Combination meter
In this manual: Combination meter
~1min read
Exploded View

1. Unified meter control unit 2. Front cover 3. Finisher
Disassembly and Assembly
DISASSEMBLY
1. Disengage the pawls of the finisher using a suitable tool and remove the finisher.\
2. Remove the screws of the front cover.
3. Disengage the pawls of the front cover using a suitable tool.
4. Pull the front cover straight out to remove from the unified meter control unit.\
CAUTION:
- Do not touch the display, pointer, the inside of front cover and the printed area of the dial during the work.
- Keep away from magnetic sources.
- Do not damage the front cover.
ASSEMBLY
Assembly is in the reverse order of disassembly.
CAUTION:
- Do not touch the display, pointer, the inside of front cover and the printed area of the dial during the work.
- Keep away from magnetic sources.
- Do not damage the front cover.
Was this page helpful?