Fender cover
In this manual: Fender cover
2steps
~12min
1/5difficulty
Done 0 of 2
FENDER COVER : Removal and Installation
REMOVAL
- Fully open hood assembly.
- Disengage pawls beginning at the front of the fender cover and working toward the rear of vehicle and then remove front fender cover.
CAUTION: When performing the procedure after removing fender cover, protect the lower windshield glass with urethane etc.
: Pawl

INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- For installation, engage pawls to front fender and cowl top cover in numerical order shown.
- Install so that there is no clearance between windshield and cowl top cover.

FRONT DOOR
Exploded View

1. Front door assembly 2. Grommet 3. Striker bolt 4. Door striker 5. Bumper rubber 6. Door check link 7. Door hinge (lower) 8. Door hinge (upper) 9. Grommet (Drive side only)
Was this page helpful?