Security indicator lamp does not turn on or blink
In this manual: Security indicator lamp does not turn on or blink
~1min read
Description
Security indicator lamp does not blink when power supply position is other than the ON position.
NOTE:
- Before performing the diagnosis, perform "Work Flow". Refer to SEC "Work Flow".
- Check that vehicle is under the condition shown in "Conditions of vehicle" before starting diagnosis, and check each symptom.
Conditions of Vehicle (Operating Conditions) Power supply position is other than the ON position.
Diagnosis Procedure
1.CHECK SECURITY INDICATOR LAMP
Check security indicator lamp.
Refer to DLK "Component Function Check".
Is the inspection result normal?
YES >> GO TO 2.
NO >> Repair or replace the malfunctioning parts.
2.CONFIRM THE OPERATION
Confirm the operation again.
Is the result normal?
YES >> Check intermittent incident. Refer to GI"Intermittent Incident".
NO >> GO TO 1.
REMOVAL AND INSTALLATION
Was this page helpful?