Accessory Power Outlet System

In this manual: Accessory Power Outlet System
How To Troubleshoot Ecu Controlled Systems — 1How To Use This Manual — 1Identification Information — 1Repair Instruction — 1Terms — 12zr-fxe Air Cleaner Filter Element — 12zr-fxe Auxiliary Battery — 12zr-fxe Coolant (for Engine Coolant) — 12zr-fxe Oil And Oil Filter — 12zr-fxe Spark Plug — 1Air Conditioning Filter — 1Battery Cooling Filter — 1Brake Fluid — 1Coolant (for Inverter) — 1Front Brake Flexible Hose — 1Front Disc Brake Pad — 1Front Lower Ball Joint — 1Front Wheel Alignment — 1Front Wiper Rubber — 1General Maintenance — 1M20a-fxs Air Cleaner Filter Element — 1M20a-fxs Auxiliary Battery — 1M20a-fxs Coolant (for Engine Coolant) — 1M20a-fxs Oil And Oil Filter — 1M20a-fxs Spark Plug — 1Pa10/pb10/pb12 Hybrid Transaxle Fluid — 1Q810 Hybrid Transaxle Fluid — 1Rear Brake Flexible Hose — 1Rear Disc Brake Pad — 1Rear Wheel Alignment — 1Steering Column — 1Tire And Wheel — 1Transmitter Battery — 1When Disconnecting Or Reconnecting Battery Terminal — 1When Replacing Or Removing/installing Parts — 1Automatic High Beam Main Switch — 1Automatic High Beam System — 1Driver Monitor Camera — 1Driver Monitor Camera System — 1Driver Monitor Ecu — 1Front Camera — 1Front Camera System — 1Front Radar Sensor System — 1Front Side Radar Sensor — 1Front Side Radar Sensor System — 1Millimeter Wave Radar Sensor — 1Utility — 1Advanced Park — 1Advanced Park Main Switch — 1Amplifier Antenna — 1Audio And Visual System — 1Front Door Speaker — 1Instrument Panel Speaker — 1Microphone — 1Noise Filter — 1Pillar Speaker — 1Radio Antenna Cord (for Back Door) — 1Radio Antenna Cord (for Instrument Panel) — 1Radio Antenna Cord (for Roof) — 1Radio Receiver — 1Rear Door Speaker — 1Roof Antenna — 1Stereo Component Amplifier — 1Stereo Jack Adapter Assembly — 1Window Glass Antenna Wire — 1Back-up Battery — 1Dcm(telematics Transceiver) — 1Manual(sos)switch — 1Safety Connect System — 1Telephone And Gps Antenna (for Front Side) — 1Telephone And Gps Antenna (for Roof Side) — 1Telephone And Gps Antenna Cords — 1Garage Door Opener System (for Digital Inner Mirror) — 1Garage Door Opener System (for Ec Inner Mirror) — 1Blind Spot Monitor Sensor — 1Blind Spot Monitor System — 1Clearance Warning Ecu — 1Intuitive Parking Assist System — 1Panoramic View Monitor Switch — 1Panoramic View Monitor System — 1Parking Assist Ecu — 1Parking Assist Light — 1Parking Assist Monitor System — 1Parking Support Brake System — 1Rear View Monitor System — 1Television Camera (for Front) — 1Television Camera (for Rear) — 1Television Camera (for Side) — 1Ultrasonic Sensor (for Front) — 1Ultrasonic Sensor (for Rear) — 1Brake Actuator — 1Brake Pedal Stroke Sensor — 1Electronically Controlled Brake System — 1Front Speed Sensor — 1Rear Speed Sensor (for Awd) — 1Steering Angle Sensor — 1Brake Booster — 1Brake Fluid — 1Brake Line — 1Brake Pedal — 1Brake System — 1Electric Parking Brake Actuator — 1Electric Parking Brake Switch — 1Electric Parking Brake System — 1Forced Release — 1Front Axle Hub — 1Front Axle Hub Bolt — 1Rear Axle Carrier (for 2wd) — 1Rear Axle Carrier (for Awd) — 1Rear Axle Hub (for 2wd) — 1Rear Axle Hub (for Awd) — 1Rear Axle Hub Bolt — 1Steering Knuckle — 1Drive Shaft System — 1Front Drive Shaft Assembly — 1Rear Drive Shaft Assembly — 1Combination Switch — 1Electronic Shift Lever System — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Oil Seal — 1Hybrid Transaxle System — 1Input Shaft Oil Seal — 1Motor Cable — 1Pa10 Hybrid Vehicle Transaxle — 1Pa10 Manual Parking Lock Release — 1Pa10 Oil Cooler — 1Pb10/pb12 Hybrid Vehicle Transaxle — 1Pb10/pb12 Manual Parking Lock Release — 1Pb10/pb12 Oil Cooler — 1Shift Control Actuator — 1Shift Lever — 1Shift Lever Knob — 1Differential Side Gear Shaft — 1Hybrid Transaxle Fluid — 1Hybrid Transaxle Side Gear Oil Seal — 1Motor Cable — 1Rear Traction Motor — 1Coolant (for Engine) — 1Cooling Fan Motor — 1Cooling Fan System — 1Radiator — 1Relay — 1Thermostat — 1Water Pump — 1Canister — 1Egr Cooler — 1Egr Valve — 1Emission Control System — 1Fuel Tank Cap — 1Pcv Valve — 1Purge Valve — 1Vacuum Sensor — 1Air Fuel Ratio Sensor — 1Camshaft Oil Control Valve — 1Camshaft Position Sensor — 1Crankshaft Position Sensor — 1Ecm — 1Engine Coolant Temperature Sensor — 1Heated Oxygen Sensor — 1Ignition Coil And Spark Plug — 1Ignition System — 1Knock Sensor — 1Mass Air Flow Meter — 1Relay — 1Sfi System — 1Throttle Body — 1Camshaft — 1Cylinder Block — 1Cylinder Head — 1Cylinder Head Gasket — 1Engine — 1Engine Assembly — 1Engine Unit — 1Front Crankshaft Oil Seal — 1Rear Crankshaft Oil Seal — 1Fuel Filter — 1Fuel Injector — 1Fuel Pressure Regulator — 1Fuel Pump — 1Fuel Sender Gauge Assembly — 1Fuel System — 1Fuel Tank — 1Air Cleaner Filter Element — 1Exhaust Manifold — 1Exhaust Pipe — 1Intake Manifold — 1Intake System — 1Lubrication System — 1Oil And Oil Filter — 1Oil Pan And Oil Level Sensor — 1Oil Pressure Switch — 1Oil Pump — 1Accelerator Pedal Sensor — 1Battery Blower (for Hev Model) — 1Battery Ecu (for Hev Model) — 1Battery Ecu (for Phev Model) — 1Battery Voltage Sensor (for Phev Model) — 1Charge Cable (for Phev Model) — 1Charge Indicator (for Phev Model) — 1Charge Inlet (for Phev Model) — 1Combination Switch — 1Coolant (for Inverter) — 1Cooler (for Phev Model) — 1Electric Vehicle Charger Assembly (for Phev Model) — 1Frame Wire (for Hev Model) — 1Frame Wire (for Phev Model) — 1Heater Relay (for Phev Model) — 1Hv Battery (for Hev Model) — 1Hv Battery (for Phev Model) — 1Hv Battery Heater (for Phev Model) — 1Hv Battery Stack (for Phev Model) — 1Hv Relay Assembly (for Hev Model) — 1Hv Relay Assembly (for Phev Model) — 1Hybrid Battery System (for 2zr-fxe) — 1Hybrid Battery System (for M20a-fxs) — 1Hybrid Battery System (for Phev Model) — 1Hybrid Vehicle Control Ecu — 1Inverter With Converter (for Hev Model) — 1Motor Generator Control System (for 2zr-fxe) — 1Plug-in Charge Control System (for Phev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Service Plug Grip (for Hev Model) — 1Sub Radiator — 1Water Pump With Motor — 1Auxiliary Battery — 1Battery Current Sensor — 1Charging System — 1Solar Charging System — 1Solar Control Unit — 1Solar Roof — 1Can Communication System (for Hev Model) — 1Lin Communication System — 1Network Gateway Ecu — 1Integration Control Supply — 1Main Body Ecu — 1Power Integration System — 1Sub Battery System — 1Power Steering Ecu — 1Power Steering System — 1Heated Steering Wheel Controller — 1Heated Steering Wheel System — 1Steering Column Assembly — 1Steering Heater Switch — 1Steering Pad Switch — 1Steering System — 1Steering Wheel — 1Front Lower Ball Joint — 1Front Lower Suspension Arm (for 2zr-fxe Lh Side) — 1Front Lower Suspension Arm (for 2zr-fxe Rh Side) — 1Front Lower Suspension Arm (for M20a-fxs) — 1Front Shock Absorber — 1Front Stabilizer Bar — 1Front Suspension Member — 1Rear Coil Spring — 1Rear Lower Arm (for Awd Lh Side) — 1Rear Lower Arm (for Awd Rh Side) — 1Rear Lower Arm (for Hev Model 2wd) — 1Rear Lower Arm (for Phev Model) — 1Rear Shock Absorber — 1Rear Stabilizer Bar — 1Rear Suspension Member (for 2wd) — 1Rear Suspension Member (for Awd) — 1Rear Trailing Arm — 1Rear Upper Arm — 1Tire And Wheel System — 1Tire Repair Seal — 1Tire Pressure Warning Receiver — 1Tire Pressure Warning System — 1Tire Pressure Warning Valve — 1Acoustic Vehicle Alerting System — 1Vehicle Approaching Speaker — 1Vehicle Approaching Speaker Ecu — 1Back Door — 1Back Door Closer Ecu — 1Back Door Opener Switch — 1Back Door Support — 1Back Door Weatherstrip — 1Charge Lid Courtesy Switch — 1Charge Lid Opener Motor Assembly — 1Charge Lid Opener System — 1Charge Lid Opener Unit — 1Front Door — 1Front Door Opening Trim Weatherstrip — 1Fuel Lid Opener Motor Assembly — 1Fuel Lid Opener Switch — 1Fuel Lid Opener System — 1Hood — 1Hood Lock Control Cable Assembly — 1Power Back Door Closer Switch — 1Power Back Door Control Switch — 1Power Back Door Drive Unit — 1Power Back Door System — 1Power Back Door Touch Sensor — 1Power Back Door Warning Buzzer — 1Rear Door — 1Rear Door Opening Trim Weatherstrip — 1Reserve Lock Switch — 1Front Bumper — 1Front Door Belt Moulding — 1Front Door Window Frame Moulding — 1Front Fender — 1Front Pillar Upper Cover — 1Grille Shutter — 1Grille Shutter System — 1Name Plate — 1Quarter Garnish — 1Rear Bumper — 1Rear Door Belt Moulding — 1Rear Door Window Frame Moulding — 1Rear Wheel House Plate — 1Rocker Panel Moulding — 1Roof Drip Side Finish Moulding — 1Roof Garnish — 1Wheel Opening Moulding (for Front Side) — 1Wheel Opening Moulding (for Rear Side) — 1Windshield Outside Moulding — 1Horn — 1Horn System — 1Relay — 1Automatic Light Control Sensor — 1Back-up Light Assembly — 1Charge Lid Light — 1Front Marker Light — 1Hazard Warning Switch — 1Headlight Assembly — 1Headlight Dimmer Switch — 1Headlight Leveling Switch — 1High Mounted Stop Light Assembly — 1Illumination Light Assembly — 1License Plate Light Assembly — 1Lighting System — 1Rear Combination Light Assembly — 1Rear Light Assembly — 1Rear Side Marker Light Assembly — 1Relay — 1Side Turn Signal Light Assembly — 1Stop Light Switch — 1Switch Housing — 1Outer Mirror Switch — 1Outer Rear View Mirror — 1Outer Rear View Mirror Cover — 1Outer Rear View Mirror Glass — 1Power Mirror Control System — 1Back Door Glass — 1Front Passenger Side Power Window Switch — 1Power Window Control System — 1Power Window Master Switch — 1Power Window Regulator Motor (for Front Door) — 1Power Window Regulator Motor (for Rear Door) — 1Rear Power Window Switch — 1Relay — 1Roof Window Fix Glass — 1Window Defogger System — 1Windshield Deicer Switch — 1Windshield Deicer System — 1Windshield Glass — 1Front Wiper Motor — 1Rain Sensor — 1Relay — 1Washer Motor — 1Washer Nozzle (for Front Side) — 1Washer Nozzle (for Rear Television Camera) — 1Wiper And Washer System — 1Wiper Ecu — 1Wiper Switch — 1Back Door Lock — 1Door Control Receiver — 1Door Control Switch — 1Door Control Transmitter — 1Door Lock Release Motor (for Rear Side) — 1Door Outside Handle (for Rear Side) — 1Front Door Lock — 1Power Door Lock Control System — 1Rear Door Lock — 1Transmitter Battery — 1Wireless Door Lock Control System — 1Accumulator — 1Air Conditioning Amplifier — 1Air Conditioning Panel — 1Air Conditioning Pressure Sensor — 1Air Conditioning Unit — 1Ambient Temperature Sensor — 1Blower Unit — 1Condenser (for Hev Model) — 1Condenser (for Phev Model) — 1Discharge Temperature Sensor — 1Electric Expansion Valve (cooling) — 1Electric Expansion Valve (heating) — 1Evaporator Pipe Temperature Sensor — 1Evaporator Pressure Regulator — 1Front Blower Motor — 1Front Evaporator Front Solenoid Valve — 1Air Conditioning System (for Hev Model) — 1Front Evaporator Temperature Sensor — 1Heat Exchanger Temperature Sensor — 1Heat Pump Ecu — 1High Pressure Magnetic Valve — 1Humidity Sensor — 1Internal Condenser Temperature Sensor — 1Low Pressure Magnetic Valve — 1Refrigerant (for Hfc-134a(r134a)) — 1Refrigerant Line (for Hev Model) — 1Refrigerant Line (for Phev Model) — 1Relay — 1Room Temperature Sensor — 1Solar Sensor — 1Floor Carpet — 1Front Console Box — 1Instrument Panel Safety Pad — 1Roof Headlining — 1Roof Sunshade — 1Ambient Light (for Driver Side) — 1Ambient Light (for Front Passenger Side) — 1Back Door Courtesy Switch — 1Footwell Light — 1Glove Box Light — 1Lighting System — 1Luggage Compartment Room Light — 1Personal Light — 1Room Light — 1Vanity Light — 1Vanity Light Switch — 1Combination Meter — 1Meter / Gauge System — 1Trip Switch — 1Digital Inner Mirror — 1Digital Rear-view Mirror System — 1Inner Mirror Monitor Camera — 1Inner Rear View Mirror (w/o Ec Mirror) — 1Accessory Power Outlet System — 1Power Outlet Socket (for Console Box Front Side) — 1Power Outlet Socket (for Console Box Rear Side) — 1Power Outlet Socket (for Console Box) — 1Power Outlet Socket (for Luggage Compartment) — 1Power Outlet Switch — 1Wireless Charger Assembly — 1Wireless Charging System — 1Climate Control Seat System — 1Front Power Seat Control System (w/ Memory) — 1Front Power Seat Motor Assembly — 1Front Seat Assembly (for Power Seat) — 1Front Seat Cushion Heater (for Power Seat) — 1Front Seatback Heater (for Power Seat) — 1Lumbar Support Adjuster Assembly — 1Power Seat Control Ecu — 1Power Seat Switch — 1Power Seat Track Rail Assembly — 1Rear Seat Assembly — 1Rear Seat Cushion Heater — 1Rear Seat Reminder System — 1Rear Seatback Heater — 1Seat Heater Control — 1Seat Heater Switch (for Front Seat) — 1Seat Heater Switch (for Rear Side) — 1Seat Heater System — 1Seat Memory Switch — 1Child Restraint Seat Anchor Bracket — 1Front Seat Inner Belt Assembly — 1Front Seat Outer Belt Assembly — 1Occupant Detection Sensor (for Front Passenger Side) — 1Rear Center Seat Outer Belt Assembly — 1Rear Seat Inner Belt Assembly (for Rh Side) — 1Rear Seat Outer Belt Assembly — 1Seat Belt Warning System (w/ Occupant Classification System) — 1Tongue Plate Stopper — 1Airbag System — 1Center Airbag Sensor Assembly — 1Curtain Shield Airbag Assembly — 1Front Airbag Sensor — 1Front Passenger Airbag Assembly — 1Front Seat Side Airbag Assembly — 1Inspection After Collision — 1Knee Airbag Assembly — 1Occupant Classification System — 1Rear Seat Side Airbag Assembly — 1Side Airbag Sensor (for Center Pillar) — 1Side Airbag Sensor (for Front Door) — 1Spiral Cable — 1Steering Pad — 1Certification Ecu — 1Digital Key Ecu — 1Digital Key Receiver (for Front Floor) — 1Digital Key Receiver (for Outside Luggage Compartment) — 1Digital Key Receiver (for Rear Door) — 1Digital Key System — 1Electrical Key Oscillator (for Front Floor) — 1Electrical Key Oscillator (for Outside Luggage Compartment) — 1Electrical Key Oscillator (for Rear Floor) — 1Engine Hood Courtesy Switch — 1Id Code Box — 1Smart Key System (for Start Function) — 1
~17min read
  • Precaution
  • Parts Location
  • System Diagram
  • System Description
  • How To Proceed With Troubleshooting
  • Problem Symptoms Table
  • Terminals Of Ecu
  • Data List / Active Test
  • Indicator does not Illuminate when Accessory Power Outlet System Main Switch Operated
  • Accessory Power Outlet System does not Operate

Precaution

PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

After the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.

Click here

HINT:

When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.

Click here

PRECAUTIONS WHEN INSPECTING HYBRID CONTROL SYSTEM

Click here

PRECAUTIONS WHEN INSPECTING ACCESSORY POWER OUTLET SYSTEM

(a) When a device connected to the accessory power outlet system does not operate, refer to the owner's manual of the device and confirm that the device can be powered by the accessory power outlet system.

(b) Make sure that all devices connected across all accessory power outlets (AC120 V/1500 W) have a maximum combined power consumption of 1500 W or less.

(c) If the temperature inside the Toyota Prius vehicle is high, the accessory power outlet system may stop power output due to operation of the over-heat protection circuit.

HINT:

To restart power output, use the air conditioning system to sufficiently ventilate or cool the interior, and then press the power outlet switch again.

(d) Even if the hybrid control system is not malfunctioning, the fail-safe function operates and the electric Toyota Prius vehicle charger assembly sends an operation prohibition signal to stop power output if any of the following conditions are met:

  • The HV battery SOC is low.
  • The HV battery temperature is low or high.
  • The HV battery voltage is low.
  • AC output current is leaking

(e) When the power output stop is not caused by leakage, it is possible to use the power outlet sockets after clearing the cause by turning the power outlet switch on again.

HINT:

When a power output stop is caused by leakage, it is possible to use the power outlet sockets after clearing the cause by turning the ignition switch off and then to ON (READY), and then turning the power outlet switch on again.

Parts Location

PARTS LOCATION

ILLUSTRATION

*1

REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY

*2

BATTERY ECU ASSEMBLY

*3

NO. 1 TRACTION BATTERY DEVICE BOX ASSEMBLY

*4

ELECTRIC Toyota Prius Vehicle CHARGER ASSEMBLY

*5

PLUGIN CHARGE CONTROL ECU ASSEMBLY

-

-

ILLUSTRATION

*1

CERTIFICATION ECU (SMART KEY ECU ASSEMBLY)

*2

POWER OUTLET SWITCH

*3

HYBRID Toyota Prius Vehicle CONTROL ECU

*4

CENTER POWER OUTLET SOCKET ASSEMBLY

System Diagram

SYSTEM DIAGRAM

System Description

SYSTEM DESCRIPTION

ACCESSORY POWER OUTLET SYSTEM

(a) Accessory Power Outlet System Description

(1) The electric vehicle charger assembly converts voltage from the HV battery to a standard AC120 V (1500 W max) output.

(2) The accessory power outlet system can be operated when the power outlet switch is turned on with the ignition switch ON (READY).

How To Proceed With Troubleshooting

HINT:

Use the following procedure to troubleshoot the accessory power outlet system.

PROCEDURE

  1. VEHICLE BROUGHT TO WORKSHOP

NEXT
  1. CUSTOMER PROBLEM ANALYSIS

HINT:

  • In troubleshooting, confirm that the problem symptoms have been accurately identified. Preconceptions should be discarded in order to make an accurate judgment. To clearly understand what the problem symptoms are, it is extremely important to ask the customer about the problem and the conditions at the time the malfunction occurred.
  • Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
  • The following 5 items are important points for problem analysis:

    What

    Toyota Prius Vehicle model, system name

    When

    Date, time, occurrence frequency

    Where

    Road conditions

    Under what conditions?

    Driving conditions, weather conditions

    How did it happen?

    Problem symptoms

NEXT
  1. PRE-CHECK

(a) Measure the auxiliary battery voltage with the ignition switch off.

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.

(b) Check the fuses and relays.

(c) Check the connector connections and terminals to make sure that there are no abnormalities such as loose connections, deformation, etc.

NEXT
  1. CHECK FOR DTCs

(a) Using the GTS, check for DTCs.

Powertrain > Hybrid Control > Trouble Codes

Result

Proceed to

DTCs are not output

A

DTCs are output

B

B

GO TO HYBRID Toyota Prius Vehicle CONTROL SYSTEM

A
  1. PROBLEM SYMPTOMS TABLE

(a) Refer to Problem Symptoms Table.

Click here

Result

Proceed to

Fault is not listed in Problem Symptoms Table

A

Fault is listed in Problem Symptoms Table

B

B

GO TO PROBLEM SYMPTOMS TABLE

A
  1. OVERALL ANALYSIS AND TROUBLESHOOTING

(a) Terminals of ECU.

Click here

(b) Data List.

Click here

NEXT
  1. REPAIR OR REPLACE

NEXT
  1. CONFIRMATION TEST

NEXT

END

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

Accessory Power Outlet System

Symptom

Suspected Area

Link

A device connected to the accessory power outlet system does not operate correctly (device operates correctly using a household power outlet)*

Refer to the owner's manual of the device and confirm that the device can be powered by the accessory power outlet system

-

Proceed to "Accessory Power Outlet System does not Operate"

A device connected to the accessory power outlet system does not operate correctly (device operates correctly using a household power outlet)

Refer to the owner's manual of the device and confirm that the device can be powered by the accessory power outlet system

-

Electric Toyota Prius vehicle charger assembly

The indicator does not illuminate even though the accessory power outlet system is operating (accessory power outlet system can still be used correctly)

Proceed to "Indicator does not Illuminate when Accessory Power Outlet System Main Switch Operated"

The power outlet switch illumination does not illuminate (illumination of other switches illuminate correctly)

Power outlet switch

Harness or connector

-

HINT:

*: Symptom for a situation when the combined power consumption of connected devices exceeds 1500W or the Toyota Prius vehicle is malfunctioning.

Terminals Of Ecu

TERMINALS OF ECU

ELECTRIC VEHICLE CHARGER ASSEMBLY

(a) Disconnect the R73 electric vehicle charger assembly connector.

(b) Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

R73-8 (AMD2) - Body ground

Power source

Ignition switch ON

11 to 14 V

Ignition switch off

Below 1 V

HYBRID Toyota Prius Vehicle CONTROL ECU

(a) Disconnect the K11 hybrid vehicle control ECU connector.

(b) Measure the voltage according to the value(s) in the table below.

Terminal No. (Symbol)

Terminal Description

Condition

Specified Condition

K11-35 (HCIV) - Body ground

Activate/Deactivate signal

Ignition switch ON, power outlet switch OFF

11 to 14 V

Ignition switch ON, power outlet switch ON

Below 1 V

PLUGIN CHARGE CONTROL ECU ASSEMBLY

Click here

Data List / Active Test

DATA LIST / ACTIVE TEST

DATA LIST

(a) Read the Data List according to the display on the GTS.

Powertrain > Hybrid Control > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

AC100V Accessory Outlet Switch

Status of power outlet switch

ON / OFF

ON: Power outlet switch not pushed

OFF: Power outlet switch pushed

  • HCIV terminal

Indicator does not Illuminate when Accessory Power Outlet System Main Switch Operated

DESCRIPTION

The plugin charge control ECU assembly receives operation signals from the hybrid vehicle control ECU and illuminates the indicator on the power outlet switch.

WIRING DIAGRAM

NOTICE:

Inspect the fuses for circuits related to this system before performing the following procedure.

PROCEDURE

  1. CHECK HARNESS AND CONNECTOR

(a) Disconnect the K32 power outlet switch connector.

*a

Front view of wire harness connector

(to Power Outlet Switch)

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(K32) Click Connector(K32)

Tester Connection

Condition

Specified Condition

K32-3 (IG) - Body ground

Ignition switch off

Below 1 V

Ignition switch ON

11 to 14 V

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. INSPECT POWER OUTLET SWITCH

Click here

NG

REPLACE POWER OUTLET SWITCH

OK
  1. CHECK HARNESS AND CONNECTOR

(a) Disconnect the K32 power outlet switch connector.

(b) Disconnect the R62 plugin charge control ECU assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(K32,R62) Click Connector(K32) Click Connector(R62)

Tester Connection

Condition

Specified Condition

K32-4 (IND) - R62-24 (ACLP)

Always

Below 1 Ω

K32-4 (IND) or R62-24 (ACLP) - Body ground

Always

10 kΩ or higher

OK

REPLACE PLUGIN CHARGE CONTROL ECU ASSEMBLY

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

Accessory Power Outlet System does not Operate

DESCRIPTION

The electric vehicle charger assembly converts DC from the HV battery to AC voltage using the hybrid control system.

When the power outlet switch is ON with the ignition switch ON (READY), household electrical devices up to 1500 W can be used.

WIRING DIAGRAM

CAUTION:

Precautions for hybrid control system.

Click here

NOTICE:

  • High voltage is supplied to the accessory power outlet system from the HV battery.

    Perform the inspections in How to Proceed with Troubleshooting to confirm that there are no malfunctions in the hybrid control system before performing this troubleshooting procedure.

    Click here

  • Inspect the fuses for circuits related to this system before performing the following procedure.
  • Before replacing the hybrid Toyota Prius vehicle control ECU, refer to Registration.

    Click here

HINT:

Even if the hybrid control system is not malfunctioning, the fail-safe function operates depending on the state of the HV battery and hybrid control system, and the hybrid Toyota Prius vehicle control ECU sends an operation prohibition signal to stop power output.

For operation prohibition conditions, refer to

PROCEDURE

  1. CHECK DTC OUTPUT (HEALTH CHECK)

(a) Enter the following menus: Health Check.

(b) Check DTCs.

Result

Proceed to

No DTCs are output

A

DTCs are output

B

(c) Turn the ignition switch off.

B

GO TO DTC CHART

A
  1. CHECK FOR Toyota Prius Vehicle CONTROL HISTORY

(a) Enter the following menus.

Powertrain > Plug-in Control > Utility

Vehicle Control History (RoB)

(b) Check for Toyota Prius Vehicle Control History (RoB) except AC Charging History (X10F0).

HINT:

  • Vehicle Control History (RoB) items AC Charging History (X10F0) is stored each time plug-in charging is performed, and is also stored when plug-in charging completes without error from start to finish. For this reason, the fact that they are output does not directly indicate any malfunction or problem.
  • If AC charging has not started, Toyota Prius Vehicle Control History (RoB) will not be stored.(Except if a power outage occurred before AC charging could start.)
  • If Vehicle Control History (RoB) has been stored, it can be determined that AC charging has been performed.

Result

Proceed to

Toyota Prius Vehicle Control History (RoB) not stored

A

Vehicle Control History (RoB) stored

B

(c) Turn the ignition switch off.

B

GO TO Toyota Prius Vehicle CONTROL HISTORY

A
  1. READ VALUE USING GTS

(a) Confirm that the value of the following Data List item changes correctly in accordance with the operation of the power outlet switch.

Powertrain > Hybrid Control > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

AC100V Accessory Outlet Switch

Power outlet switch

ON / OFF

ON: Power outlet switch not pushed

OFF: Power outlet switch pushed

HCIV terminal

Powertrain > Hybrid Control > Data List

AC100V Accessory Outlet Switch

OK:

The Data List item changes correctly in accordance with the operation of the power outlet switch.

NG

GO TO STEP 14

OK
  1. INSPECT CENTER POWER OUTLET SOCKET ASSEMBLY

Click here

NG

REPLACE CENTER POWER OUTLET SOCKET ASSEMBLY

OK
  1. INSPECT REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY

Click here

NG

REPLACE REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY

OK
  1. CHECK HARNESS AND CONNECTOR (CENTER POWER OUTLET SOCKET ASSEMBLY - ELECTRIC Toyota Prius Vehicle CHARGER ASSEMBLY)

(a) Disconnect the R78 electric vehicle charger assembly connector.

(b) Disconnect the R35 center power outlet socket assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(R35,R78) Click Connector(R35) Click Connector(R78)

Tester Connection

Condition

Specified Condition

R35-1 (VV ) - R78-1 (AC1)

Always

Below 1 Ω

R35-4 (VV-) - R78-2 (AC2)

Always

Below 1 Ω

R35-1 (VV ) or R78-1 (AC1) - Body ground

Always

10 kΩ or higher

R35-4 (VV-) or R78-2 (AC2) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK HARNESS AND CONNECTOR (REAR NO. 1 POWER OUTLET SOCKET ASSEMBLY - ELECTRIC Toyota Prius Vehicle CHARGER ASSEMBLY)

(a) Disconnect the R78 electric vehicle charger assembly connector.

(b) Disconnect the R83 rear No. 1 power outlet socket assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(R83,R78) Click Connector(R83) Click Connector(R78)

Tester Connection

Condition

Specified Condition

R83-1 (ACC1) - R78-1 (AC1)

Always

Below 1 Ω

R83-2 (ACC2) - R78-2 (AC2)

Always

Below 1 Ω

R83-1 (ACC1) or R78-1 (AC1) - Body ground

Always

10 kΩ or higher

R83-2 (ACC2) or R78-2 (AC2) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK HARNESS AND CONNECTOR (POWER SOURCE - ELECTRIC Toyota Prius Vehicle CHARGER ASSEMBLY)

(a) Disconnect the R73 electric vehicle charger assembly connector.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(R73) Click Connector(R73)

Tester Connection

Condition

Specified Condition

R73-8 (AMD2) - Body ground

Ignition switch off

Below 1 V

Ignition switch ON

11 to 14 V

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK HYBRID Toyota Prius Vehicle CONTROL ECU (Operation signal)

(a) Connect the K11 hybrid vehicle control ECU connector.

(b) Measure the voltage according to the value(s) in the table below.

Standard Voltage:

Click Location & Routing(K11) Click Connector(K11)

Tester Connection

Condition

Specified Condition

K11-35 (HCIV) - Body ground

  • Ignition switch ON
  • Power outlet switch OFF

11 V to 14 V

  • Ignition switch ON
  • Power outlet switch OFF

Below 1 V

HINT:

  • Even if the hybrid control system is not malfunctioning, the fail-safe function operates depending on the state of the HV battery and hybrid control system, and the hybrid Toyota Prius vehicle control ECU sends an operation prohibition signal to stop power output.

    (For operation prohibition conditions, refer to )

  • If the voltage at terminal K11-35 (HCIV) does not change when the power outlet switch is operated, turn the ignition switch to ON (READY) with the shift lever in P and the accelerator pedal released, and wait for the HV battery SOC to recover. With all recovery conditions met, push the power outlet switch and perform the inspection again.

    (For operation prohibition conditions, refer to )

  • If the voltage at terminal K11-35 (HCIV) does not change when the power outlet switch assembly is operated again, proceed to "NG".
NG

REPLACE HYBRID Toyota Prius Vehicle CONTROL ECU

OK
  1. CHECK HARNESS AND CONNECTOR (NO. 1 TRACTION BATTERY DEVICE BOX ASSEMBLY - ELECTRIC Toyota Prius Vehicle CHARGER ASSEMBLY)

(a) Disconnect the w3 and w4 No. 1 traction battery device box assembly connector.

(b) Disconnect the e3 electric vehicle charger assembly connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(w3,e3,w4) Click Connector(w3) Click Connector(e3) Click Connector(w4)

Tester Connection

Condition

Specified Condition

w3-1 (DCHB) - e3-1 (DCHB)

Always

Below 1 Ω

w4-1 (DCHG) - e3-2 (DCHG)

Always

Below 1 Ω

w3-1 (DCHB) or e3-1 (DCHB) - Body ground

Always

10 kΩ or higher

w4-1 (DCHG) - e3-2 (DCHG) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK HARNESS AND CONNECTOR (NO. 1 TRACTION BATTERY DEVICE BOX ASSEMBLY - HYBRID Toyota Prius Vehicle CONTROL ECU)

(a) Disconnect the x12 and x13 No. 1 traction battery device box assembly connector.

(b) Disconnect the K11 hybrid vehicle control ECU connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(x12,K11,x13) Click Connector(x12) Click Connector(K11) Click Connector(x13)

Tester Connection

Condition

Specified Condition

x12-1 (SMRB) - K11-3 (SMRB)

Always

Below 1 Ω

x12-1 (SMRB) or K11-3 (SMRB) - Body ground

Always

10 kΩ or higher

x13-4 (SMRG) - K11-27 (SMRG)

Always

Below 1 Ω

x13-4 (SMRG) or K11-27 (SMRG) - Body ground

Always

10 kΩ or higher

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK HARNESS AND CONNECTOR (NO. 1 TRACTION BATTERY DEVICE BOX ASSEMBLY - BODY GROUND)

(a) Disconnect the x12 and x13 No. 1 traction battery device box assembly connector.

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(x12,x13) Click Connector(x12) Click Connector(x13)

Tester Connection

Condition

Specified Condition

x12-2 (GND) - Body ground

Always

Below 1 Ω

x13-3 (GND8) - Body ground

Always

Below 1 Ω

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. INSPECT NO. 1 TRACTION BATTERY DEVICE BOX ASSEMBLY

Click here

OK

REPLACE HYBRID Toyota Prius Vehicle CONTROL ECU

NG

REPLACE NO. 1 TRACTION BATTERY DEVICE BOX ASSEMBLY

  1. INSPECT POWER OUTLET SWITCH

Click here

NG

REPLACE POWER OUTLET SWITCH

OK
  1. CHECK HARNESS AND CONNECTOR (POWER OUTLET SWITCH - BODY GROUND)

(a) Disconnect the K32 power outlet switch connector.

*a

Front view of wire harness connector

(to Power Outlet Switch)

(b) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(K32) Click Connector(K32)

Tester Connection

Condition

Specified Condition

K32-2 (E) - Body ground

Always

Below 1 Ω

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR

OK
  1. CHECK HARNESS AND CONNECTOR (POWER OUTLET SWITCH - HYBRID Toyota Prius Vehicle CONTROL ECU)

(a) Disconnect the K32 power outlet switch connector.

(b) Disconnect the K11 hybrid vehicle control ECU connector.

(c) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Click Location & Routing(K32,K11) Click Connector(K32) Click Connector(K11)

Tester Connection

Condition

Specified Condition

K32-5 (INV) - K11-35 (HCIV)

Always

Below 1 Ω

K32-5 (INV) or K11-35 (HCIV) - Body ground

Always

10 kΩ or higher

OK

REPLACE HYBRID Toyota Prius Vehicle CONTROL ECU

NG

REPAIR OR REPLACE HARNESS OR CONNECTOR