Trunk lid hinge
In this manual: Trunk lid hinge
~1min read
TRUNK LID HINGE : Removal and Installation
REMOVAL
1. Remove harness clips (A) from trunk lid hinge (RH only) (1).

2. Remove trunk lid assembly. Refer to DLK "TRUNK LID ASSEMBLY : Removal and Installation".
3. Remove torsion bar. Refer to DLK "TORSION BAR : Removal and Installation".
4. Remove rear parcel shelf finisher. Refer to INT "Removal and Installation".
5. Remove trunk lid hinge bolts (body side) and then trunk lid hinge.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- After installation, check trunk lid open/close, lock/unlock operation.
- After installation, perform the trunk lid adjustment procedure. Refer to DLK "TRUNK LID ASSEMBLY : Adjustment".
- Apply touch-up paint (body color) onto the heads of trunk lid hinge bolts.
- Check trunk lid hinge rotating point for poor lubrication. If necessary, apply a suitable multi-purpose grease.

Was this page helpful?