Key reminder function does not operate
Diagnosis Procedure
1.CHECK ANTI KEY LOCK IN FUNCTI SETTING IN WORK SUPPORT
- Select INTELLIGENT KEY of BCM using CONSULT.
- Select ANTI KEY LOCK IN FUNCTI in WORK SUPPORT mode.
- Check ANTI KEY LOCK IN FUNCTI setting in WORK SUPPORT.
Refer to BCS "INTELLIGENT KEY : CONSULT Function (BCM - INTELLIGENT KEY)".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Set On in ANTI KEY LOCK IN FUNCTI.
2.CHECK DOOR SWITCH
Check door switch.
Refer to DLK "Component Function Check".
Is the inspection result normal?
YES >> GO TO 3.
NO >> Repair or replace the malfunctioning parts.
3.CHECK INSIDE KEY ANTENNA
Check inside key antenna.
- Instrument center: Refer to DLK "DTC Logic".
- Console: Refer to DLK "DTC Logic".
- Trunk room: Refer to DLK "DTC Logic".
Is the inspection result normal?
YES >> GO TO 4.
NO >> Repair or replace the malfunctioning parts.
4.CHECK UNLOCK SENSOR
Check unlock sensor.
Refer to DLK "Component Function Check".
Is the inspection result normal?
YES >> GO TO 5.
NO >> Repair or replace the malfunctioning parts.
5.REPLACE BCM
- Replace BCM. Refer to BCS "Removal and Installation".
- Confirm the operation after replacement.
Is the result normal?
YES >> Inspection End.
NO >> Check intermittent incident. Refer to GI "Intermittent Incident".