DIAGRAM

NOTICE:

  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • The power mirror control system uses the CAN communication system, LIN communication system and CXPI communication system. Inspect the communication function by following How to Proceed with Troubleshooting. Troubleshoot the power mirror control system after confirming that the communication system is functioning properly.

    Click here

PROCEDURE

  1. CHECK Toyota Prius Vehicle CONDITION

(a) Check vehicle condition.

Result

Proceed to

Both mirror heaters do not operate

A

LH side mirror heater does not operate

B

RH side mirror heater does not operate

C

B

GO TO STEP 7

C

GO TO STEP 9

A
  1. CHECK WINDOW DEFOGGER SYSTEM

(a) Check the window defogger system operation.

Click here

OK:

The window defogger system operates normally.

NG

GO TO WINDOW DEFOGGER SYSTEM

OK
  1. CHECK HARNESS AND CONNECTOR (POWER DISTRIBUTION BOX ASSEMBLY - POWER SOURCE)

(a) Disconnect the A14 power distribution box assembly connector.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(A14) Click Connector(A14)

Tester Connection

Condition

Specified Condition

A14-1 - Body Ground

Ignition switch off

11 to 14 V

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK HARNESS AND CONNECTOR (OUTER MIRROR RETRACTOR LH/RH - POWER DISTRIBUTION BOX ASSEMBLY AND BODY GROUND)

(a) Disconnect the O9 outer mirror retractor LH connector.

(b) Disconnect the N9 outer mirror retractor RH connector.

(c) Disconnect the K20 power distribution box assembly connector.

(d) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(O9,K20,N9) Click Connector(O9) Click Connector(K20) Click Connector(N9)

Tester Connection

Condition

Specified Condition

O9-7 ( ) - K20-2

Always

Below 1 Ω

O9-9 (E) - Body ground

Always

Below 1 Ω

N9-7 ( ) - K20-2

Always

Below 1 Ω

N9-9 (E) - Body ground

Always

Below 1 Ω

O9-7 ( ), N9-7 ( ) or K20-2 - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. INSPECT OUTER MIRROR RETRACTOR LH

Click here

NG

GO TO STEP 8

OK
  1. INSPECT OUTER MIRROR RETRACTOR RH

Click here

OK

REPLACE POWER DISTRIBUTION BOX ASSEMBLY

NG

GO TO STEP 10

  1. CHECK HARNESS AND CONNECTOR (OUTER MIRROR RETRACTOR LH - POWER DISTRIBUTION BOX ASSEMBLY AND BODY GROUND)

(a) Disconnect the O9 outer mirror retractor LH connector.

(b) Disconnect the K20 power distribution box assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(O9,K20) Click Connector(O9) Click Connector(K20)

Tester Connection

Condition

Specified Condition

O9-7 ( ) - K20-2

Always

Below 1 Ω

O9-9 (E) - Body Ground

Always

Below 1 Ω

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. INSPECT OUTER MIRROR LH

Click here

OK

REPLACE OUTER MIRROR RETRACTOR LH

NG

REPLACE OUTER MIRROR LH

  1. CHECK HARNESS AND CONNECTOR (OUTER MIRROR RETRACTOR RH - POWER DISTRIBUTION BOX ASSEMBLY AND BODY GROUND)

(a) Disconnect the N9 outer mirror retractor RH connector.

(b) Disconnect the K20 power distribution box assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(N9,K20) Click Connector(N9) Click Connector(K20)

Tester Connection

Condition

Specified Condition

N9-7 ( ) - K20-2

Always

Below 1 Ω

N9-9 (E) - Body Ground

Always

Below 1 Ω

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. INSPECT OUTER MIRROR RH

Click here

OK

REPLACE OUTER MIRROR RETRACTOR RH

NG

REPLACE OUTER MIRROR RH

AUTO Power Retract Mirrors do not operate

DESCRIPTION

The multiplex network master switch assembly (outer mirror switch) sends a mirror auto retract/return signal to the main body ECU (multiplex network body ECU) when the retractable outer mirror switch on the multiplex network master switch assembly (outer mirror switch) is in the auto retract position. The main body ECU (multiplex network body ECU) retracts or returns the outer rear view mirror assemblies based on the lock/unlock signal of each door while the ignition switch is off.

WIRING DIAGRAM

Click here

NOTICE:

  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • If the main body ECU (multiplex network body ECU) is replaced, refer to registration.

    Click here

PROCEDURE

  1. CHECK POWER RETRACT MIRROR FUNCTION

(a) Check the power retract mirror function.

Click here

OK:

Power retract mirror function operates normally.

NG

GO TO OTHER DIAGNOSIS PROCEDURE (Power Retractable Mirrors do not Operate with Power Retract Mirror Switch)

OK
  1. CHECK POWER DOOR LOCK CONTROL SYSTEM

(a) Check the power door lock control system.

Click here

OK:

Power door lock control system is normal.

NG

GO TO POWER DOOR LOCK CONTROL SYSTEM

OK
  1. CHECK WIRELESS DOOR LOCK CONTROL SYSTEM

(a) Check the wireless door lock control system.

Click here

OK:

Wireless door lock control system is normal.

NG

GO TO WIRELESS DOOR LOCK CONTROL SYSTEM

OK
  1. CHECK SMART KEY SYSTEM (for Entry Function)

(a) Check the smart key system (for Entry Function).

Click here

OK:

Smart key system (for Entry Function) is normal.

NG

GO TO SMART KEY SYSTEM (for Entry Function)

OK
  1. READ VALUE USING GTS (OUTER MIRROR AUTO SWITCH)

(a) Read the Data List according to the display on the GTS.

Body Electrical > Main Body > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Outer Mirror Auto Switch

Retractable outer mirror switch signal

OFF or ON

OFF: Retractable outer mirror switch not in auto retract position

ON: Retractable outer mirror switch in auto retract position

-

Body Electrical > Main Body > Data List

Outer Mirror Auto Switch

OK:

On the GTS screen, ON or OFF is displayed accordingly.

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG
  1. INSPECT MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

Click here

NG

REPLACE MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY

OK
  1. CHECK HARNESS AND CONNECTOR (MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (OUTER MIRROR SWITCH) - MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) AND BODY GROUND)

(a) Disconnect the K16 main body ECU (multiplex network body ECU).

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(O13,K16) Click Connector(O13) Click Connector(K16)

Tester Connection

Condition

Specified Condition

O13-9 (MF) - K16-27 (RET)

Always

Below 1 Ω

O13-10 (MR) - K16-26 (RTR)

Always

Below 1 Ω

O13-9 (MF) or K16-27 (RET) - Body ground

Always

10 kΩ or higher

O13-10 (MR) or K16-26 (RTR) - Body ground

Always

10 kΩ or higher

OK

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR