Front power window switch (passenger side)
Component Function Check
1. CHECK FUNCTION
Check front power window motor RH operation with front power window switch RH.
Is the inspection result normal?
YES >> Inspection End.
NO >> Refer to PWC "Diagnosis Procedure".
Diagnosis Procedure
Regarding Wiring Diagram information, refer to PWC "Wiring Diagram".
1.CHECK FRONT POWER WINDOW SWITCH RH INPUT SIGNAL
1. Turn ignition switch OFF.
2. Disconnect front power window switch RH connector.
3. Turn ignition switch ON.
4. Check voltage between front power window switch RH harness connector and ground.
Is the inspection result normal?
YES >> GO TO 3.
NO >> GO TO 2.
2.CHECK FRONT POWER WINDOW SWITCH RH CIRCUIT
1. Turn ignition switch OFF.
2. Disconnect power window main switch connector.
3. Check continuity between power window main switch harness connector and front power window switch RH harness connector.
4. Check continuity between power window main switch harness connector and ground.
Is the inspection result normal?
YES >> Replace power window main switch. Refer to PWC "Removal and Installation".
NO >> Repair or replace harness.
3.CHECK FRONT POWER WINDOW SWITCH RH
Check front power window switch RH.
Refer to PWC "Component Inspection".
Is the inspection result normal?
YES >> Check Intermittent incident. Refer to GI "Intermittent Incident".
NO >> Replace front power window switch RH. Refer to PWC "Removal and Installation".
Component Inspection
1.CHECK FRONT POWER WINDOW SWITCH RH
1. Turn ignition switch OFF.
2. Disconnect front power window switch RH connector.
3. Check front power window switch RH terminals under the following conditions.
Is the inspection result normal?
YES >> Inspection End.
NO >> Replace front power window switch RH. Refer to PWC "Removal and Installation".