Warning chime function
In this manual: Warning chime function
2steps
~12min
1/5difficulty
Done 0 of 2
Description
Performs operation method guide and warning with buzzer.
Component Function Check
1.CHECK FUNCTION
With CONSULT
- Check the operation with "BUZZER" in the Active Test.
- Touch "IGN KEY WARN ALM", "SEAT BELT WARN TEST"or "LIGHT WARN ALM"on screen.
Is the inspection result normal?
YES >> Warning buzzer into combination meter is OK.
NO >> Refer to DLK "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK METER BUZZER CIRCUIT
Operate the hazard lights by turning ON the hazard warning switch.
Is the inspection result normal?
YES >> GO TO 2
NO >> Replace combination meter. Refer to MWI "Removal and Installation" (type B) or MWI "Removal and Installation" (type A).
2.CHECK INTERMITTENT INCIDENT
Refer to GI "Intermittent Incident".
>> Inspection End.
Was this page helpful?