Low tire pressure warning lamp does not turn on
In this manual: Low tire pressure warning lamp does not turn on
~1min read
Diagnosis Procedure
NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.
- Activate and display TPMS transmitter IDs
- Display tire pressure reported by the TPMS transmitter
- Read TPMS DTCs
- Register TPMS transmitter IDs
1.PERFORM SELF DIAGNOSTIC RESULT
Perform "SELF DIAGNOSTIC RESULT".
Is DTC "U1000" detected?
YES >> Malfunction in CAN communication system. Refer to LAN "Trouble Diagnosis Flow Chart".
NO >> GO TO 2
2.CHECK COMBINATION METER
Check combination meter operation. Refer to MWI "CONSULT Function" (type B) or MWI "CONSULT Function" (type A).
Is the inspection result normal?
YES >> Replace BCM. Refer to BCS "Removal and Installation" or BCS "Removal and Installation".
NO >> Replace combination meter. Refer to MWI "Removal and Installation" (type B) or MWI "Removal and Installation" (type A).
Was this page helpful?