Secondary speed sensor
In this manual: Secondary speed sensor
5steps
~30min
2/5difficulty
Done 0 of 5
Exploded View

1. Transaxle assembly 2. O-ring 3. Secondary speed sensor
Front
: Genuine NISSAN CVT Fluid NS-3
Removal and Installation
REMOVAL
- Remove the front LH wheel and tire. Refer to WT "Adjustment".
- Remove the fender protector (LH). Refer to EXT "Removal and Installation".
- Disconnect the harness connector from secondary speed sensor.
- Remove the secondary speed sensor.
- Remove the O-ring from the secondary speed sensor.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION:
- Do not reuse O-ring.
- Apply Genuine NISSAN CVT Fluid NS-3 to the O-ring.
Inspection and Adjustment
INSPECTION AFTER INSTALLATION
Check for CVT fluid leakage. Refer to TM "Inspection".
ADJUSTMENT AFTER INSTALLATION
Adjust the CVT fluid level. Refer to TM "Adjustment".
Was this page helpful?