Combination meter buzzer
In this manual: Combination meter buzzer
3steps
~18min
2/5difficulty
Done 0 of 3
Component Function Check
1.CHECK FUNCTION
- Select INTELLIGENT KEY of BCM using CONSULT.
- Select INSIDE BUZZER in ACTIVE TEST mode.
- Touch Key, Knob or Take Out to check that it works normally.
Is the inspection result normal?
Yes >> Combination meter buzzer is OK.
No >> Refer to DLK "Diagnosis Procedure".
Diagnosis Procedure
1.CHECK METER BUZZER CIRCUIT
Refer to WCS "Component Function Check".
Is the inspection result normal?
Yes >> GO TO 2.
No >> Repair or replace harness.
2.CHECK INTERMITTENT INCIDENT
Refer to GI "Intermittent Incident".
>> Inspection End.
Was this page helpful?