Vehicle speed sensing auto lock operation does not operate
In this manual: Vehicle speed sensing auto lock operation does not operate
8steps
~48min
2/5difficulty
Done 0 of 8
Diagnosis Procedure
1.CHECK AUTOMATIC LOCK/UNLOCK SELECT SETTING IN WORK SUPPORT
- Select DOOR LOCK of BCM using CONSULT.
- Select AUTOMATIC LOCK/UNLOCK SELECT in WORK SUPPORT mode.
- Check AUTOMATIC LOCK/UNLOCK SELECT setting in WORK SUPPORT.
Refer to BCS "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Set Lock Only or Lock/Unlock in WORK SUPPORT.
2.CHECK AUTOMATIC DOOR LOCK SELECT SETTING IN WORK SUPPORT
- Select DOOR LOCK of BCM using CONSULT.
- Select AUTOMATIC DOOR LOCK SELECT in WORK SUPPORT mode.
- Check AUTOMATIC DOOR LOCK SELECT setting in WORK SUPPORT.
Refer to BCS "DOOR LOCK : CONSULT Function (BCM - DOOR LOCK)".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Set VH SPD in AUTOMATIC DOOR LOCK SELECT.
3.REPLACE BCM
- Replace BCM. Refer to BCS "Removal and Installation".
- Confirm the operation after replacement.
Is the result normal?
YES >> Inspection End.
NO >> Check intermittent incident. Refer to GI "Intermittent Incident".
Was this page helpful?