Power window main switch
In this manual: Power window main switch
~1min read
Removal and Installation
REMOVAL
1. Remove main power window and door lock/unlock switch finisher assembly using a suitable tool (A).
Pawl

2. Disconnect the harness connector from the main power window and door lock/unlock switch.
3. Separate main power window and door lock/unlock switch (1) from main power window and door lock/unlock switch finisher using a suitable tool.
CAUTION: Do not bend back the pawls on the switch finisher too far or breakage may occur.

INSTALLATION
Installation is in the reverse order of removal.
Was this page helpful?