Washer switch
In this manual: Washer switch
~1min read
Description
- Washer switch is integrated with combination switch.
- Washer switch supplies ground for the front washer motor.
Component Inspection
1. CHECK WASHER SWITCH
1. Turn the ignition switch OFF.
2. Disconnect combination switch (wiper and washer switch).
3. Check continuity between the combination switch (wiper and washer switch) terminals.
Is the inspection result normal?
YES >> Washer switch is normal.
NO >> Replace combination switch (wiper and washer switch). Refer to WW "Removal and Installation".
SYMPTOM DIAGNOSIS
WIPER AND WASHER SYSTEM SYMPTOMS
Symptom Table
CAUTION: Perform the self-diagnosis with CONSULT before performing the diagnosis by symptom. Perform the diagnosis by DTC if DTC is detected.


Was this page helpful?