Kicking plate inner
KICKING PLATE INNER : Removal and Installation
FRONT KICKING PLATE
Removal
1. Release front kicking plate pawls using a suitable tool (A) and remove front kicking plate as shown.
CAUTION: Apply protective tape (B) to the body as shown before releasing the pawls on the outer ends.
: Pawl

Installation
Installation is in the reverse order of removal.
CAUTION: When installing rear kicking plate, make sure that metal clips are securely pressed in body panel holes.
REAR KICKING PLATE
Removal
- Remove rear seat cushion. Refer to SE "Removal and Installation - Seat Cushion Assembly".
- Remove rear kicking plate clip (A).

3. Lift rear end of rear kicking plate to disengage rear kicking plate metal clips, then rotate front end of rear kicking plate to disengage rear kicking plate pawls and remove rear kicking plate.
: Metal clip
: Pawl

Installation
Installation is in the reverse order of removal.
CAUTION: When installing rear kicking plate, make sure that metal clips are securely pressed in body panel holes.