Trunk lid striker
In this manual: Trunk lid striker
~1min read
TRUNK LID STRIKER : Removal and Installation
REMOVAL
1. Remove trunk rear plate. Refer to INT "TRUNK REAR PLATE : Removal and Installation".
2. Remove trunk lid opener cable bolt (A) and trunk lid striker bolts (B).

3. Remove trunk lid striker (1), disconnect trunk lid opener cable (2) from trunk lid striker and remove.

INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- After installation, check trunk lid open/close, lock/unlock operation.
- After installation, perform the trunk lid adjustment procedure. Refer to DLK "TRUNK LID ASSEMBLY : Adjustment".
Was this page helpful?