Sub Battery System

In this manual: Sub Battery System
How To Troubleshoot Ecu Controlled Systems — 1How To Use This Manual — 1Identification Information — 1Repair Instruction — 1Terms — 12zr-fxe Air Cleaner Filter Element — 12zr-fxe Auxiliary Battery — 12zr-fxe Coolant (for Engine Coolant) — 12zr-fxe Oil And Oil Filter — 12zr-fxe Spark Plug — 1Air Conditioning Filter — 1Battery Cooling Filter — 1Brake Fluid — 1Coolant (for Inverter) — 1Front Brake Flexible Hose — 1Front Disc Brake Pad — 1Front Lower Ball Joint — 1Front Wheel Alignment — 1Front Wiper Rubber — 1General Maintenance — 1M20a-fxs Air Cleaner Filter Element — 1M20a-fxs Auxiliary Battery — 1M20a-fxs Coolant (for Engine Coolant) — 1M20a-fxs Oil And Oil Filter — 1M20a-fxs Spark Plug — 1Pa10/pb10/pb12 Hybrid Transaxle Fluid — 1Q810 Hybrid Transaxle Fluid — 1Rear Brake Flexible Hose — 1Rear Disc Brake Pad — 1Rear Wheel Alignment — 1Steering Column — 1Tire And Wheel — 1Transmitter Battery — 1When Disconnecting Or Reconnecting Battery Terminal — 1When Replacing Or Removing/installing Parts — 1Automatic High Beam Main Switch — 1Automatic High Beam System — 1Driver Monitor Camera — 1Driver Monitor Camera System — 1Driver Monitor Ecu — 1Front Camera — 1Front Camera System — 1Front Radar Sensor System — 1Front Side Radar Sensor — 1Front Side Radar Sensor System — 1Millimeter Wave Radar Sensor — 1Utility — 1Advanced Park — 1Advanced Park Main Switch — 1Amplifier Antenna — 1Audio And Visual System — 1Front Door Speaker — 1Instrument Panel Speaker — 1Microphone — 1Noise Filter — 1Pillar Speaker — 1Radio Antenna Cord (for Back Door) — 1Radio Antenna Cord (for Instrument Panel) — 1Radio Antenna Cord (for Roof) — 1Radio Receiver — 1Rear Door Speaker — 1Roof Antenna — 1Stereo Component Amplifier — 1Stereo Jack Adapter Assembly — 1Window Glass Antenna Wire — 1Back-up Battery — 1Dcm(telematics Transceiver) — 1Manual(sos)switch — 1Safety Connect System — 1Telephone And Gps Antenna (for Front Side) — 1Telephone And Gps Antenna (for Roof Side) — 1Telephone And Gps Antenna Cords — 1Garage Door Opener System (for Digital Inner Mirror) — 1Garage Door Opener System (for Ec Inner Mirror) — 1Blind Spot Monitor Sensor — 1Blind Spot Monitor System — 1Clearance Warning Ecu — 1Intuitive Parking Assist System — 1Panoramic View Monitor Switch — 1Panoramic View Monitor System — 1Parking Assist Ecu — 1Parking Assist Light — 1Parking Assist Monitor System — 1Parking Support Brake System — 1Rear View Monitor System — 1Television Camera (for Front) — 1Television Camera (for Rear) — 1Television Camera (for Side) — 1Ultrasonic Sensor (for Front) — 1Ultrasonic Sensor (for Rear) — 1Brake Actuator — 1Brake Pedal Stroke Sensor — 1Electronically Controlled Brake System — 1Front Speed Sensor — 1Rear Speed Sensor (for Awd) — 1Steering Angle Sensor — 1Brake Booster — 1Brake Fluid — 1Brake Line — 1Brake Pedal — 1Brake System — 1Electric Parking Brake Actuator — 1Electric Parking Brake Switch — 1Electric Parking Brake System — 1Forced Release — 1Front Axle Hub — 1Front Axle Hub Bolt — 1Rear Axle Carrier (for 2wd) — 1Rear Axle Carrier (for Awd) — 1Rear Axle Hub (for 2wd) — 1Rear Axle Hub (for Awd) — 1Rear Axle Hub Bolt — 1Steering Knuckle — 1Drive Shaft System — 1Front Drive Shaft Assembly — 1Rear Drive Shaft Assembly — 1Combination Switch — 1Electronic Shift Lever System — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Oil Seal — 1Hybrid Transaxle System — 1Input Shaft Oil Seal — 1Motor Cable — 1Pa10 Hybrid Vehicle Transaxle — 1Pa10 Manual Parking Lock Release — 1Pa10 Oil Cooler — 1Pb10/pb12 Hybrid Vehicle Transaxle — 1Pb10/pb12 Manual Parking Lock Release — 1Pb10/pb12 Oil Cooler — 1Shift Control Actuator — 1Shift Lever — 1Shift Lever Knob — 1Differential Side Gear Shaft — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Side Gear Oil Seal — 1Motor Cable — 1Rear Traction Motor — 1Coolant (for Engine) — 1Cooling Fan Motor — 1Cooling Fan System — 1Radiator — 1Relay — 1Thermostat — 1Water Pump — 1Canister — 1Egr Cooler — 1Egr Valve — 1Emission Control System — 1Fuel Tank Cap — 1Pcv Valve — 1Purge Valve — 1Vacuum Sensor — 1Air Fuel Ratio Sensor — 1Camshaft Oil Control Valve — 1Camshaft Position Sensor — 1Crankshaft Position Sensor — 1Ecm — 1Engine Coolant Temperature Sensor — 1Heated Oxygen Sensor — 1Ignition Coil And Spark Plug — 1Ignition System — 1Knock Sensor — 1Mass Air Flow Meter — 1Relay — 1Sfi System — 1Throttle Body — 1Camshaft — 1Cylinder Block — 1Cylinder Head — 1Cylinder Head Gasket — 1Engine — 1Engine Assembly — 1Engine Unit — 1Front Crankshaft Oil Seal — 1Rear Crankshaft Oil Seal — 1Fuel Filter — 1Fuel Injector — 1Fuel Pressure Regulator — 1Fuel Pump — 1Fuel Sender Gauge Assembly — 1Fuel System — 1Fuel Tank — 1Air Cleaner Filter Element — 1Exhaust Manifold — 1Exhaust Pipe — 1Intake Manifold — 1Intake System — 1Lubrication System — 1Oil And Oil Filter — 1Oil Pan And Oil Level Sensor — 1Oil Pressure Switch — 1Oil Pump — 1Accelerator Pedal Sensor — 1Battery Blower (for Hev Model) — 1Battery Ecu (for Hev Model) — 1Battery Ecu (for Phev Model) — 1Battery Voltage Sensor (for Phev Model) — 1Charge Cable (for Phev Model) — 1Charge Indicator (for Phev Model) — 1Charge Inlet (for Phev Model) — 1Combination Switch — 1Coolant (for Inverter) — 1Cooler (for Phev Model) — 1Electric Vehicle Charger Assembly (for Phev Model) — 1Frame Wire (for Hev Model) — 1Frame Wire (for Phev Model) — 1Heater Relay (for Phev Model) — 1Hv Battery (for Hev Model) — 1Hv Battery (for Phev Model) — 1Hv Battery Heater (for Phev Model) — 1Hv Battery Stack (for Phev Model) — 1Hv Relay Assembly (for Hev Model) — 1Hv Relay Assembly (for Phev Model) — 1Hybrid Battery System (for 2zr-fxe) — 1Hybrid Battery System (for M20a-fxs) — 1Hybrid Battery System (for Phev Model) — 1Hybrid Vehicle Control Ecu — 1Inverter With Converter (for Hev Model) — 1Motor Generator Control System (for 2zr-fxe) — 1Plug-in Charge Control System (for Phev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Service Plug Grip (for Hev Model) — 1Sub Radiator — 1Water Pump With Motor — 1Auxiliary Battery — 1Battery Current Sensor — 1Charging System — 1Solar Charging System — 1Solar Control Unit — 1Solar Roof — 1Can Communication System (for Hev Model) — 1Lin Communication System — 1Network Gateway Ecu — 1Integration Control Supply — 1Main Body Ecu — 1Power Integration System — 1Sub Battery System — 1Power Steering Ecu — 1Power Steering System — 1Heated Steering Wheel Controller — 1Heated Steering Wheel System — 1Steering Column Assembly — 1Steering Heater Switch — 1Steering Pad Switch — 1Steering System — 1Steering Wheel — 1Front Lower Ball Joint — 1Front Lower Suspension Arm (for 2zr-fxe Lh Side) — 1Front Lower Suspension Arm (for 2zr-fxe Rh Side) — 1Front Lower Suspension Arm (for M20a-fxs) — 1Front Shock Absorber — 1Front Stabilizer Bar — 1Front Suspension Member — 1Rear Coil Spring — 1Rear Lower Arm (for Awd Lh Side) — 1Rear Lower Arm (for Awd Rh Side) — 1Rear Lower Arm (for Hev Model 2wd) — 1Rear Lower Arm (for Phev Model) — 1Rear Shock Absorber — 1Rear Stabilizer Bar — 1Rear Suspension Member (for 2wd) — 1Rear Suspension Member (for Awd) — 1Rear Trailing Arm — 1Rear Upper Arm — 1Tire And Wheel System — 1Tire Repair Seal — 1Tire Pressure Warning Receiver — 1Tire Pressure Warning System — 1Tire Pressure Warning Valve — 1Acoustic Vehicle Alerting System — 1Vehicle Approaching Speaker — 1Vehicle Approaching Speaker Ecu — 1Back Door — 1Back Door Closer Ecu — 1Back Door Opener Switch — 1Back Door Support — 1Back Door Weatherstrip — 1Charge Lid Courtesy Switch — 1Charge Lid Opener Motor Assembly — 1Charge Lid Opener System — 1Charge Lid Opener Unit — 1Front Door — 1Front Door Opening Trim Weatherstrip — 1Fuel Lid Opener Motor Assembly — 1Fuel Lid Opener Switch — 1Fuel Lid Opener System — 1Hood — 1Hood Lock Control Cable Assembly — 1Power Back Door Closer Switch — 1Power Back Door Control Switch — 1Power Back Door Drive Unit — 1Power Back Door System — 1Power Back Door Touch Sensor — 1Power Back Door Warning Buzzer — 1Rear Door — 1Rear Door Opening Trim Weatherstrip — 1Reserve Lock Switch — 1Front Bumper — 1Front Door Belt Moulding — 1Front Door Window Frame Moulding — 1Front Fender — 1Front Pillar Upper Cover — 1Grille Shutter — 1Grille Shutter System — 1Name Plate — 1Quarter Garnish — 1Rear Bumper — 1Rear Door Belt Moulding — 1Rear Door Window Frame Moulding — 1Rear Wheel House Plate — 1Rocker Panel Moulding — 1Roof Drip Side Finish Moulding — 1Roof Garnish — 1Wheel Opening Moulding (for Front Side) — 1Wheel Opening Moulding (for Rear Side) — 1Windshield Outside Moulding — 1Horn — 1Horn System — 1Relay — 1Automatic Light Control Sensor — 1Back-up Light Assembly — 1Charge Lid Light — 1Front Marker Light — 1Hazard Warning Switch — 1Headlight Assembly — 1Headlight Dimmer Switch — 1Headlight Leveling Switch — 1High Mounted Stop Light Assembly — 1Illumination Light Assembly — 1License Plate Light Assembly — 1Lighting System — 1Rear Combination Light Assembly — 1Rear Light Assembly — 1Rear Side Marker Light Assembly — 1Relay — 1Side Turn Signal Light Assembly — 1Stop Light Switch — 1Switch Housing — 1Outer Mirror Switch — 1Outer Rear View Mirror — 1Outer Rear View Mirror Cover — 1Outer Rear View Mirror Glass — 1Power Mirror Control System — 1Back Door Glass — 1Front Passenger Side Power Window Switch — 1Power Window Control System — 1Power Window Master Switch — 1Power Window Regulator Motor (for Front Door) — 1Power Window Regulator Motor (for Rear Door) — 1Rear Power Window Switch — 1Relay — 1Roof Window Fix Glass — 1Window Defogger System — 1Windshield Deicer Switch — 1Windshield Deicer System — 1Windshield Glass — 1Front Wiper Motor — 1Rain Sensor — 1Relay — 1Washer Motor — 1Washer Nozzle (for Front Side) — 1Washer Nozzle (for Rear Television Camera) — 1Wiper And Washer System — 1Wiper Ecu — 1Wiper Switch — 1Back Door Lock — 1Door Control Receiver — 1Door Control Switch — 1Door Control Transmitter — 1Door Lock Release Motor (for Rear Side) — 1Door Outside Handle (for Rear Side) — 1Front Door Lock — 1Power Door Lock Control System — 1Rear Door Lock — 1Transmitter Battery — 1Wireless Door Lock Control System — 1Accumulator — 1Air Conditioning Amplifier — 1Air Conditioning Panel — 1Air Conditioning Pressure Sensor — 1Air Conditioning Unit — 1Ambient Temperature Sensor — 1Blower Unit — 1Condenser (for Hev Model) — 1Condenser (for Phev Model) — 1Discharge Temperature Sensor — 1Electric Expansion Valve (cooling) — 1Electric Expansion Valve (heating) — 1Evaporator Pipe Temperature Sensor — 1Evaporator Pressure Regulator — 1Front Blower Motor — 1Front Evaporator Front Solenoid Valve — 1Air Conditioning System (for Hev Model) — 1Front Evaporator Temperature Sensor — 1Heat Exchanger Temperature Sensor — 1Heat Pump Ecu — 1High Pressure Magnetic Valve — 1Humidity Sensor — 1Internal Condenser Temperature Sensor — 1Low Pressure Magnetic Valve — 1Refrigerant (for Hfc-134a(r134a)) — 1Refrigerant Line (for Hev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Room Temperature Sensor — 1Solar Sensor — 1Floor Carpet — 1Front Console Box — 1Instrument Panel Safety Pad — 1Roof Headlining — 1Roof Sunshade — 1Ambient Light (for Driver Side) — 1Ambient Light (for Front Passenger Side) — 1Back Door Courtesy Switch — 1Footwell Light — 1Glove Box Light — 1Lighting System — 1Luggage Compartment Room Light — 1Personal Light — 1Room Light — 1Vanity Light — 1Vanity Light Switch — 1Combination Meter — 1Meter / Gauge System — 1Trip Switch — 1Digital Inner Mirror — 1Digital Rear-view Mirror System — 1Inner Mirror Monitor Camera — 1Inner Rear View Mirror (w/o Ec Mirror) — 1Accessory Power Outlet System — 1Power Outlet Socket (for Console Box Front Side) — 1Power Outlet Socket (for Console Box Rear Side) — 1Power Outlet Socket (for Console Box) — 1Power Outlet Socket (for Luggage Compartment) — 1Power Outlet Switch — 1Wireless Charger Assembly — 1Wireless Charging System — 1Climate Control Seat System — 1Front Power Seat Control System (w/ Memory) — 1Front Power Seat Motor Assembly — 1Front Seat Assembly (for Power Seat) — 1Front Seat Cushion Heater (for Power Seat) — 1Front Seatback Heater (for Power Seat) — 1Lumbar Support Adjuster Assembly — 1Power Seat Control Ecu — 1Power Seat Switch — 1Power Seat Track Rail Assembly — 1Rear Seat Assembly — 1Rear Seat Cushion Heater — 1Rear Seat Reminder System — 1Rear Seatback Heater — 1Seat Heater Control — 1Seat Heater Switch (for Front Seat) — 1Seat Heater Switch (for Rear Side) — 1Seat Heater System — 1Seat Memory Switch — 1Child Restraint Seat Anchor Bracket — 1Front Seat Inner Belt Assembly — 1Front Seat Outer Belt Assembly — 1Occupant Detection Sensor (for Front Passenger Side) — 1Rear Center Seat Outer Belt Assembly — 1Rear Seat Inner Belt Assembly (for Rh Side) — 1Rear Seat Outer Belt Assembly — 1Seat Belt Warning System (w/ Occupant Classification System) — 1Tongue Plate Stopper — 1Airbag System — 1Center Airbag Sensor Assembly — 1Curtain Shield Airbag Assembly — 1Front Airbag Sensor — 1Front Passenger Airbag Assembly — 1Front Seat Side Airbag Assembly — 1Inspection After Collision — 1Knee Airbag Assembly — 1Occupant Classification System — 1Rear Seat Side Airbag Assembly — 1Side Airbag Sensor (for Center Pillar) — 1Side Airbag Sensor (for Front Door) — 1Spiral Cable — 1Steering Pad — 1Certification Ecu — 1Digital Key Ecu — 1Digital Key Receiver (for Front Floor) — 1Digital Key Receiver (for Outside Luggage Compartment) — 1Digital Key Receiver (for Rear Door) — 1Digital Key System — 1Electrical Key Oscillator (for Front Floor) — 1Electrical Key Oscillator (for Outside Luggage Compartment) — 1Electrical Key Oscillator (for Rear Floor) — 1Engine Hood Courtesy Switch — 1Id Code Box — 1Smart Key System (for Start Function) — 1
~20min read
  • Precaution
  • Parts Location
  • System Diagram
  • How To Proceed With Troubleshooting
  • Terminals Of Ecu
  • Freeze Frame Data
  • Fail-safe Chart
  • VEHICLE CONTROL HISTORY (RoB)
  • Sub Battery Control Module Internal Temperature Sensor "A" Circuit Short to Ground (B103211,...,B230562)
  • Sub Battery System Output Power Relay "F" Actuator Stuck On (B22937E)
  • Deterioration of Sub Battery (B22E000)

Precaution

PRECAUTION

PRECAUTIONS FOR INSPECTING SUB BATTERY SYSTEM

NOTICE:

  • When disconnecting a wire harness of any component connected to the supply power of the integrated capacitor (integration control supply) or when removing the integrated capacitor (integration control supply), make sure to wait 5 minutes or more after turning the ignition switch off for self-diagnosis to complete and the voltage of the integrated capacitor (integration control supply) to discharge.
  • After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

    Click here

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click here

Parts Location

PARTS LOCATION

ILLUSTRATION

*1

NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY

- 2ND BATT FUSE

*2

SHIFT CONTROL ACTUATOR ASSEMBLY

- SHIFT ACTUATOR ECU

*3

BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

-

-

ILLUSTRATION

*1

MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

*2

POWER DISTRIBUTION BOX ASSEMBLY

*3

TRANSMISSION FLOOR SHIFT ASSEMBLY

- SHIFT CONTROL ECU

*4

INTEGRATED CAPACITOR (INTEGRATION CONTROL SUPPLY)

*5

DLC3

-

-

System Diagram

SYSTEM DIAGRAM

How To Proceed With Troubleshooting

HINT:

  • Use these procedures to troubleshoot the sub battery system.
  • *: Use the GTS.

PROCEDURE

  1. Toyota Prius Vehicle BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

NEXT
  1. PRE-CHECK

(a) Measure the auxiliary battery voltage.

Standard voltage:

12 V or higher (ignition switch off)

HINT:

If the auxiliary battery voltage is below 12 V, recharge or replace the auxiliary battery.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

NEXT
  1. CHECK CAN COMMUNICATION SYSTEM*

(a) Using the GTS, check if the CAN communication system is functioning normally.

HINT:

Refer to Communication Bus Check in CAN Communication System.

  • for HEV Model:

    Click here

  • for PHEV Model:

    Click here

OK:

CAN communication system is functioning normally.

NG

GO TO CAN COMMUNICATION SYSTEM

  • for HEV Model:

    Click here

  • for PHEV Model:

    Click here

OK
  1. CHECK FOR DTC*

(a) Check and record DTCs and Freeze Frame Data.

Body Electrical > Sub Battery System > Trouble Codes

(b) If the DTCs is output, record it.

Result

Proceed to

DTCs are not output

A

DTCs are output.

B

B

GO TO DIAGNOSTIC TROUBLE CODE CHART

A
  1. CHECK Toyota Prius Vehicle CONTROL HISTORY (RoB)*

(a) Check and record Vehicle Control History (RoB).

Body Electrical > Sub Battery System > Utility

Toyota Prius Vehicle Control History (RoB)

(b) If the vehicle control history is output, record it.

Result

Proceed to

RoBs are not output

A

RoBs are output.

B

A

USE SIMULATION METHOD TO CHECK

B

GO TO Toyota Prius Vehicle CONTROL HISTORY (ROB)

Terminals Of Ecu

TERMINALS OF ECU

INTEGRATED CAPACITOR (INTEGRATION CONTROL SUPPLY)

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

K26-1 (BUA3) - K26-2 (GND)

Backup power source output to C-ACT

Ignition switch off

Below 1 V

K26-2 (GND) - Body ground

Earth ground

Ignition switch off

Below 1 Ω

K26-3 (CANH) - K26-2 (GND)

CAN communication signal

Ignition switch ON

Pulse generation

K26-5 (WU1) - K26-2 (GND)

Start request signal input from brake system

Ignition switch ON

8 to 16 V

K26-6 (BUSE) - K26-2 (GND)

Backup power source output to A1ECU

Ignition switch ON

8 to 16 V

K26-7 ( B) - K26-2 (GND)

System 1 ( B) power source

Always

8 to 16 V

K26-9 (BUAE) - K26-2 (GND)

Backup power source output to A2ECU

Ignition switch ON

8 to 16 V

K26-11 (CANL) - K26-2 (GND)

CAN communication signal

Ignition switch ON

Pulse generation

K26-14 (BR) - K26-2 (GND)

PWM communication signal input from transmission floor shift assembly (shift control ECU)

Ignition switch ON

Pulse generation

K26-15 (RO) - K26-2 (GND)

PWM communication signal output to transmission floor shift assembly (shift control ECU)

Ignition switch ON

Pulse generation

K26-16 (IG) - K26-2 (GND)

IGR signal input

Ignition switch ON

8 to 16 V

K26-17 (DRO1) - K26-2 (GND)

Door courtesy (door open/close) signal input

Driver door closed

8 to 16 V

K26-19 (BUA) - K26-2 (GND)

Backup power source output to A-ACT

Ignition switch ON

8 to 16 V

Freeze Frame Data

FREEZE FRAME DATA

HINT:

The integrated capacitor (integration control supply) records vehicle and driving condition information as Freeze Frame Data the moment a DTC is stored.

FREEZE FRAME DATA

(a) Check the Freeze Frame Data when a DTC is output.

Body Electrical > Sub Battery System > Trouble Codes

(b) Select a DTC in order to display its Freeze Frame Data.

LIST OF FREEZE FRAME DATA

Body Electrical > Sub Battery System

Tester Display

Total Distance Traveled

Total Distance Traveled - Unit

IGR Switch

H Switch

BR Signal

RO Signal

Door Unlock Operation Request Signal at Collision

Door Courtesy Signal

Wake Up Request Signal

DC/DC Converter Status

System Voltage Relay

System Voltage

AECU Relay

AECU Output Voltage

AECU Output Current

A2ECU Output Voltage

BECU Relay

BECU Output Voltage

BECU Output Current

CECU Relay

CECU Output Voltage

CECU Output Current

AACT Relay

AACT Output Voltage

AACT Output Current

BACT Relay

BACT Upstream Through Relay

BACT Downstream Through Relay

BACT Output Voltage

BACT Output Current

CACT Relay

CACT Output Voltage

CACT Output Current

Dark Current Cut Relay

Backflow Prevention Circuit Downstream Relay

Backflow Prevention Circuit Upstream Relay

Inflow Prevention Relay

Charging Circuit Information

Cell Balance Circuit Information

Reset Prevention Circuit Information

Control Status

BUV Voltage

PWB Voltage

PWB Current

Capacitor Voltage

Capacitor Current

Capacitor Temperature

Capacitor Resistance Calculation Value

Capacitor Capacity Calculation Value

Unit Temperature 1

Unit Temperature 2

Protection Circuit Diagnosis Signal (GND Overcurrent Detection)

Protection Circuit Diagnosis Signal (PWB Overvoltage Detection)

Protection Circuit Diagnosis Signal (PWB Overcurrent Detection)

Protection Circuit Diagnosis Signal (PWC Overcurrent Detection)

DC/DC Converter Step Up/Step Down Primary Power Supply Side Ground Fault Diagnosis Result

DC/DC Converter Step Up/Step Down Capacitor Side Ground Fault Diagnosis Result

DC/DC Converter Step Up/Step Down GND Side Ground Fault Diagnosis Result

DC/DC Converter Step Up/Step Down Discharging Diagnosis Result

DC/DC Converter Step Up/Step Down Charging Diagnosis Result

Capacitor Cell Overvoltage Diagnosis Result

Reset Prevention Circuit Short Diagnosis Result

AACT Output Terminal Ground Fault Diagnosis Result

AECU/A2ECU Output Terminal Ground Fault Diagnosis Result

Fail-safe Chart

FAIL-SAFE CHART

When the following DTCs are stored in the integrated capacitor (integration control supply), the system enters fail-safe mode.

Fail-safe Mode

Transition Conditions

Fail-safe Contents

Return Conditions

A DTC is stored for the integrated capacitor (integration control supply)

Remote park prohibited

After returning to normal, the ECU is reset after 6 minutes or more by turning off the ignition switch

VEHICLE CONTROL HISTORY (RoB)

VEHICLE CONTROL HISTORY (RoB)

DESCRIPTION OF ROB

  • The vehicle control history (RoB) is a function that records ECU data (record data) when triggered by specific vehicle behavior.
  • Checking history information and freeze frame data can be of use when performing troubleshooting, when a customer indicates that "the Toyota Prius vehicle cannot transition to advanced drive" or "advanced drive is canceled".

PRECAUTIONS FOR USE

  • Vehicle control history (RoB) is updated whenever a trigger occurs, therefore make sure to save data prior to checking symptoms.
  • Vehicle control history (RoB) might also be stored when the Active Test is performed or learning values, etc. are relearned. In this case, clear the Toyota Prius vehicle control history (RoB) before returning the vehicle.

CHECK VEHICLE CONTROL HISTORY (SUB BATTERY SYSTEM)

(a) Read the Vehicle Control History (RoB) according to the display on the GTS.

Body Electrical > Sub Battery System > Utility

Toyota Prius Vehicle Control History (RoB)

Vehicle Control History Item

Code

Item

Trigger Description

X0A74

Sub Battery Failure Detection

Toyota Prius Vehicle conditions and integrated capacitor (integration control supply) status stored when the main battery malfunctioned.

X0A76

Sub Battery Overvoltage Detection

Integrated capacitor (integration control supply) status stored when overvoltage of the main battery was detected.

Stored Data

Number of Triggers

Record Data

Note

Point

Sampling Period

4 codes

HINT:

  • If the detection conditions for a code that is currently stored are met again in a different trip, the code will be overwritten.
  • If the detection conditions for a code that is currently stored are met again in the same trip, the code will be overwritten.
  • If the detection conditions for a code that is not currently stored are met, the code will be stored.

1 point (no time-series data)

-

The data can be cleared by using the GTS.

CLEAR Toyota Prius Vehicle CONTROL HISTORY (SUB BATTERY SYSTEM)

(a) Read the Vehicle Control History (RoB) according to the display on the GTS.

Body Electrical > Sub Battery System > Utility

Toyota Prius Vehicle Control History (RoB)

(b) Press the DTC clear button.

NOTICE:

By performing this procedure, all stored Vehicle Control History (RoB) items will be cleared.

Sub Battery Control Module Internal Temperature Sensor "A" Circuit Short to Ground (B103211,...,B230562)

DESCRIPTION

Charging of the 2nd stage power source from the auxiliary battery is performed in preparation for when an auxiliary battery power source malfunction occurs.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Warning Indicate

DTC Output from

Priority

B103211

Sub Battery Control Module Internal Temperature Sensor "A" Circuit Short to Ground

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B103215

Sub Battery Control Module Internal Temperature Sensor "A" Circuit Short to Battery or Open

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22937F

Sub Battery System Output Power Relay "F" Actuator Stuck Off

The monitored CACT output voltage is at the threshold or less for 1 second or more

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22AF00

Internal DC/DC Converter System Performance

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22B017

Internal DC/DC Converter (Circuit 1) Circuit Voltage Above Threshold

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22B117

Internal DC/DC Converter (Circuit 2) Circuit Voltage Above Threshold

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22B419

Internal DC/DC Converter Input Current Circuit Current Above Threshold

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22B519

Internal DC/DC Converter Current Circuit Current Above Threshold

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22B911

Sub Battery Control Module Reset Prevention Circuit Circuit Short to Ground

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22B915

Sub Battery Control Module Reset Prevention Circuit Circuit Short to Battery or Open

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22C57F

Sub Battery System Output Power Relay "B" Actuator Stuck Off

The monitored AACT output voltage is at the threshold or less for 10 seconds or more

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22C67E

Sub Battery System Input Power Relay "A" Actuator Stuck On

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22C67F

Sub Battery System Input Power Relay "A" Actuator Stuck Off

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22CA7F

Sub Battery System Output Power Relay "A" Actuator Stuck Off

The monitored AECU and A2ECU are at the output voltage threshold or less for 10 seconds or more

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22D562

Sub Battery Control Module System Voltage Sensor Signal Compare Failure

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22D61C

Sub Battery Control Module Overcurrent/Overvoltage Detection Circuit Voltage Out of Range

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22E417

Sub Battery Circuit Voltage Above Threshold

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22E619

Sub Battery Circuit Current Above Threshold

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B22EF7E

Sub Battery System Input Power Relay "B" Actuator Stuck On

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

B230562

Internal Control Module Sub Battery Monitor Voltage Signal Compare Failure

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

CHECK FOR DTCs

(a) Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

(b) Turn the ignition switch off and wait 6 minutes or more. (A)

(c) Turn the ignition switch to ON. (B)

(d) Turn the GTS on. (C)

(e) Wait for 10 seconds or more. (D)

(f) Read the DTCs. (E)

HINT:

  • If a DTC is output, the system is malfunctioning.
  • If a DTC is not output, perform the following procedure.

(g) Enter the following menus: Body Electrical / Sub Battery System / Utility / All Readiness. (F)

(h) Enter the DTC to be checked. (G)

(i) Check the DTC judgment result. (H)

HINT:

  • If the judgment result is NORMAL, the system is normal.
  • If the judgment result is ABNORMAL, the system is malfunctioning.
  • If the judgment result is INCOMPLETE, perform steps (A) through (H) again.

NOTICE:

  • When removing/installing the transmission floor shift assembly (shift control ECU)/shift control actuator assembly (shift actuator ECU) or disconnecting/connecting connectors, make sure there is no power* supplied.

    *: Auxiliary battery, sub battery, integrated capacitor (integration control supply), etc.

  • Before removing and installing the integrated capacitor (integration control supply), make sure the cable is disconnected from the negative (-) auxiliary battery terminal after 5 minutes or more has elapsed since the ignition switched was turned off.
  • Before performing troubleshooting, check the state of fuses and connecters of this circuit, and contact voltage of respective terminals.

PROCEDURE

  1. CHECK FOR DTC

(a) Check for DTCs.

Body Electrical > Sub Battery System > Trouble Codes

Result

Proceed to

B103211, B103215, B22937F, B22AF00, B22B017, B22B117, B22B419, B22B519, B22B911, B22B915, B22C57F, B22C67E, B22C67F, B22CA7F, B22D562, B22D61C, B22E417, B22E619, B22EF7E or B230562 is output

A

B103211, B103215, B22937F, B22AF00, B22B017, B22B117, B22B419, B22B519, B22B911, B22B915, B22C57F, B22C67E, B22C67F, B22CA7F, B22D562, B22D61C, B22E417, B22E619, B22EF7E or B230562 is not output

B

A

REPLACE INTEGRATED CAPACITOR (INTEGRATION CONTROL SUPPLY)

B

USE SIMULATION METHOD TO CHECK

Sub Battery System Output Power Relay "F" Actuator Stuck On (B22937E)

DESCRIPTION

A malfunction check of the internal relay used to turn on/off the backup function is performed when an auxiliary battery power source malfunction occurs.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Warning Indicate

DTC Output from

Priority

B22937E

Sub Battery System Output Power Relay "F" Actuator Stuck On

The monitored CACT output voltage is at the threshold or more for 10 seconds or more

(1 trip detection logic)

  • Integrated capacitor (integration control supply)
  • Brake booster with master cylinder assembly
  • Harness or connector

User informed: Yes

Sub Battery System

A

CHECK FOR DTCs

(a) Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

(b) Turn the ignition switch off and wait 6 minutes or more. (A)

(c) Turn the ignition switch to ON. (B)

(d) Turn the GTS on. (C)

(e) Wait for 10 seconds or more. (D)

(f) Read the DTCs. (E)

HINT:

  • If a DTC is output, the system is malfunctioning.
  • If a DTC is not output, perform the following procedure.

(g) Enter the following menus: Body Electrical / Sub Battery System / Utility / All Readiness. (F)

(h) Enter the DTC to be checked. (G)

(i) Check the DTC judgment result. (H)

HINT:

  • If the judgment result is NORMAL, the system is normal.
  • If the judgment result is ABNORMAL, the system is malfunctioning.
  • If the judgment result is INCOMPLETE, perform steps (A) through (H) again.

WIRING DIAGRAM

NOTICE:

  • When removing/installing the transmission floor shift assembly (shift control ECU)/shift control actuator assembly (shift actuator ECU) or disconnecting/connecting connectors, make sure there is no power* supplied.

    *: Auxiliary battery, sub battery, integrated capacitor (integration control supply), etc.

  • Before removing and installing the integrated capacitor (integration control supply), make sure the cable is disconnected from the negative (-) auxiliary battery terminal after 5 minutes or more has elapsed since the ignition switched was turned off.
  • Before performing troubleshooting, check the state of fuses and connecters of this circuit, and contact voltage of respective terminals.

PROCEDURE

  1. CHECK FOR DTC

(a) Check for DTCs.

Body Electrical > Sub Battery System > Trouble Codes

Result

Proceed to

B22937E is output

A

B22937E is not output

B

B

USE SIMULATION METHOD TO CHECK

A
  1. CHECK HARNESS AND CONNECTOR (INTEGRATED CAPACITOR (INTEGRATION CONTROL SUPPLY))

Pre-procedure1

(a) Disconnect the K26 integrated capacitor (integration control supply) connector.

Procedure1

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(K26) Click Connector(K26)

Tester Connection

Condition

Specified Condition

Result

K26-1 (BUA3) - Body ground

Ignition switch off

Below 5 V

V

Post-procedure1

(c) None

OK

REPLACE INTEGRATED CAPACITOR (INTEGRATION CONTROL SUPPLY)

NG
  1. CHECK HARNESS AND CONNECTOR (INTEGRATED CAPACITOR (INTEGRATION CONTROL SUPPLY) - BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY)

Pre-procedure1

(a) Disconnect the A3 brake booster with master cylinder assembly connector.

Procedure1

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(K26,A3) Click Connector(K26) Click Connector(A3)

Tester Connection

Condition

Specified Condition

Result

K26-1 (BUA3) or A3-2 (CBKP) - Body ground

Ignition switch off

Below 1 V

V

Post-procedure1

(c) None

OK

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

Deterioration of Sub Battery (B22E000)

DESCRIPTION

Charging of the 2nd stage power source from the auxiliary battery is performed in preparation for when an auxiliary battery power source malfunction occurs

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

Warning Indicate

DTC Output from

Priority

B22E000

Deterioration of Sub Battery

An internal malfunction of the integrated capacitor (integration control supply) is detected

(1 trip detection logic)

Integrated capacitor (integration control supply)

User informed: Yes

Sub Battery System

A

CHECK FOR DTCs

(a) Clear the DTCs (even if no DTCs are stored, perform the clear DTC procedure).

(b) Turn the ignition switch off and wait 6 minutes or more. (A)

(c) Turn the ignition switch to ON. (B)

(d) Turn the GTS on. (C)

(e) Wait for 10 seconds or more. (D)

(f) Read the DTCs. (E)

HINT:

  • If a DTC is output, the system is malfunctioning.
  • If a DTC is not output, perform the following procedure.

(g) Enter the following menus: Body Electrical / Sub Battery System / Utility / All Readiness. (F)

(h) Enter the DTC to be checked. (G)

(i) Check the DTC judgment result. (H)

HINT:

  • If the judgment result is NORMAL, the system is normal.
  • If the judgment result is ABNORMAL, the system is malfunctioning.
  • If the judgment result is INCOMPLETE, perform steps (A) through (H) again.

NOTICE:

  • When removing/installing the transmission floor shift assembly (shift control ECU)/shift control actuator assembly (shift actuator ECU) or disconnecting/connecting connectors, make sure there is no power* supplied.

    *: Auxiliary battery, sub battery, integrated capacitor (integration control supply), etc.

  • Before removing and installing the integrated capacitor (integration control supply), make sure the cable is disconnected from the negative (-) auxiliary battery terminal after 5 minutes or more has elapsed since the ignition switched was turned off.
  • Before performing troubleshooting, check the state of fuses and connecters of this circuit, and contact voltage of respective terminals.
  • If a warning message remains on the meter after clearing the DTCs, replace the integrated capacitor (integration control supply).

PROCEDURE

  1. CHECK FOR DTC

(a) Check for DTCs.

Body Electrical > Sub Battery System > Trouble Codes

Result

Proceed to

B22E000 is output

A

B22E000 is not output

B

A

REPLACE INTEGRATED CAPACITOR (INTEGRATION CONTROL SUPPLY)

B

USE SIMULATION METHOD TO CHECK