Air mix door cable
In this manual: Air mix door cable
10steps
~60min
3/5difficulty
Done 0 of 10
AIR MIX DOOR CABLE : Removal and Installation
REMOVAL
- Remove foot duct (LH). Refer to VTL "FOOT DUCT : Removal and Installation".
- Disconnect air mix door cable from A/C control.
- Disconnect air mix door cable from A/C unit assembly, and then remove air mix door cable.
INSTALLATION
Installation is in the reverse order of removal.
AIR MIX DOOR CABLE : Adjustment
- Remove cluster lid C. Refer to IP "Removal and Installation".
- Remove instrument lower panel LH. Refer to IP "Removal and Installation".
- Remove glove box. Refer to IP "Removal and Installation".
- Disconnect air mix door cable (1) from clamp (A).
- Set temperature control dial to full cold position.
- Push air mix door link (2) in the direction as shown, and then carefully pulling outer cable to A/C control side, and connect clamp.
- Operate temperature control dial to insure that inner cable moves smoothly.

CAUTION: When clamping the outer cable, do not move the inner cable.
Was this page helpful?