U1000 CAN Comm circuit
In this manual: U1000 CAN Comm circuit
~1min read
DTC Logic
DTC DETECTION LOGIC
Diagnosis Procedure
1.PERFORM SELF DIAGNOSTIC RESULT
1. Turn ignition switch ON and wait for 2 seconds or more.
2. Perform Self Diagnostic Result for MULTI AV.
Is CAN COMM CIRCUIT displayed?
YES >> Refer to LAN "Trouble Diagnosis Flow Chart".
NO >> Refer to GI "Intermittent Incident".
U1010 CONTROL UNIT (CAN)
DTC Logic
DTC DETECTION LOGIC
| CONSULT Display | DTC Detection Condition | Possible Cause |
| CONTROL UNIT (CAN) [U1010] | Error during CAN controller hardware initialization (VCAN). | Replace the AV control unit if the malfunction occurs constantly. Refer to AV "Removal and Installation". |
U1217 AV CONTROL UNIT
DTC Logic
DTC DETECTION LOGIC
| CONSULT Display | DTC Detection Condition | Possible Cause |
| BLUETOOTH MODULE [U1217] | Connection failure to the internal Blueooth sub unit is detected. | Replace AV control unit if malfunction occurs constantly. Refer to AV "Removal and Installation". |
U1229 AV CONTROL UNIT
DTC Logic
DTC DETECTION LOGIC
| CONSULT Display | DTC Detection Condition | Possible Cause |
| iPod CERTIFICATION [U1229] | iPod authentication chip error. | Replace AV control unit if malfunction occurs constantly. Refer to AV "Removal and Installation". |
U122F AV CONTROL UNIT
DTC Logic
DTC DETECTION LOGIC
| CONSULT Display | DTC Detection Condition | Possible Cause |
| Digital broadcasting connection error [U122F] | Communication error with digital audio broadcast module internal to AV control unit. | Replace AV control unit if malfunction occurs constantly. Refer to AV "Removal and Installation". |
Was this page helpful?