Acoustic Vehicle Alerting System
- Precaution
- Parts Location
- System Diagram
- System Description
- How To Proceed With Troubleshooting
- Operation Check
- Problem Symptoms Table
- Terminals Of Ecu
- Data List / Active Test
- Diagnostic Trouble Code Chart
- Acoustic Vehicle Alerting Speaker Circuit Open (B135013,B135019)
- Lost Communication With Brake System Control Module Missing Message (U012987,U014087,U029387)
- Software Incompatibility with Body Control Module Invalid/Incompatible Software Component (U032257)
- There is No Sound Made
Precaution
PRECAUTION
PRECAUTIONS FOR DISCONNECTING AND RECONNECTING CABLE TO NEGATIVE (-) AUXILIARY BATTERY TERMINAL
NOTICE:
- After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here

HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click here

PRECAUTIONS FOR ACOUSTIC Toyota Prius Vehicle ALERTING SYSTEM
(a) In the following cases, the volume or tone of the sound might change:
(1) If the vehicle is parked in a very hot or cold environment for an extended period of time (function will return to normal after time passes)
(2) If high pressure water is applied directly to the speaker from the bottom of the Toyota Prius vehicle
(3) If the front of the speaker is blocked by mud, snow, ice, etc.
(4) If the entire speaker freezes
(b) In the following cases, it may be difficult to hear the sound from the speaker:
(1) If the environment around the vehicle is very noisy (in a busy intersection or when an emergency Toyota Prius vehicle is approaching)
(2) If the listener is behind the vehicle. (Compared to a situation such as when a pedestrian is in front of the vehicle, the sound volume will seem to be lower when the car is reversing. This occurs because the speaker is installed facing the front of the vehicle.)
Parts Location
PARTS LOCATION
ILLUSTRATION

*1 |
Toyota Prius Vehicle APPROACHING SPEAKER ASSEMBLY |
*2 |
NO. 2 SKID CONTROL ECU (BRAKE ACTUATOR ASSEMBLY) |
*3 |
NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY - ECU-B FUSE |
- |
- |
ILLUSTRATION

*1 |
Toyota Prius Vehicle APPROACHING SPEAKER CONTROLLER |
*2 |
HYBRID VEHICLE CONTROL ECU |
*3 |
MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
*4 |
COMBINATION METER ASSEMBLY |
System Diagram
SYSTEM DIAGRAM

System Description
SYSTEM DESCRIPTION
ACOUSTIC VEHICLE ALERTING SYSTEM
(a) When the vehicle is being driven quietly using the motor only, the acoustic vehicle alerting system outputs a warning sound from the vehicle approaching speaker assembly to inform pedestrians, cyclists etc., of the approach of the Toyota Prius vehicle.
(b) The warning sound is output by the vehicle approaching speaker assembly at a volume level that will not be perceived as noise. Also the pitch of the sound changes in accordance with vehicle speed so that the sound reflects vehicle deceleration and acceleration.
(c) Acoustic vehicle alerting system operation automatically stops when the shift lever is in P, the engine starts or the Toyota Prius vehicle is driven at 35 km/h or more.
How To Proceed With Troubleshooting
HINT:
- Use the following procedure to troubleshoot the acoustic vehicle alerting system.
- *: Use the GTS.
PROCEDURE
Toyota Prius Vehicle BROUGHT TO WORKSHOP
|
CUSTOMER PROBLEM ANALYSIS AND SYMPTOM CHECK
HINT:
- In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
- Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
- The following 5 items are important points for problem analysis:
What
Toyota Prius Vehicle model, system name
When
Date, time, occurrence frequency
Where
Road conditions
Under what conditions?
Driving conditions, weather conditions
How did it happen?
Problem symptoms
|
PRE-CHECK
(a) Measure the auxiliary battery voltage with the ignition switch off.
Standard Voltage:
11 to 14 V
If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
(b) Check the fuses and relays.
(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.
|
CHECK CAN COMMUNICATION SYSTEM*
(a) Using the GTS, check for CAN communication system DTCs.
for HEV Model: Click here ![]()
for PHEV Model: Click here ![]()
Result | Proceed to |
|---|---|
CAN DTCs are not output |
A |
CAN DTCs are output |
B |
| B | GO TO CAN COMMUNICATION SYSTEM for HEV Model: Click here for PHEV Model: Click here |
|
CHECK FOR DTC*
(a) Check for DTCs.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Trouble CodesResult | Proceed to |
|---|---|
DTCs are not output |
A |
DTCs are output |
B |
| B | GO TO DIAGNOSTIC TROUBLE CODE CHART |
|
PROBLEM SYMPTOMS TABLE
(a) Refer to Problem Symptoms Table.
Click here ![]()
Result | Proceed to |
|---|---|
Fault is not listed in Problem Symptoms Table |
A |
Fault is listed in Problem Symptoms Table |
B |
| B | GO TO PROBLEM SYMPTOMS TABLE |
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
(a) Operation Check
Click here ![]()
(b) Data List / Active Test
Click here ![]()
(c) Terminals of ECU
Click here ![]()
(d) Inspection
|
REPAIR OR REPLACE
|
CONFIRMATION TEST
| NEXT | END |
Operation Check
OPERATION CHECK
ACOUSTIC VEHICLE ALERTING SYSTEM OPERATION CHECK
(a) System operation check (vehicle stopped)
NOTICE:
Perform this check with the AUTO function (shift-linked function) of the electric parking brake system off.
(1) Apply the parking brake.
(2) Turn the ignition switch to ON (READY).
(3) With the shift state in park (P), confirm that the acoustic Toyota Prius vehicle alerting system does not operate (does not produce a sound).
(4) When the shift state is changed from park (P) to neutral (N), check that the acoustic vehicle alerting system operates (produces a sound).
(b) System operation check (vehicle being driven)
(1) Turn the ignition switch to ON (READY).
(2) Operate the EV drive mode switch and drive the Toyota Prius vehicle using EV drive mode.
(3) When the shift state is changed from park (P) to drive (D), confirm that the acoustic vehicle alerting system operates (produces a sound) when the vehicle is driven at speeds of 35 km/h or less using EV drive mode.
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
Symptom | Suspected Area | Link |
|---|---|---|
Sound is not produced |
Refer to "There is No Sound Made" |
Terminals Of Ecu
TERMINALS OF ECU
CHECK VEHICLE APPROACHING SPEAKER CONTROLLER

(a) Disconnect the A59 vehicle approaching speaker controller connector.
(b) Measure the voltage and resistance according to the value(s) in the table below.
Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
A59-7 ( B) - Body ground |
Power source |
Ignition switch off |
11 to 14 V |
A59-12 (GND) - Body ground |
Ground |
Always |
Below 1 Ω |
(c) Connect the A59 Toyota Prius vehicle approaching speaker controller connector.
(d) Check the signal waveform and check for pulses according to the condition(s) in the table below.
Terminal No. (Symbol) | Terminal Description | Condition | Specified Condition |
|---|---|---|---|
A59-3 (SP ) - A59-4 (SP-) |
Toyota Prius Vehicle approaching speaker assembly output |
Vehicle approaching speaker assembly operating |
A waveform synchronized with the sound is output. (See Waveform) |
A59-1 (CANH) - A59-12 (GND) |
CAN communication line |
Ignition switch ON |
Pulse generation |
A59-2 (CANL) - A59-12 (GND) |
CAN communication line |
Ignition switch ON |
Pulse generation |
(1) Waveform

Item | Condition |
|---|---|
Tester Connection |
A59-3 (SP ) - A59-4 (SP-) |
Tool Setting |
1 V/DIV., 500 ms./DIV. |
Condition |
Toyota Prius Vehicle approaching speaker assembly operating |
Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Read the Data List according to the display on the GTS.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Data ListTester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
Total Distance Traveled |
Total distance traveled |
Min.: 0 Max.: 16777215 |
- |
Although this item is displayed on the GTS, it is not applicable to this Toyota Prius vehicle. |
Total Distance Traveled - Unit |
Unit for total distance traveled |
-, km or mile |
- |
Although this item is displayed on the GTS, it is not applicable to this Toyota Prius vehicle. |
Engine Mode |
Engine condition |
Stopped, Move to Stopping, Starting or Running |
- |
- |
Shift Switch Status |
Shift state |
P Range, R Range, N Range, D Range or B Range |
- |
- |
Estimated Toyota Prius Vehicle Speed |
Estimated vehicle speed |
0 to 655 km/h |
- |
- |
Stop Light SW |
Stop light switch signal |
OFF or ON |
OFF: Brake pedal released ON: Brake pedal depressed |
- |
IGP |
Status of IGR signal |
OFF or ON |
OFF: IGP off ON: IGP on |
- |
Ready Indicator |
Ready indicator status |
Light OFF, Blinking or Light ON |
- |
- |
Door Lock Answerback Sound Setting |
Status of door lock answerback sound setting |
Normal Sound or Other Sound |
- |
The display varies depending on the Toyota Prius vehicle specifications. |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Perform the Active Test according to the display on the GTS.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Active TestTester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
Proximity Sound (Toyota Prius Vehicle Stationary) |
0 km/h vehicle proximity warning sound |
OFF or ON |
- |
Proximity Sound (5 km/h,3 mph) |
5 km/h Toyota Prius vehicle proximity warning sound |
OFF or ON |
- |
Proximity Sound (10 km/h,6 mph) |
10 km/h vehicle proximity warning sound |
OFF or ON |
- |
Proximity Sound (15 km/h,9 mph) |
15 km/h Toyota Prius vehicle proximity warning sound |
OFF or ON |
- |
Proximity Sound (20 km/h,12 mph) |
20 km/h vehicle proximity warning sound |
OFF or ON |
- |
Proximity Sound (30 km/h,18 mph) |
30 km/h Toyota Prius vehicle proximity warning sound |
OFF or ON |
- |
Proximity Sound (Reverse 6 km/h,3,6 mph) |
6 km/h reversing Toyota Prius vehicle proximity warning sound |
OFF or ON |
- |
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Acoustic Vehicle Alerting SystemDTC No. | Detection Item | DTC Output from | Priority | Link |
|---|---|---|---|---|
B135013 |
Acoustic Toyota Prius Vehicle Alerting Speaker Circuit Open |
Acoustic Vehicle Alerting System |
A |
|
B135019 |
Acoustic Toyota Prius Vehicle Alerting Speaker Circuit Current Above Threshold |
Acoustic Vehicle Alerting System |
A |
|
U012987 |
Lost Communication With Brake System Control Module Missing Message |
Acoustic Toyota Prius Vehicle Alerting System |
B |
|
U014087 |
Lost Communication with Body Control Module Missing Message |
Acoustic Toyota Prius Vehicle Alerting System |
B |
|
U029387 |
Lost Communication with Hybrid/EV Powertrain Control Module Missing Message |
Acoustic Toyota Prius Vehicle Alerting System |
B |
|
U032257 |
Software Incompatibility with Body Control Module Invalid/Incompatible Software Component |
Acoustic Toyota Prius Vehicle Alerting System |
A |
Acoustic Vehicle Alerting Speaker Circuit Open (B135013,B135019)
DESCRIPTION
The vehicle approaching speaker assembly circuit consists of the vehicle approaching speaker controller and vehicle approaching speaker assembly.
This DTC is stored when a malfunction is detected in the vehicle approaching speaker assembly circuit or vehicle approaching speaker controller.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
B135013 |
Acoustic Toyota Prius Vehicle Alerting Speaker Circuit Open |
Detection condition:
|
|
Acoustic Vehicle Alerting System |
A |
B135019 |
Acoustic Toyota Prius Vehicle Alerting Speaker Circuit Current Above Threshold |
Detection condition:
|
|
Acoustic Toyota Prius Vehicle Alerting System |
A |
WIRING DIAGRAM

PROCEDURE
INSPECT Toyota Prius Vehicle APPROACHING SPEAKER ASSEMBLY
Click here ![]()
| NG | REPLACE VEHICLE APPROACHING SPEAKER ASSEMBLY |
|
CHECK HARNESS AND CONNECTOR (Toyota Prius Vehicle APPROACHING SPEAKER ASSEMBLY - VEHICLE APPROACHING SPEAKER CONTROLLER)
Pre-procedure1
(a) Disconnect the A59 vehicle approaching speaker controller connector.
(b) Disconnect the A33 vehicle approaching speaker assembly connector.
Procedure1
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition | Result |
|---|---|---|---|
A33-2 ( ) - A59-3 (SP ) |
Always |
Below 1 Ω |
Ω |
A33-1 (-) - A59-4 (SP-) |
Always |
Below 1 Ω |
Ω |
A33-2 ( ) or A59-3 (SP ) - Body ground |
Always |
10 kΩ or higher |
kΩ |
A33-1 (-) or A59-4 (SP-) - Body ground |
Always |
10 kΩ or higher |
kΩ |
A33-1 (-) - A33-2 ( ) |
Always |
10 kΩ or higher |
kΩ |
Post-procedure1
(d) None
| OK | REPLACE Toyota Prius Vehicle APPROACHING SPEAKER CONTROLLER |
| NG | REPAIR OR REPLACE HARNESS OR CONNECTOR |
Lost Communication With Brake System Control Module Missing Message (U012987,U014087,U029387)
DESCRIPTION
These DTCs are stored when the CAN communication system is malfunctioning.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
U012987 |
Lost Communication With Brake System Control Module Missing Message |
The Toyota Prius vehicle approaching speaker controller does not receive data from the No. 2 skid control ECU (brake actuator assembly) for approximately 10 seconds or more. |
|
Acoustic Toyota Prius Vehicle Alerting System |
B |
U014087 |
Lost Communication with Body Control Module Missing Message |
The vehicle approaching speaker controller does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more. |
|
Acoustic Toyota Prius Vehicle Alerting System |
B |
U029387 |
Lost Communication with Hybrid/EV Powertrain Control Module Missing Message |
The Toyota Prius vehicle approaching speaker controller does not receive data from the hybrid vehicle control ECU for approximately 10 seconds or more. |
|
Acoustic Toyota Prius Vehicle Alerting System |
B |
PROCEDURE
CHECK FOR DTC
(a) Check for DTCs.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Trouble CodesHINT:
When DTCs indicating a CAN communication system malfunction are output, perform troubleshooting for the CAN communication system before the acoustic vehicle alerting system.
| NEXT | GO TO CAN COMMUNICATION SYSTEM for HEV Model: Click here for PHEV Model: Click here |
Software Incompatibility with Body Control Module Invalid/Incompatible Software Component (U032257)
DESCRIPTION
The vehicle approaching speaker controller receives vehicle information from the main body ECU (multiplex network body ECU) via CAN communication.
This DTC is stored when the vehicle information from the main body ECU (multiplex network body ECU) and that stored in the Toyota Prius vehicle approaching speaker controller do not match.
DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority |
|---|---|---|---|---|---|
U032257 |
Software Incompatibility with Body Control Module Invalid/Incompatible Software Component |
The Toyota Prius vehicle information from the main body ECU (multiplex network body ECU) and that stored in the vehicle approaching speaker controller do not match. |
|
Acoustic Toyota Prius Vehicle Alerting System |
A |
NOTICE:
- If a vehicle approaching speaker controller which was installed to another vehicle is used, the information stored in the vehicle approaching speaker controller will not match the information from the Toyota Prius vehicle. As a result, a DTC may be stored.
- Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Click here

HINT:
The vehicle approaching speaker controller automatically updates the Toyota Prius vehicle information based on the data received from the main body ECU (multiplex network body ECU).
PROCEDURE
CHECK DTC OUTPUT (HEALTH CHECK)
(a) According to the display on the GTS, select "Health Check".
OK:
DTCs are not output by any system other than the acoustic Toyota Prius vehicle alerting system (Acoustic Vehicle Alerting System).
Result | Proceed to |
|---|---|
U032257 is not output by a system other than the acoustic vehicle alerting system |
A |
U032257 is output by a system other than the acoustic Toyota Prius vehicle alerting system |
B |
| B | REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
|
REPLACE Toyota Prius Vehicle APPROACHING SPEAKER CONTROLLER
HINT:
Click here ![]()
|
CLEAR DTC
(a) Clear the DTCs.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Clear DTCs(b) Turn the ignition switch off.
|
CHECK FOR DTCs
(a) Check for DTCs.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Trouble CodesResult | Proceed to |
|---|---|
DTCs are not output |
A |
DTCs are output |
B |
| A | END (Toyota Prius Vehicle APPROACHING SPEAKER CONTROLLER IS DEFECTIVE) |
| B | REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) |
There is No Sound Made
DESCRIPTION
Based on signals received from each ECU, the vehicle approaching speaker controller outputs warning sounds through the vehicle approaching speaker assembly.
WIRING DIAGRAM
NOTICE:
- Inspect the fuses for circuits related to this system before performing the following procedure.
- The acoustic Toyota Prius vehicle alerting system uses the CAN communication system. Inspect the communication functions by following How to Proceed with Troubleshooting.
Click here

PROCEDURE
CHECK FOR DTC
(a) Check for DTCs.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Trouble CodesResult | Proceed to |
|---|---|
B135013 and B135019 are not output |
A |
B135013 or B135019 is output |
B |
| B | GO TO DTC CHART B135013 |
|
PERFORM ACTIVE TEST USING GTS
(a) Perform the Active Test according to the display on the GTS.
Body Electrical > Acoustic Toyota Prius Vehicle Alerting System > Active TestTester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
Proximity Sound (20 km/h,12 mph) |
20 km/h Toyota Prius vehicle proximity warning sound |
OFF or ON |
- |
Proximity Sound (20 km/h,12 mph)
Result | Proceed to |
|---|---|
The warning sound is produced |
A |
The warning sound is not produced |
B |
| A | REPLACE Toyota Prius Vehicle APPROACHING SPEAKER CONTROLLER |
|
CHECK HARNESS AND CONNECTOR (Toyota Prius Vehicle APPROACHING SPEAKER CONTROLLER - POWER SOURCE AND BODY GROUND)
(a) Disconnect the A59 vehicle approaching speaker controller connector.
(b) Measure the voltage according to the value(s) in the table below.
Standard Voltage:
Tester Connection | Condition | Specified Condition |
|---|---|---|
A59-7 ( B) - Body ground |
Ignition switch off |
11 to 14 V |
(c) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Tester Connection | Condition | Specified Condition |
|---|---|---|
A59-12 (GND) - Body ground |
Always |
Below 1 Ω |
| OK | REPLACE Toyota Prius Vehicle APPROACHING SPEAKER CONTROLLER |
| NG | REPAIR OR REPLACE HARNESS OR CONNECTOR |






