Front door finisher
In this manual: Front door finisher
4steps
~24min
2/5difficulty
Done 0 of 4
Exploded View

1. Front door panel 2. Front door finisher 3. Main power window and door lock/ unlock switch finisher (if equipped) 4. Front door corner finisher 5. Grommet
Metal clip
Clip
Pawl
Removal and Installation
REMOVAL
- Fully open front door window.
- Remove front door corner finisher. Refer to MIR "FRONT DOOR CORNER FINISHER : Removal and Installation".
- Remove power window and door lock/unlock switch and finisher as an assembly (if equipped). Refer to PWC "Removal and Installation" (LH) or PWC "Removal and Installation" (RH).
- Remove front door finisher.
a. Remove front door finisher bolt (A).

b. Release front door finisher clips and metal clips using a suitable tool (A) and remove front door finisher as shown.
: Clip
: Metal clip
CAUTION: Apply protective tape (B) on the door panel and/or door finisher to protect from damage.

INSTALLATION
Installation is in the reverse order of removal.
CAUTION: When installing front door finisher, make sure the clips and metal clips are securely pressed into door panel holes.
Was this page helpful?