Door check link
In this manual: Door check link
7steps
~42min
2/5difficulty
Done 0 of 7
DOOR CHECK LINK : Removal and Installation
REMOVAL
- Fully close the front door window.
- Remove front door finisher. Refer to INT "Removal and Installation".
- Remove front door speaker bolts.
- Disconnect harness connector from front door speaker and remove.
- Remove door check link bolt from body.
- Remove door check link bolts on door panel.
- Remove door check link (1) through the hole in door panel (2).

INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- After installation, check rear door open/close, lock/unlock operation.
- Check door check link rotating point for poor lubrication. If necessary, apply a multi-purpose grease.

REAR DOOR
Exploded View

1. Rear door panel 2. Grommet 3. Striker bolt 4. Door striker 5. Bumper rubber 6. Sealing screen (lower) (without door speaker) 7. Door check link 8. Door hinge (lower) 9. Door hinge (upper)
Was this page helpful?