Steering wheel
In this manual: Steering wheel
4steps
~24min
2/5difficulty
Done 0 of 4
Exploded View

1. Steering wheel
Removal and Installation
REMOVAL
NOTE: When reconnecting spiral cable, secure cable with a tape so that case and rotating part stay aligned. This will omit neutral position alignment procedure during spiral cable installation.
- Set vehicle to the straight-ahead position.
- Remove driver air bag module. Refer to SR "Removal and Installation".
- Remove steering wheel lock nut after steering is locked.
- Remove steering wheel using a suitable tool (A).

INSTALLATION
Installation is in the reverse order of removal.
- Check the spiral cable neutral position after replacing or rotating spiral cable. Refer to SR "Removal and Installation".
CAUTION:
- Do not twist spiral cable excessively after it becomes tight. (Twisting may cause the cable to be torn off.)
- Do not reuse steering wheel lock nut.
Was this page helpful?