Shift lock system
Component Function Check
1.CHECK SHIFT LOCK OPERATION (BRAKE PEDAL RELEASED)
- Ignition switch ON.
- Attempt to shift selector lever to any position other than Park with brake pedal released.
Can the selector lever be shifted?
YES >> Go to TM "Diagnosis Procedure".
NO >> GO TO 2.
2.CHECK SHIFT LOCK OPERATION (BRAKE PEDAL APPLIED)
Attempt to shift the selector lever to any position other than Park with brake pedal applied.
Can the selector lever be shifted?
YES >> Inspection End.
NO >> Go to TM "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK STOP LAMP SWITCH
- Ignition switch ON.
- Check voltage between stop lamp switch connector E13 terminal 4 and ground.

Is the inspection result normal?
YES >> GO TO 2.
NO >> GO TO 4.
2.CHECK A/T SHIFT SELECTOR
Check voltage between A/T shift selector connector M37 terminal 6 and ground. 
Is the inspection result normal?
YES >> GO TO 3.
NO >> GO TO 5.
3.CHECK GROUND CIRCUIT
- Ignition switch OFF.
- Disconnect A/T shift selector connector.
- Check continuity between A/T shift selector connector M37 terminal 6 and ground.

Is the inspection result normal?
YES >> Replace A/T shift selector. Refer to TM "Removal and Installation".
NO >> Repair or replace ground circuit.
4.CHECK STOP LAMP SWITCH POWER CIRCUIT
Check voltage between stop lamp switch connector E13 terminal 3 and ground. 
Is the inspection result normal?
YES >> Replace stop lamp switch.
NO >> Repair or replace power circuit.
5.CHECK A/T SHIFT SELECTOR POWER CIRCUIT
Check voltage between A/T shift selector connector M37 terminal 5 and ground. 
Is the inspection result normal?
YES >> Replace A/T shift selector. Refer to TM "Removal and Installation".
NO >> Repair or replace power circuit.
System symptom
Symptom Table
The diagnosis item numbers show the sequence for inspection. Inspect in order from item 1.
CAUTION: If any malfunction occurs in the RE4F03C transmission, replace the transaxle assembly.











