Mode door cable
In this manual: Mode door cable
8steps
~48min
2/5difficulty
Done 0 of 8
MODE DOOR CABLE : Removal and Installation
REMOVAL
- Remove A/C unit assembly. Refer to HA "Removal and Installation".
- Disconnect mode door cable from A/C control.
- Disconnect mode door cable from A/C unit assembly, and then remove mode door cable.
INSTALLATION
Installation is in the reverse order of removal.
MODE DOOR CABLE : Adjustment
- Remove A/C unit assembly. Refer to HA "Removal and Installation".
- Disconnect mode door cable (1) from clamp (A).
- Set mode dial to VENT position.
- Push main link (2) in the direction as shown, and then carefully pulling outer cable to A/C control side, and connect clamp.
- Operate mode dial to insure that inner cable moves smoothly.

CAUTION: When clamping the outer cable, do not move the inner cable.
Was this page helpful?