Battery Cooling Filter
Removal
REMOVAL
COMPONENTS (REMOVAL)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
REAR UNDER SIDE COVER LH |
76974E |
- |
- |
- |
2 |
NO. 1 HV BATTERY INTAKE FILTER |
G92DH |
- |
- |
|
PROCEDURE
1. REMOVE REAR UNDER SIDE COVER LH
2. REMOVE NO. 1 HV BATTERY INTAKE FILTER
![]() |
HINT: If the message "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, inspect the No. 1 HV battery intake filter. Click here |
Inspection
INSPECTION
PROCEDURE
1. INSPECT NO. 1 HV BATTERY INTAKE FILTER
HINT:
If the vehicle is used in an area with heavy traffic or excessive dust, or if the rear seat is used frequently, the No. 1 HV battery intake filter may be clogged. Clean or replace the No. 1 HV battery intake filter as necessary.
(a) Visually inspect the No. 1 HV battery intake filter.
Standard:
No clogs or damage.
NOTICE:
- If the No. 1 HV battery intake filter is damaged, replace it with a new one.
- If the No. 1 HV battery intake filter is damaged, check if there is foreign matter inside the battery cooling blower assembly. Clean or replace the battery cooling blower assembly as necessary.
- Do not clean the No. 1 HV battery intake filter with it installed to the vehicle.
- Make sure to hold the fan of the battery cooling blower assembly when cleaning the battery cooling blower assembly with compressed air. If the fan is allowed to rotate, voltage will be generated, which may damage the battery cooling blower assembly circuit.
If the result is not as specified, replace the No. 1 HV battery intake filter.
2. CLEAN NO. 1 HV BATTERY INTAKE FILTER
(a) Clean the No. 1 HV battery intake filter by blowing compressed air as shown in the illustration. NOTICE:
|
|
Installation
INSTALLATION
COMPONENTS (INSTALLATION)
Procedure | Part Name Code | ![]() | ![]() | ![]() |
|
|---|---|---|---|---|---|
1 |
NO. 1 HV BATTERY INTAKE FILTER |
G92DH |
- |
- |
- |
2 |
REAR UNDER SIDE COVER LH |
76974E |
- |
- |
- |
3 |
CLEAR DTC |
- |
- |
- |
|
PROCEDURE
1. INSTALL NO. 1 HV BATTERY INTAKE FILTER
2. INSTALL REAR UNDER SIDE COVER LH
3. CLEAR DTC
![]() |
HINT: If the message "Maintenance Required for Traction Battery Cooling Parts See Owner's Manual" is displayed on the multi-information display, clean or replace the No. 1 HV battery intake filter, and clear the DTCs to reset the learning values even if no DTCs are output. for M20A-FXS: Click here for 2ZR-FXE: Click here |










