Trunk lid lock
In this manual: Trunk lid lock
~1min read
TRUNK LID LOCK : Removal and Installation
REMOVAL
1. Remove trunk lid finisher (if equipped). Refer to INT "Removal and Installation".
2. Release rod holder (1) by lifting upward, and then separate trunk lid lock rod (3) from trunk lid lock assembly (2).

3. Remove trunk lid lock assembly bolts.
4. Disconnect harness connector and then remove trunk lid lock assembly (1).

INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- After installation, check trunk lid open/close, lock/unlock operation.
- Check trunk lid lock assembly for poor lubrication. Apply a suitable multi-purpose grease to trunk lid lock if necessary.

Was this page helpful?