Hood hinge
In this manual: Hood hinge
7steps
~42min
2/5difficulty
Done 0 of 7
HOOD HINGE : Removal and Installation
REMOVAL
- Remove hood assembly. Refer to DLK "HOOD ASSEMBLY : Removal and Installation".
- Remove hood support rod and grommet. Refer to DLK"HOOD SUPPORT ROD : Removal and Installation".
- Remove front fender. Refer to DLK "FRONT FENDER : Removal and Installation".
- Remove hood hinge bolts and remove hood hinge.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- Check hood hinge rotating point for poor lubrication. If necessary, apply a suitable multi-purpose grease.
- Perform hood fitting adjustment procedure. Refer to DLK "HOOD ASSEMBLY : Adjustment".
- After adjusting, apply touch-up paint (body color) onto the head of hood hinge bolts and nuts.

HOOD SUPPORT ROD
HOOD SUPPORT ROD : Removal and Installation
REMOVAL
- Support hood assembly using a suitable tool.
WARNING: Bodily injury may occur if hood assembly is not supported properly when removing hood support rod.
- Rotate and remove hood support rod from grommet.
- Release tab and remove grommet from hood hinge, if necessary.
INSTALLATION
Installation is in the reverse order of removal.
RADIATOR CORE SUPPORT
Exploded View

1. Radiator upper seal 2. Condenser side seal 3. Radiator side seal (RH) 4. Radiator side seal (LH) 5. Radiator core support lower 6. Radiator core support upper
Was this page helpful?