U0073 Communication bus a off
In this manual: U0073 Communication bus a off
2steps
~12min
1/5difficulty
Done 0 of 2
DTC Logic
| DTC | Trouble diagnosis name | DTC detecting condition | Possible causes |
| U0073 | Control Module Communication Bus "A" Off |
When the ignition switch is ON, TCM detects a bus-off error continuously for 2 seconds or more. | Harness or connector (CAN communication line is open or shorted) |
DTC CONFIRMATION PROCEDURE
1.PREPARATION BEFORE WORK
If another "DTC CONFIRMATION PROCEDURE" occurs just before, turn the ignition switch OFF and wait for at least 10 seconds, then perform the next test.
>> GO TO 2.
2.PERFORM DTC CONFIRMATION PROCEDURE
- Start engine and wait for at least 5 seconds.
- Check the DTC.
Is "U0073" detected?
YES >> Go to TM, "Diagnosis Procedure".
NO >> INSPECTION END
Diagnosis Procedure
For the diagnosis procedure, refer to LAN, "Trouble Diagnosis Flow Chart".
Was this page helpful?