Shift position indicator circuit
In this manual: Shift position indicator circuit
8steps
~48min
2/5difficulty
Done 0 of 8
Component Parts Function Inspection
1.CHECK SHIFT POSITION INDICATOR
- Start the engine.
- Shift the selector lever.
- Check that the selector lever position and the shift position indicator on the combination meter are identical.
Is the inspection result normal?
YES >> INSPECTION END
NO >> Go to TM "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK TCM INPUT/OUTPUT SIGNAL
With CONSULT
- Start the engine.
- Select "Data Monitor" in "TRANSMISSION".
- Select "RANGE".
- Shift the selector lever.
- Check that selector lever position, "RANGE" on the CONSULT screen, and shift position indicator display on the combination meter are identical.
Is the check result normal?
YES >> INSPECTION END
NO-1 ("RANGE" is changed but is not displayed on the shift position indicator.>>Check "Self Diagnostic Result" in "TRANSMISSION".
NO-2 ("RANGE" and shift position indicator are different.)>>Check "Self Diagnostic Result" in "TRANSMISSION".
NO-3 (Specific"RANGE" is not displayed on the shift position indicator.)>>Check "Self Diagnostic Result" in "METER/M&A".
Was this page helpful?