Map lamp
Exploded View

1. Map lamp bulb housing 2. Bulb 3. Lens
Pawl
Removal and Installation
WARNING: Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION: Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
REMOVAL
1. Release lens pawls using suitable tool (A) and remove.
CAUTION: Apply protect tape (B) on suitable tool (A).
: Pawl

2. Release map lamp housing pawl using suitable tool (A).
CAUTION: Apply protect tape (B) on suitable tool (A).
: Pawl
3. Disconnect the harness connector from map lamp and remove.

INSTALLATION
Installation is in the reverse order of removal.
Bulb Replacement
WARNING: Do not touch bulb with your hand while it is on or right after being turned off. Burning may result.
CAUTION:
- Do not touch the glass surface of the bulb with bare hands or allow oil or grease to get on it to prevent damage to the bulb.
- Leaving the bulb removed from housing for a long period of time can deteriorate performance of the lens and reflector (causing dirt or clouding). Always prepare a new bulb and have it on hand when replacing the bulb.
MAP LAMP BULB
Removal
1. Release lens pawls using suitable tool (A) and remove.
CAUTION: Apply protect tape (B) on suitable tool (A).
Pawl

2. Remove the bulb.
Installation
Installation is in the reverse order of removal.