Illumination Light Assembly
Removal
REMOVAL
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during LED illumination light removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/ReplacedReplaced Part or Performed Procedure | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
| *1: Even when not replacing the part, it is necessary to perform the specified necessary procedures after installation. | |||
Front bumper assembly*1 |
Front television camera view adjustment |
Panoramic View Monitor System |
|
Advanced Park |
|||
Replacement or removal and installation of 2 or more parts:
|
Television camera view adjustment |
Panoramic View Monitor System |
|
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FRONT BUMPER ASSEMBLY |
- |
- |
- |
- |
2 |
LED ILLUMINATION LIGHT |
8122A |
- |
- |
- |
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here ![]()
2. REMOVE LED ILLUMINATION LIGHT

Inspection
INSPECTION
PROCEDURE
1. INSPECT LED ILLUMINATION LIGHT LH
(a) Illumination Inspection
(1) Apply auxiliary battery voltage to the LED illumination light LH and check that the light illuminates. OK:
If the result is not as specified, replace the LED illumination light LH. |
|
2. INSPECT LED ILLUMINATION LIGHT RH
(a) Illumination Inspection
(1) Apply auxiliary battery voltage to the LED illumination light RH and check that the light illuminates. OK:
If the result is not as specified, replace the LED illumination light RH. |
|
Installation
INSTALLATION
HINT:
- Use the same procedure for the RH side and LH side.
- The following procedure is for the LH side.

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
LED ILLUMINATION LIGHT |
8122A |
- |
- |
- |
2 |
FRONT BUMPER ASSEMBLY |
- |
- |
- |
- |
PROCEDURE
1. INSTALL LED ILLUMINATION LIGHT
2. INSTALL FRONT BUMPER ASSEMBLY
Click here ![]()










