U1000 CAN Comm circuit
In this manual: U1000 CAN Comm circuit
~1min read
DTC Logic
DTC DETECTION LOGIC 
Diagnosis Procedure
1.CHECK DTC DETECTION
With CONSULT.
1. Turn ignition switch OFF to ON.
2. Perform self diagnostic result.
Is DTC U1000 detected?
YES >> Proceed to diagnosis procedure. Refer to LAN "Trouble Diagnosis Flow Chart".
NO >> Refer to GI "Intermittent Incident".
U1010 CONTROL UNIT (CAN)
Description
Initial diagnosis of combination meter.
DTC Logic
DTC DETECTION LOGIC 
Diagnosis Procedure
1.REPLACE COMBINATION METER
Replace combination meter. Refer to MWI "Removal and Installation".
>> Inspection End.
Was this page helpful?