Mixture ratio selflearning value clear
In this manual: Mixture ratio selflearning value clear
10steps
~60min
3/5difficulty
Done 0 of 10
Description
This describes how to erase the mixture ratio selflearning value. For the actual procedure, follow the instructions in "Diagnosis Procedure".
Work Procedure
1.START
With CONSULT
- Start engine and warm it up to normal operating temperature.
- Select "SELFLEARNING CONT" in "WORK SUPPORT" mode with CONSULT.
- Clear mixture ratio selflearning value by touching "CLEAR".
With GST
- Start engine and warm it up to normal operating temperature.
- Turn ignition switch OFF.
- Disconnect mass air flow sensor harness connector.
- Restart engine and let it idle for at least 5 seconds.
- Stop engine and reconnect mass air flow sensor harness connector.
- Select Service $03 with GST. Make sure DTC P0102 is detected.
- Select Service $04 with GST to erase the DTC P0102.
>> END
Was this page helpful?