Clearance Warning Ecu
- Removal
- Installation
Removal
REMOVAL
The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during clearance warning ECU assembly removal/installation are shown below.
Necessary Procedures After Parts Removed/Installed/ReplacedReplaced Part or Performed Procedure | Necessary Procedures | Effect/Inoperative Function When Necessary Procedures are not Performed | Link |
|---|---|---|---|
Clearance warning ECU assembly |
Update ECU security key |
Toyota Prius Vehicle Control History (RoB) are stored |
|
w/ Parking Support Brake System:
|
|
||
Advanced Park |
|||
w/o Parking Support Brake System:
|
Intuitive Parking Assist Sensor System |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
FRONT DOOR SCUFF PLATE LH |
67914 |
- |
- |
- |
2 |
COWL SIDE TRIM BOARD LH |
62112 |
- |
- |
- |
3 |
NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
55606 |
- |
- |
- |
*A |
w/ Knee Airbag |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
4 |
LOWER CENTER INSTRUMENT PANEL FINISH PANEL |
55434B |
- |
- |
- |
5 |
LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
55406B |
- |
- |
- |
6 |
INSTRUMENT SIDE PANEL RH |
55317A |
- |
- |
- |
7 |
NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY |
- |
- |
- |
- |
8 |
FRONT DOOR SCUFF PLATE RH |
67913 |
- |
- |
- |
9 |
COWL SIDE TRIM BOARD RH |
62111C |
- |
- |
- |
10 |
NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
55607 |
- |
- |
- |
11 |
GLOVE COMPARTMENT DOOR ASSEMBLY |
55550 |
- |
- |
|
12 |
LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
55303B |
- |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
13 |
CLEARANCE WARNING ECU ASSEMBLY |
89340A |
- |
- |
|
PROCEDURE
1. REMOVE FRONT DOOR SCUFF PLATE LH (w/ Knee Airbag)
Click here
![]()
2. REMOVE COWL SIDE TRIM BOARD LH (w/ Knee Airbag)
Click here
![]()
3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
Click here
![]()
4. REMOVE LOWER CENTER INSTRUMENT PANEL FINISH PANEL
Click here
![]()
5. REMOVE LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
![]()
6. REMOVE INSTRUMENT SIDE PANEL RH
Click here
![]()
7. REMOVE NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY
Click here
![]()
8. REMOVE FRONT DOOR SCUFF PLATE RH
(a) Use the same procedure as for the LH side.
Click here
![]()
9. REMOVE COWL SIDE TRIM BOARD RH
(a) Use the same procedure as for the LH side.
Click here
![]()
10. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
![]()
11. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
![]() |
Click here |
12. REMOVE LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Click here
![]()
13. REMOVE CLEARANCE WARNING ECU ASSEMBLY

![]() |
Remove in this Direction |
- |
- |
(1) Disengage the 2 claws and pull down the 2 lock levers to disconnect the 2 connectors as shown in the illustration.
(2) Disconnect the connector.
(3) Disengage the clamp.
(4) Using a screwdriver, disengage the claw as shown in the illustration.
(5) Using a screwdriver, disengage the claw and remove the clearance warning ECU assembly as shown in the illustration.
Installation
INSTALLATION
NOTICE:
- After replacing the clearance warning ECU assembly, make sure to perform update ECU security key.
- After performing the update ECU security key procedure, make sure to perform the initialization procedure for when the cable has been disconnected and reconnected to the negative (-) battery terminal.

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
CLEARANCE WARNING ECU ASSEMBLY |
89340A |
- |
- |
|

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
2 |
LOWER INSTRUMENT PANEL SUB-ASSEMBLY |
55303B |
- |
- |
- |
3 |
GLOVE COMPARTMENT DOOR ASSEMBLY |
55550 |
- |
- |
- |
4 |
NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
55607 |
- |
- |
- |
5 |
COWL SIDE TRIM BOARD RH |
62111C |
- |
- |
- |
6 |
FRONT DOOR SCUFF PLATE RH |
67913 |
- |
- |
- |
7 |
NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY |
- |
- |
- |
- |
8 |
INSTRUMENT SIDE PANEL RH |
55317A |
- |
- |
- |
9 |
LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY |
55406B |
- |
- |
- |
10 |
LOWER CENTER INSTRUMENT PANEL FINISH PANEL |
55434B |
- |
- |
- |
![]() |
N*m (kgf*cm, ft.*lbf): Specified torque |
- |
- |

Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
11 |
NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY |
55606 |
- |
- |
- |
12 |
COWL SIDE TRIM BOARD LH |
62112 |
- |
- |
- |
13 |
FRONT DOOR SCUFF PLATE LH |
67914 |
- |
- |
- |
14 |
UPDATE ECU SECURITY KEY |
- |
- |
- |
|
15 |
PERFORM CALIBRATION |
- |
- |
- |
|
PROCEDURE
1. INSTALL CLEARANCE WARNING ECU ASSEMBLY

![]() |
Install in this Direction |
- |
- |
(1) Engage the 2 claws to install the clearance warning ECU assembly.
(2) Engage the clamp.
(3) Connect the connector.
(4) Connect the 2 connectors and push down the 2 lock levers to engage the 2 claws and lock the connector as shown in the illustration.
NOTICE:
Be sure to connect the connector securely.
2. INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY
Click here ![]()
3. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
5. INSTALL COWL SIDE TRIM BOARD RH
6. INSTALL FRONT DOOR SCUFF PLATE RH
7. INSTALL NO. 2 INSTRUMENT PANEL GARNISH SUB-ASSEMBLY WITH AIR CONDITIONING CONTROL ASSEMBLY
8. INSTALL INSTRUMENT SIDE PANEL RH
9. INSTALL LOWER CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
10. INSTALL LOWER CENTER INSTRUMENT PANEL FINISH PANEL
11. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (w/ Knee Airbag)
12. INSTALL COWL SIDE TRIM BOARD LH (w/ Knee Airbag)
13. INSTALL FRONT DOOR SCUFF PLATE LH (w/ Knee Airbag)
14. UPDATE ECU SECURITY KEY
Click here ![]()
15. PERFORM CALIBRATION
(a) w/ Parking Support Brake System:
(1) Click here ![]()
(2) w/ Advanced Park:
Click here ![]()
(b) w/o Parking Support Brake System:
Click here ![]()






























