Service data and specifications (SDS)
In this manual: Service data and specifications (SDS)
~1min read
General Specification 
CAUTION:
- Use only Genuine NISSAN Matic S ATF. Do not mix with other ATF.
- Using ATF other than Genuine NISSAN Matic S ATF will cause deterioration of driveability and A/T durability, and may damage the A/T, which is not covered by the warranty.
*1: Refer to MA "Fluids and Lubricants".
*2: The fluid capacity is the reference value.
Vehicle Speed at Which Gear Shifting Occurs 
- At half throttle, the accelerator opening is 4/8 of the full opening.
Vehicle Speed at Which Lock-up Occurs/Releases 
- At closed throttle, the accelerator opening is less than 1/8 condition. (Closed throttle position signal OFF)
- At half throttle, the accelerator opening is 4/8 of the full opening.
Stall Speed
| Stall speed | 2,410 - 2,850 rpm |
Line Pressure 
Torque Converter
| Dimension between end of converter housing and torque converter | 16.2 mm (0.638 in) |
Was this page helpful?